MA-COM MA4P278-287T Surface mount plastic pin diode Datasheet

SMPP Series
Surface Mount Plastic PIN Diodes
Rev. V22
Features
The MA4P277/MA4P7437/MADP-007437 series and
MA4P278/MA4P7438/MADP-007438 series device
have thicker intrinsic regions to provide lower distortion in attenuator circuits.
 Industry Standard Surface Mount Packages
 Lead-Free (RoHS Compliant) Equivalents
Available with 260 C Reflow Compatibility
 Low Loss, High Isolation Switching Diodes
 Low Distortion Attenuator Diodes
 Single and Dual Diode Configurations
 Tape and Reel Packaging
The MA4P290/MADP-007167 series devices have
the thickest I-Region, offering the lowest distortion
and highest IP3 for current controlled attenuator circuits. These devices are ideal for AGC functions for
infrastructure and CATV applications.
Description and Applications
These parts are available as single diodes, series
tees (ST), series tee reverse (STR), common
cathode pairs (CK), common anode pairs (CA), and
unconnected pairs in the respective featured
packages.
M/A-COM offers silicon PIN diodes in five standard,
low cost, surface mount plastic packages for use as
switches and attenuators. These diodes are offered
with standard Sn/Pb plating, as well as with 100%
matte Sn plating on our RoHS compliant devices.
M/A-COM’s PIN diodes feature a variety of I-region
lengths resulting in lower resistance, and lower
capacitance devices for various microwave control
circuit applications.
M/A-COM’s PIN diodes are available in the SOT-23
(case style 287), the SOT-143 (case style 1068), the
SOT-323/SC-70 (3L) (case style 1146), the
SOD-323 (case style 1141), and the
SC-79 (case style 1279) packages. These packages
are supplied on tape and reel for automatic pick and
place assembly. The tape and reel suffix designation
is a “T” at the end of the part number.
The MA4P275/MA4P7436/MADP-007436 series
offer the lowest series resistance for best performance as low loss series switches and high isolation
shunt switches.
The MA4P789/ MA4P7433/MADP-007433 series
have the lowest capacitance and offers the highest
isolation in series and series-shunt switches through
3GHz.
The MA4P282/ MA4P7447/MADP-007155 series,
the MA4P274/MA4P7455/ MADP-007455 series and
the MADP-007448 series are general purpose PIN
diodes useful as either switches or attenuators.
Package Outlines
SOT-23
SOT-143
SOT-323
SOD-323
SC-79
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
SMPP Series
Surface Mount Plastic PIN Diodes
Rev. V22
Absolute Maximum Ratings @ 25 °C1 (Unless Otherwise Noted)
Absolute
Maximum
Parameter
Operating Temperature
-65C to +150 C
Storage Temperature
-65C to +125 C
Junction Temperature
+ 175 C
RF C.W. Incident Power @ 25 °C:
MA4P282 / MA4P7447/MADP-007155 Series(  die = 15 °C/ W ), RF & DC Incident De-rating Coefficient = - 21.3 mW / °C
MA4P275 / MA4P7436/MADP-007436 Series(  die = 25 °C/ W ), RF & DC Incident De-rating Coefficient = - 16.8 mW / °C
MA4P278 / MA4P7438/MADP-007438Series (  die = 30 °C/ W ), RF & DC Incident De-rating Coefficient = - 13.3 mW / °C
MA4P274 / MA4P7455/MADP-007455 Series (  die = 35 °C/ W ), RF & DC Incident De-rating Coefficient = - 13.3 mW / °C
MA4P277 / MA4P7437/MADP-007437 Series (  die = 45 °C/ W ), RF & DC Incident De-rating Coefficient = - 13.3 mW / °C
