SPECIFICATION CONTROL DRAWING Product Revision Product Name B-106-4631 B B-106-4632 B øA min 4.0 (0.155) 4.6 (0.180) Product Dimensions B C L nom nom max 6.35 0.8 32.0 (0.250) (0.030) (1.260) 6.35 0.8 33.0 (0.250) (0.030) (1.300) Color (1) Red Blue Wire Dimensions Size Range øG mm2 (AWG) min max 0.5 - 1.0 1.4 4.0 (AWG 22-18) (0.055) (0.155) 1.5 - 2.5 2.0 4.6 (AWG 16-14) (0.080) (0.180) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent color (1), radiation cross-linked modified polyamide with thermoplastic adhesive coating inside. 2. BLADE TERMINAL: Tin-plated brass. BASE METAL: C260 Brass. PLATING: Tin-plated per ASTM B545, Class A. APPLICATION 1. These controlled crimp devices are designed to terminate a tin-plated or bare copper stranded wire having an insulation rated for at least 75°C to a blade terminal. It will provide a splash proof and strain relief connection. UL listed wire connector 3Z11. 2. Temperature range: -55°C to +125°C. 3. For application tooling and installation, see RPIP-684-00. For best results, prepare the wire as shown: Tyco Electronics Corporation 300 Constitution Drive, Menlo Park, CA. 94025, U.S.A. Raychem Unless otherwise specified dimensions are in millimeters. [Inches dimensions are shown in brackets] TOLERANCES: 0.00 N/A 0.0 N/A 0 N/A ANGLES: N/A ROUGHNESS IN MICRON Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. PREPARED BY: REPLACES: . DCR NUMBER: mforonda D030190 D030372 If this document is printed it becomes uncontrolled. Check the latest revision TITLE: DURASEAL BLADE TERMINAL DOCUMENT NO.: B-106-4XXX PROD. REV.: SEE TABLE CAGE CODE : 06090 DOC. ISSUE: DATE: 8 SCALE: None 8-Jul-03 SIZE: A SHEET: 1 of 1