Surface Mount Aluminum Electrolytic Capacitors FEATURES • CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING • VERY LOW IMPEDANCE (Up to 60% lower than NACZ) • WIDE TEMPERATURE RANGE (-55 +105OC) • REDUCED SIZE (Up to 50% smaller than NACZ) • DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING • MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data CHARACTERISTICS Rated Voltage Range Rated Capactance Range Operating Temperature Range Capacitance Tolerance Maximum Leakage Current after 2 minutes @ 20°C NACK Series See NAZT for New Designs RoHS Compliant 6.3 ~ 100Vdc 3.3 ~ 6,800μF -55°C ~ +105°C ±20%(M) includes all homogeneous materials *See Part for P Number N b System S f Details D il 0.01CV or 3μA, whichever is greater W.V. (Vdc) S.V. (Vdc) C ≤ 1,000μF C = 2,200μF All Case Sizes C = 3,300μF C = 4,700μF C = 6,800μF Z -25°C/Z +20°C Z -40°C/Z +20°C Z -55°C/Z +20°C Maximum Tanδ @ 120Hz/20°C Low Temperature Stability Impedance Ratio @ 120Hz Load Life Test @ 105°C 4 ~ 10mm Dia. 2,000 Hours 8x10.5mm 5,000 (Opt.) 10x10.5mm 5,000 (Opt.) 12.5 ~ 18mm Dia. 5,000 Hours 6.3 8.0 0.26 0.30 0.36 2 3 4 10 13 0.19 0.21 0.25 0.29 2 3 4 16 20 0.16 0.20 0.22 2 3 4 25 32 0.14 0.16 0.18 2 3 3 35 44 0.12 2 3 3 50 63 0.10 2 3 3 63 79 0.08 2 3 3 80 100 0.08 2 3 3 Capacitance Change Within ±30% of initial measured value Tanδ Less than 200% of specified maximum value Leakage Current Less than specified maximum value 100 125 0.07 2 3 3 STANDARD PRODUCT AND CASE SIZE Dφ xL (mm) Cap (μF) Code 3.3 4.7 Working Voltage (Vdc) 25 35 50 4x6.1 4x6.1 4x6.1 5x6.1 4x6.1 5x6.1 6.3x6.1 3R3 4R7 6.3 - 10 - 16 - 10 100 - - 4x6.1 22 220 4x6.1 4x6.1 4x6.1 5x6.1 5x6.1 - 4x6.1 5x6.1 - 5x6.1 6.3x6.1 6.3x1 33 330 47 470 68 680 100 101 150 151 4x6.1 5x6.1 5x6.1 6.3x6.1 - 220 221 6.3x6.1 330 331 390 470 560 680 1000 1500 2200 3300 4700 6800 391 471 561 681 102 152 222 332 472 682 6.3x8 8x6.5 8x10.5 8x10.5 10x10.5 12.5x14 16x17 - 5x6.1 6.3x6.1 6.3x6.1 - 6.3x6.1 6.3x6.1 6.3x8 8x6.5 6.3x8 6.3x8 8x6.5 8x10.5 8x10.5 8x10.5 10x10.5 12.5x14 16x17 18x17 - 5x6.1 6.3x6.1 63 5x6.1 80 5x6.1 6.3x6.1 6.3x8 8x6.5 100 - 6.3x8 8x6.5 8x10.5 8x10.5 8x10.5 8x10.5 10x10.5 6.3x6.1 - 6.3x8 8x6.5 6.3x8 8x6.5 - 8x10.5 10x10.5 12.5x14 8x10.5 12.5x14 12.5x14 6.3x6.1 6.3x6.1 6.3x6.1 6.3x8 8x6.5 8x10.5 6.3x8 6.3x8 8x10.5 8x10.5 8x10.5 10x10.5 12.5x14 16x17 10x10.5 12.5x14 12.5x14 16x17 8x10.5 8x10.5 10x10.5 12.5x14 - 18x17 8x10.5 8x10.5 10x10.5 12.5x14 - 16x17 18x17 8x10.5 10x10.5 12.5x14 16x17 18x17 - 10x10.5 12.5x14 16x17 16x17 18x17 - 12.5x14 12.5x14 16x17 16x17 - 12.5x14 16x17 16x17 16x17 16x17 - 16x17 18x17 - 18x17 - - Available in "Y" Control Option (for Automotive Equipment) NIC COMPONENTS CORP. www.niccomp.com NACK rev. 1 05212007 www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 