Plastic Film Capacitors Metallized Polypropylene Film Capacitors Type: MKP for DC-link EZPE 1100VDC Series Non-inductive construction using metalized polypropylene film with flame retardant epoxy resin and case. Features High safety, Self-healing and Self-protecting function built-in Long product life, High reliability Low loss, Low ESR Flame retardant (Case and sealing resin) RoHS directive compliant Recommended Applications For DC filtering, DC link circuit Solar inverters Wind power generation Industrial power supplies Resonance circuit for power supply Inverter circuit in appliances (Air Conditioners etc.) Construction Dielectric Electrodes Plastic case Sealing Terminals : Polypropylene film : Metallized dielectric with segmented pattern : UL94 V-0 : UL94 V-0 : Tinned wires, 4-pin versions Explanation of Part Numbers 1 2 3 4 E Z P E Product code 5 Dielectric & construction 6 7 8 Rated voltage 1B Capacitance 1100 VDC 9 10 Pin type M 11 12 T A Suffix Suffix 4-pin type Specifications Category temperature range ( TC ) Rated voltage (VR) ( *1 ) ( *2 ) 40 to + 85 1100 VDC ( 920 VDC at 85 ; Derating of rated voltage at more than 70 Rated capacitance ( CR ) 10 F to 40 F Capacitance tolerance ± 10 % Withstanding DC voltage Between terminals : Rated voltage (VDC) × 150 % 10 s Terminal to case : 2110 VAC ( 50 Hz or 60 Hz ) 10 s Insulation resistance ( CR ) CR 10,000 F ( 20 , 500 VDC, 60 s ) *1 : The temperature of capacitor surface (case) *2 : Use for DC voltage only *3 : Refer to the page of “ DC voltage derating ” Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. (*3) ) Dimensions in mm (not to scale) Plastic Film Capacitors (a) (b) (a) (b) (c) (c) Rated voltage Capacitance Lot No. Rating, Dimensions & Quantity / Ammo Box Type EZPE Rated voltage : 1100 VDC at 70 ( 920VDC at 85 Dimensions [mm] Part Number CR [ F] W H L P1 ) Permissible current P2 dv/dt [V/ s] Peak Current [Ao-p] RMS Current [Arms] ESRtyp [m ] tan [%] Mass [g] MOQ [pcs] ( *1 ) ( *3 ) ( *4 ) ( *5 ) ( *2 ) EZPE1B106MTA 10 20 42 41.5 37.5 10.2 1.2 54 540 7.0 12.3 0.20 43 600 EZPE1B156MTA 15 30 51 41.5 37.5 10.2 1.2 54 810 8.5 8.2 0.20 80 400 EZPE1B206MTA 20 30 51 41.5 37.5 20.3 1.2 54 1080 10.0 6.3 0.20 76 400 EZPE1B256MTA 25 30 51 57.5 52.5 10.2 1.2 35 875 8.0 10.7 0.28 107 200 EZPE1B306MTA 30 30 51 57.5 52.5 20.3 1.2 35 1050 9.0 8.5 0.28 103 200 EZPE1B356MTA 35 35 56 57.5 52.5 20.3 1.2 35 1225 10.0 7.2 0.28 137 200 EZPE1B406MTA 40 35 56 57.5 52.5 20.3 1.2 35 1400 11.0 6.5 0.28 134 200 *1 : When rising temperature of capacitor surface by continuous peak current (included pulse current), use within limit specified for temperature of capacitor surface and self heating temperature rise. *2 : Maximum RMS current @ 70 , 10 kHz Use within limit for self heating temperature rise at capacitor surface. *3 : Typical values @ 20 , 10 kHz ESR : less than 2.5 × ESRtyp *4 : Maximum dissipation factor @20 , 1 kHz *5 : Minimum order quantity consists of 4 packing units. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. Permissible Conditions Plastic Film Capacitors Permissible Voltage These capacitors are designed only for DC voltage, so should not be used for AC line. Use the peak voltage (Vo-p) within the rated voltage. Use the peak to peak voltage (Vp-p) within 0.2 x VR . VR Vo-p = Vp+ Vp-p = 0.2 × VR Vp- DC Voltage, Peak current and RMS current derating Derating of voltage (Vo-p), RMS current (Arms), and peak current (Ao-p) according to the following diagram when the temperature of the capacitor surface exceeds 70 . Permissible voltage (Vo-p) 1100 1000 900 800 700 600 60 65 70 75 80 85 90 95 100 Percentage to the permissible current (%) DC Voltage derating 1200 Current derating Temperature of capacitor surface TC ( ) Temperature of capacitor surface TC ( ) Total cycles applied peak current Permissible self heating temperature rise is within following diagram when the temperature of the capacitor surface exceeds 70 . Total cycles applied peak current (Ao-p) (including pulse current) are within following diagram. 6 &' % Permissible self temp. rise 5 4 3 2 1 0 60 65 70 75 80 85 90 95 100 Temperature of capacitor surface TC ( ) Percentage to the permissible peak current (%) Permissible self heating temperature rise $ # " ! $ $ $ $ Total cycles Please consult Panasonic if your condition exceeds the above spec. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. $ Characteristics ( Reference ) Plastic Film Capacitors Temperature Characteristics at 1kHz +.- Capacitance Dissipation factor (typical curve) (typical curve) at 1kHz 1.0 0.9 0.8 / tan (%) C/C (%) 0.7 - : 0.6 0.5 0.4 0.3 */ 0.2 40uF 20uF 10uF 0.1 *,+.- *0-1*2-1*3-- 0.0 3-42-0-65-7+ --8+93- -60 -40 -20 0 Insulation resistance at 500VDC 40 60 80 100 120 Temperature ( ) Temperature ( ) ;< =>@?,G 20 (typical curve) ;< =>@?@F F) ;< =>@?@E C R( O O ;< =>@?D ;< =>@?@C ;< =>@?@B ;< =>@?A; ;< =>@?? H F? H D? H B?I? B?JD?KF?KL?M;?@?N;B? Temperature ( ) Frequency Characteristics Lifetime expectancy Impedance vs. Frequency Lifetime expectancy (typical curve) 1200 100 Unpredictable life time area 1100 10 Permissible voltage (Vo-p) TQRS Impedance ( ) PQRS UQRS 1 0.1 0.01 Tc=70 V 1000 900 Tc=85 V 800 700 600 500 Tc=105 V ( I = 0Arms) 400 0.001 1 10 100 Frequency (kHz) 1000 10000 1000 10000 100000 1000000 Lifetime expectancy (h) * Life time : reach W C/C = - 10 % , Judgement of Panasonic Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.