MA4P290 / MADP-007167 Series (  die = 55 °C/ W ), RF & DC Incident De-rating Coefficient = - 13.3 mW / °C
MA4P789 / MA4P7433/MADP-007433 Series(  die = 80 °C/ W ), RF & DC Incident De-rating Coefficient = - 10.7 mW / °C
MADP-007448 Series(  die = 80 °C/ W ), RF & DC Incident De-rating Coefficient = - 10.7 mW / °C
+ 32 dBm
+ 31 dBm
+ 30 dBm
+ 30 dBm
+ 30 dBm
+ 30 dBm
+ 29 dBm
+ 32 dBm
Total ( RF + DC ) Power Dissipation @ 25 C
( SOT-23, SOT-143 ) : RF & DC Dissipated De-rating Coefficient = - 33.3 mW / C
( SOT-323, SOD-323, SC-79 ) : RF & DC Dissipated De-rating Coefficient = - 26.7 mW / C
250 mW
200 mW
Reverse Voltage
Voltage Rating
Forward Current
150 mA DC
1. Operation of these devices above any one of these parameters may cause permanent damage.
Electrical Specifications @ 25C
Nominal Characteristics
Standard
Part
Number
MA4P275
MA4P789
MA4P282
RoHS Compliant
Part Number
MA4P7436
MADP-007436 Series
MA4P7433
MADP-007433 Series
MA4P7447
MADP-007155 Series
MADP-007448 Series
MA4P274
MA4P277
MA4P278
MA4P290
MA4P7455
MADP-007455 Series
MA4P7437
MADP-007437 Series
MA4P7438
MADP-007438 Series
MADP-007167
Reverse
Voltage2
(V)
Total
Capacitance 3
Max.
(pF)
RS @ 10 mA 4
Max.
(Ohms)
Carrier Lifetime 5
(s)
I-Region
Thickness
(mils)
75
1.00 @ 20V
0.5
0.2
0.4
75
0.35 @ 20V
1.5
0.2
0.4
100
1.20 @ 20V
0.6
1.0
0.8
100
0.25 @ 50V
2.0
0.4
0.6
100
0.35 @ 50V
3.0
1.0
2.0
200
0.35 @ 50V
6.0
2.0
4.0
200
0.35 @ 50V
10.0
3.0
5.0
200
0.30 @ 50V
16.0
3.0
7.0
2. The reverse current will not exceed 10 A at the reverse voltage rating.
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
SMPP Series
Surface Mount Plastic PIN Diodes
Rev. V22
Packaging and Configurations
Single
Single
SC-79
Standard
Part Number
SOD-323
RoHS Compliant
Part Number
Standard
Part Number
SOT-23
RoHS Compliant
Part Number
Standard
Part Number
RoHS Compliant
Part Number
MADP-007436-12790T
MA4P7436-1141T
MA4P275-287T
MA4P7436-287T
MADP-007433-12790T
MA4P7433-1141T
MA4P789-287T
MA4P7433-287T
MA4P7447-1141T
MA4P282-287T
MA4P7447-287T
MADP-007448-12790T
MADP-007448-11410T
MADP-007455-12790T
MA4P7455-1141T
MA4P274-287T
MADP-007448-0287AT
MA4P7455-287T
MA4P7437-1141T
MA4P277-287T
MA4P7437-287T
MA4P7438-1141T
MA4P278-287T
MA4P7438-287T
MADP-007167-11410T
MA4P290-287T
LS = 1.3 nH
LS = 1.4 nH
CP = 0.10 pF
CP = 0.11 pF
CP = 0.12 pF
Common Cathode
SOT-23
Common Anode
SC70 (3L)
RoHS
SOT-23
Compliant
Part Number
Standard
Part Number
MA4P275CK287T
MA4P7436CK287T
MA4P275CK1146T
MA4P7436CK1146T
MA4P275CA287T
MA4P289CK287T
MA4P7433CK287T
MA4P789CK1146T
MA4P7433CK1146T
MA4P282CK287T
MA4P7447CK287T
Standard
Part Number
MADP-007167-0287AT
LS = 0.6 nH
RoHS ComStandard
pliant
Part Number
Part Number
MA4P7455CK287T
MA4P277CK287T
RoHS
Compliant
Part Number
MA4P7436CA-287T
MA4P275CA1146T
MA4P7436CA1146T
MA4P789CA287T
MA4P7433CA-287T
MA4P789CA1146T
MA4P7433CA1146T
MA4P282CA287T
MA4P7447CA-287T
Compliant
Part Number
MADP-0074480287GT
MA4P274CK1146T
MA4P7455CK1146T
RoHS
Standard
Part Number
MADP-0074480287FT
MA4P274CK287T
SC70 (3L)
MA4P274CA287T
MA4P7455CA-287T
MADP-0074370287FT
MA4P277CA287T
MA4P7437CA-287T
MA4P278CK287T
MADP-0074380287FT
MA4P278CA287T
MA4P7438CA-287T
MA4P290CK287T