1 Surface Mount Aluminum Electrolytic Capacitors NACK Series STANDARD VALUES, CASE SIZES AND SPECIFICATIONS NIC Part Number* NACK220M6.3V4x6.1TR13F NACK470M6.3V4x6.1TR13F NACK470M6.3V5x6.1TR13F NACK101M6.3V5x6.1TR13F NACK101M6.3V6.3x6.1TR13F NACK221M6.3V6.3x6.1TR13F NACK331M6.3V6.3x8TR13F NACK331M6.3V8x6.5TR13F NACK471M6.3V8x10.5TR13F NACK471M6.3V8x10.5TR13EF NACK102M6.3V8x10.5TR13F NACK102M6.3V8x10.5TR13EF NACK152M6.3V10x10.5TR13F NACK152M6.3V10x10.5TR13EF NACK332M6.3V12.5x14TR13F NACK682M6.3V16x17TR15F NACK220M10V4x6.1TR13F NACK330M10V4x6.1TR13F NACK330M10V5x6.1TR13F NACK151M10V6.3x6.1TR13F NACK221M10V6.3x8TR13F NACK221M10V8x6.5TR13F NACK331M10V8x10.5TR13F NACK331M10V8x10.5TR13EF NACK471M10V8x10.5TR13F NACK471M10V8x10.5TR13EF NACK681M10V8x10.5TR13F NACK681M10V8x10.5TR13EF NACK102M10V10x10.5TR13F NACK102M10V10x10.5TR13EF NACK222M10V12.5x14TR13F NACK472M10V16x17TR15F NACK682M10V18x17TR13F NACK100M16V4x6.1TR13F NACK220M16V4x6.1TR13F NACK220M16V5x6.1TR13F NACK470M16V5x6.1TR13F NACK470M16V6.3x6.1TR13F NACK680M16V6.3x6.1TR13F NACK101M16V6.3x6.1TR13F NACK151M16V6.3x8TR13F NACK221M16V6.3x8TR13F NACK221M16V8x6.5TR13F NACK331M16V8x10.5TR13F NACK331M16V8x10.5TR13EF NACK471M16V8x10.5TR13F NACK471M16V8x10.5TR13EF NACK681M16V10x10.5TR13F NACK681M16V10x10.5TR13EF NACK152M16V12.5x14TR15F NACK332M16V16x17TR15F NACK472M16V18x17TR13F NACK100M25V4x6.1TR13F NACK220M25V5x6.1TR13F NACK330M25V5x6.1TR13F NACK330M25V6.3x6.1TR13F NACK470M25V6.3x6.1TR13F NACK680M25V6.3x6.1TR13F NACK101M25V6.3x8TR13F Cap. (μF) 22 W.V. (Vdc) 47 100 220 330 470 470 1000 1000 1500 1500 3300 6800 22 6.3 33 150 220 330 330 470 470 680 680 1000 1000 2200 4700 6800 10 10 22 47 68 100 150 220 16 330 330 470 470 680 680 1500 3300 4700 10 22 33 47 68 100 25 Dissipaton Factor Max. Ripple Current (mA) (Tan δ) +105°C/100KHz 0.26 90 0.26 90 0.26 160 0.26 160 0.26 240 0.26 240 0.26 280 0.26 300 0.26 600 0.26 600 0.26 600 0.26 600 0.28 850 0.28 850 0.30 1100 0.36 1800 0.19 90 0.19 90 0.19 160 0.19 240 0.19 160 0.19 300 0.19 600 0.19 600 0.19 600 0.19 600 0.19 600 0.19 600 0.19 850 0.19 850 0.21 1100 0.25 1800 0.29 2060 0.16 90 0.16 90 0.16 160 0.16 160 0.16 240 0.16 240 0.16 240 0.16 280 0.16 280 0.16 300 0.16 600 0.16 600 0.16 600 0.16 600 0.16 850 0.16 850 0.18 1100 0.20 1800 0.22 2060 0.14 90 0.14 160 0.14 160 0.14 240 0.14 240 0.14 240 0.14 280 Available in "Y" Control Option (for Automotive Equipment) 2 NIC COMPONENTS CORP. www.niccomp.com Max. Impedance (Ω) +20°C/100KHz 1.35 1.35 0.70 0.70 0.36 0.36 0.34 0.26 0.16 0.16 0.16 0.16 0.08 0.08 0.06 0.035 1.35 1.35 0.70 0.36 0.34 0.26 0.16 0.16 0.16 0.16 0.16 0.16 0.08 0.08 0.06 0.035 0.033 1.35 1.35 0.70 0.70 0.36 0.36 0.36 0.34 0.34 0.26 0.16 0.16 0.16 0.16 0.08 0.08 0.06 0.035 0.033 1.35 0.70 0.70 0.36 0.36 