UTC MBR20150CL-TQ2-T Schottky barrier rectifier Datasheet

UNISONIC TECHNOLOGIES CO., LTD
MBR20150C
DIODE
SCHOTTKY BARRIER
RECTIFIER

DESCRIPTION
The UTC MBR20150C is a Schottky Barrier Rectifier with high
junction temperature capacity.

FEATURES
* Good trade off between leakage current and forward voltage drop
* High junction temperature capability
* Low leakage current

SYMBOL

ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
MBR20150CL-TA3-T
MBR20150CG-TA3-T
MBR20150CL-TF3-T
MBR20150CG-TF3-T
MBR20150CL-TF1-T
MBR20150CG-TF1-T
MBR20150CL-TQ2-T
MBR20150CG-TQ2-T
MBR20150CL-TQ2-R
MBR20150CG-TQ2-R
Note: Pin Assignment: A: Anode
K: Cathode

Package
TO-220
TO-220F
TO-220F1
TO-263
TO-263
Pin Assignment
1
2
3
A
K
A
A
K
A
A
K
A
A
K
A
A
K
A
Packing
Tube
Tube
Tube
Tube
Tape Reel
MARKING
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
1 of 3
QW-R601-030.G
MBR20150C

DIODE
ABSOLUTE MAXIMUM RATING (TA=25°C, unless otherwise specified)
PARAMETER
Recurrent Peak Reverse Voltage
RMS Voltage
DC Blocking Voltage
Average Forward Rectified Output Per Leg
Current
Total
Non-Repetitive Peak Forward Surge Current
8.3ms Single Half-Sine-Wave
Junction Capacitance (Note 4)
Junction Temperature
Storage Temperature

SYMBOL
VRRM
VR(RMS)
VR
UNIT
V
V
V
IFSM
150
A
CJ
TJ
TSTG
320
-55 ~ +150
-55 ~ +150
pF
°C
°C
SYMBOL
θJA
RATINGS
60
2
4
UNIT
°С/W
°С/W
°С/W
IO
A
THERMAL DATA
PARAMETER
Junction to Ambient
Junction to Case

RATINGS
150
105
150
10
20
TO-220/TO-263
TO-220F/TO-220F1
θJC
ELECTRICAL CHARACTERISTICS
PARAMETER
SYMBOL
TEST CONDITIONS
MIN TYP MAX UNIT
IF=10A, TC=25°C
0.92
V
IF=10A, TC=125°C
0.8
V
Instantaneous Forward Voltage Drop
VF
(Note 3)
IF=20A, TC=25°C
1.05
V
IF=20A, TC=125°C
1
V
Rated DC Voltage, TC=25°C
0.20
Instantaneous Reverse Current (Note 3)
IR
mA
Rated DC Voltage, TC=125°C
5
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. 2.0μs Pulse Width, f = 1.0KHz.
3. Pulse Test: Pulse Width=300µs, Duty Cycle≤ 2.0%.
4. Applied VR = 4.0V and f = 1.0MHz.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 3
QW-R601-030.G
MBR20150C
DIODE
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 3
QW-R601-030.G
Similar pages