MADP-0071670287FT
MADP-0074481146GT
MA4P274CA1146T
MA4P7455CA1146T
MADP-0071670287GT
LS = 1.4 nH
LS = 1.3 nH
LS = 1.4 nH
LS = 1.3 nH
CP = 0.12 pF
CP = 0.12 pF
CP = 0.12 pF
CP = 0.12 pF
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
SMPP Series
Surface Mount Plastic PIN Diodes
Rev. V22
Packaging and Configurations
Series Tee
Series Tee Reverse
SOT-23
Standard
Part Number
SC70 (3L)
SOT-23
RoHS
Standard
RoHS
Standard
Compliant Part Number Compliant Part Number
Part Number
Part Number
SC70 (3L)
RoHS
Compliant
Part Number
Standard
Part Number
RoHS
Compliant
Part Number
MA4P275ST287T
MA4P7436ST287T
MA4P275ST1146T
MA4P7436ST1146T
MA4P275STR287T
MADP-0074360287DT
MA4P275STR1146T
MADP-0074361146DT
MA4P789ST287T
MA4P7433ST287T
MA4P789ST1146T
MA4P7433ST1146T
MA4P789STR287T
MADP-0074330287DT
MA4P789STR1146T
MADP-0074331146DT
MA4P282ST287T
MA4P7447ST287T
MA4P282STR287T
MADP-0071550287DT
MADP-0074480287BT
MA4P274ST287T
MA4P7455ST287T
MA4P277ST287T
MA4P278ST287T
MADP-0074481146BT
MA4P274ST1146T
MA4P7455ST1146T
MADP-0074480287DT
MA4P274STR287T
MADP-0074550287DT
MADP-0074370287BT
MA4P277STR287T
MADP-0074370287DT
MADP-0074380287BT
MA4P278STR287T
MADP-0074380287DT
MADP-0071670287BT
MA4P290STR287T
MADP-0071670287DT
MADP-0074481146DT
MA4P274STR1146T
MADP-0074551146DT
LS = 1.4 nH
LS = 1.3 nH
LS = 1.4 nH
LS = 1.3 nH
CP = 0.12 pF
CP = 0.12 pF
CP = 0.12 pF
CP = 0.12 pF
Low Inductance
Unconnected Pair
SOT-23
SOT-143
Standard
Part Number
RoHS Compliant
Part Number
Standard
Part Number
RoHS Compliant
Part Number
MA4P290-LI-287T
MADP-007167-0287HT
MA4P275-1068T
MA4P7436-1068T
MADP-007433-0287HT
MA4P789-1068T
MA4P7433-1068T
MADP-007448-1068ET
MA4P274-1068T
MA4P7455-1068T
LS = 0.4 nH
LS = 1.3 nH
CP = 0.12 pF
CP = 0.12 pF
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
SMPP Series
Surface Mount Plastic PIN Diodes
Rev. V22
Resistance vs Forward Current
(MA4P274 / MA4P7455 MADP-007155 Series)
Resistance vs Forward Current
(MA4P275 / MA4P7436 /MADP-007436 Series)
Series Resistance ()
Series Resistance ()
Typical Forward Resistance vs DC Bias Current Curves @ 100 MHz
Resistance vs Forward Current
(MA4P277 / MA4P7437 /MADP-007437 Series)
Resistance vs Forward Current
(MA4P278 / MA4P7438 /MADP-007438 Series)
Series Resistance ()
Forward Bias Current
Series Resistance ()
Forward Bias Current
Forward Bias Current
Forward Bias Current
5
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
SMPP Series
Surface Mount Plastic PIN Diodes
Rev. V22
Resistance vs Forward Current
(MA4P282 / MA4P7447 / MADP-007155 Series)
Resistance vs Forward Current
(MA4P789 / MA4P7433/ MADP-007433 Series)
Series Resistance ()
Series Resistance ()
Typical Forward Resistance vs DC Bias Current Curves @ 100 MHz
Forward Bias Current (mA)
Resistance vs Forward Current
(MADP-007448 Series)
Series Resistance ()
Series Resistance ()
Resistance vs Forward Current
(MA4P290 / MADP-007167 Series)
Forward Bias Current (mA)
Forward Bias Current (mA)
Forward Bias Current (mA)
6
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
SMPP Series
Surface Mount Plastic PIN Diodes
Rev. V22
Case Styles
SOT-23
Case Style 287
SOT-23 (Case Style 287)
F
N
A
D
B
M
G
K
L
H
E
C
J
DIM.
INCHES
MIN.
MAX.
MILLIMETERS
MIN.
MAX.
A
B
C
D
E
F
G
H
J
K
L
0.048

0.008

0.040

0.013
0.020
0.003
0.006
0.110
0.119
0.047
0.056
0.037 typical
0.075 typical
0.103

0.024

1.22

0.20

1.00

0.35
0.50
0.08
0.15
2.80
3.00
1.20
1.40
0.95 typical
1.90 typical
2.60

0.60

DIM.
GRADIENT
M
N
10 max.6
2 . . .30
6. Applicable on all sides
SC-70, 3 Lead (Case Style 1146)
A
DIM.
H
E
J
10 M A X .
C
B
G
F
D
A
B
C
D
E
F
G
H
J
INCHES
MIN.
MAX.
MILLIMETERS
MIN.
MAX.
0.071
0.045
0.071
0.047
0.010
0.031
0.000
0.004
0.004
1.80
1.14
1.80
1.19
0.25
0.79
0.00
0.10
0.10
0.087
0.053
0.094
0.057
0.016
0.039
0.004
0.007
0.010
2.21
1.35
2.39
1.45
0.41
1.00
0.10
0.18
0.25
SC-79 (Case Style 1279)
INCHES
MIN.
MAX.
MILLIMETERS
MIN.
MAX.
A
.0197
.0276
0.50
0.70
B
0.003
0.008
0.07
0.20
C
0.006
0.010
0.15
0.25
D
0.010
0.014
0.25
0.35
E
0.059
0.067
1.50
1.70
F
0.043
0.051
1.09
1.30
DIM.
G
.0098 nominal
0.250 nominal
H
.0433 nominal
1.10 nominal
I
.027
.035
0.68
0.89
7
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
SMPP Series
Surface Mount Plastic PIN Diodes
Rev. V22
Case Styles (Cont’d)
SOD-323 (Case Style 1141)
INCHES
C
F
E
D
G
H
B
A
SOT-143
Case Style 1068
P
A
J
B
N
H
L
M
D
K
DIM.
MIN.
MAX.
MIN.
MAX.
A
B
C
D
E
F
G
H



0.010
0.003
0.063
0.045
0.091
0.043
0.004
0.008
0.016
0.006
0.075
0.057
0.106



0.25
0.07
1.6
1.14
2.3
1.1
0.1
0.2
0.41
0.15
1.9
1.45
2.7
SOT-143 (Case Style 1068)
G
E
MILLIMETERS
F
C
DIM.
INCHES
MIN.
MAX.
MILLIMETERS
MIN.
MAX.
A
B
C
D
E
F
G
H
J
K
L
M
0.044

0.004

0.040

0.013
0.020
0.030
0.035
0.003
0.006
0.110
0.119
0.047
0.056
0.075 typical
0.075 typical
0.103

0.024

1.10

0.10

1.00

0.35
0.50
0.75
0.90
0.08
0.15
2.80
3.00
1.20
1.40
1.90 typical
1.90 typical
2.6

0.6

DIM.
GRADIENT
M
N
10 max. 7
2 . . . 30
7. Applicable on all sides
8
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
SMPP Series
Surface Mount Plastic PIN Diodes
Rev. V22
Mounting Information
SOT-23
The illustration indicates the recommended
mounting pad configuration for the SOT-23,
SOT-323 , SOD-323, SOT-143, and SC-79
packages. Solder paste containing flux should be
screened onto the pads to a thickness of 0.0050.007 inches. The plastic package is placed in
position, firmly adhering to the solder paste.
Permanent attachment is performed by a reflow
soldering procedure during which the tab
temperature does not exceed +275 C and the
body temperature does not exceed +250 C, for
standard models and +260 C for the RoHS
compliant devices.
.030 min.
0.80
.090
2.2
.035 min.
0.90
.037
0.95
0.75
1.9
Dimenstions: inches
mm
SOD-323
0.030
0.80
Please refer to Application Note M538 for
surface mounting instructions.
0.030
0.80
0.030
0.80
SOT-323
0.030
0.80
.090
2.2
Dimenstions: inches
mm
0.030
0.80
0.075
1.9
0.030
0.80
SC-79
0.030
0.80
Dimenstions: inches
mm
SOT-143
0.020
0.50
0.020
0.50
0.045
1.17
0.030
0.76
Dimenstions: inches
mm
0.035
0.89
0.115
2.92
0.053
1.35
0.045
1.14
0.045
1.14
0.031
0.79
0.106
2.69
Dimenstions: inches
mm
9
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
SMPP Series
Surface Mount Plastic PIN Diodes
Rev. V22
M/A-COM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
10
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support