0.36 0.34 Load Life Hours @ +105°C 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 5,000 2,000 5,000 2,000 5,000 5,000 5,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 5,000 2,000 5,000 2,000 5,000 2,000 5,000 5,000 5,000 5,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 5,000 2,000 5,000 2,000 5,000 5,000 5,000 5,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 *See part numbering system for how to denote WT termination style www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Surface Mount Aluminum Electrolytic Capacitors NACK Series STANDARD VALUES, CASE SIZES AND SPECIFICATIONS Cap. (μF) NACK101M25V8x6.5TR13F 100 NACK151M25V8x10.5TR13F 150 NACK151M25V8x10.5TR13EF 150 NACK221M25V8x10.5TR13F 220 NACK221M25V8x10.5TR13EF 220 NACK331M25V8x10.5TR13F 330 NACK331M25V8x10.5TR13EF 330 NACK471M25V10x10.5TR13F 470 NACK471M25V10x10.5TR13EF 470 NACK102M25V12.5x14TR15F 1000 NACK152M25V16X17TR13F 1500 NACK222M25V16x17TR15F 2200 NACK332M25V18x17TR13F 3300 NACK4R7M35V4x6.1TR13F 4.7 NACK100M35V4x6.1TR13F 10 NACK100M35V5x6.1TR13F NACK220M35V5x6.1TR13F 22 NACK330M35V6.3x1TR13F 33 NACK470M35V6.3x6.1TR13F 47 NACK680M35V6.3x8TR13F 68 NACK101M35V6.3x8TR13F 100 NACK101M35V8x10.5TR13F NACK101M35V8x10.5TR13EF 100 NACK151M35V8x10.5TR13F 150 NACK151M35V8x10.5TR13EF 150 NACK221M35V8x10.5TR13F 220 NACK221M35V8x10.5TR13EF 220 NACK331M35V10x10.5TR13F 330 NACK331M35V10x10.5TR13EF 330 NACK471M35V12.5x14TR15F 470 NACK681M35V12.5x14TR15F 680 NACK102M35V16x17TR15F 1000 NACK152M35V16x17TR15F 1500 NACK4R7M50V4x6.1TR13F 4.7 NACK100M50V5x6.1TR13F 10 NACK100M50V6.3x6.1TR13F NACK220M50V6.3x6.1TR13F 22 NACK330M50V6.3x8TR13F 33 NACK330M50V8x6.5TR13F NACK470M50V6.3x8TR13F 47 NACK470M50V8x6.5TR13F NACK101M50V8x10.5TR13F 100 NACK101M50V8x10.5TR13EF 100 NACK151M50V10x10.5TR13F 150 NACK151M50V10x10.5TR13EF 150 NACK221M50V10x10.5TR13F 220 NACK221M50V10x10.5TR13EF 220 NACK331M50V12.5x14TR15F 330 NACK391M50V12.5X14TR13F 390 NACK471M50V16x17TR15F 470 NACK561M50V16x17TR13F 560 NACK681M50V16x17TR15F 680 NACK102M50V16x17TR15F 1000 NACK4R7M63V5x6.1TR13F 4.7 NACK100M63V6.3x6.1TR13F 10 NACK220M63V6.3x8TR13F 22 NACK220M63V8x6.5TR13F NACK330M63V8x10.5TR13F 33 NACK470M63V8x10.5TR13F 47 NIC Part Number* W.V. (Vdc) 25 35 50 63 Dissipaton Factor (Tan δ) 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.16 0.16 0.18 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.08 0.08 0.08 0.08 0.08 0.08 Available in "Y" Control Option (for Automotive Equipment) NIC COMPONENTS CORP. www.niccomp.com Max. Ripple Current (mA) +105°C/100KHz 300 600 600 600 600 600 600 850 850 1100 1800 1800 1800 90 90 160 160 240 240 280 280 600 600 600 600 600 600 850 850 1100 1100 1800 1800 60 85 165 165 195 195 195 195 350 350 670 670 670 670 900 900 1610 1610 1610 1610 50 80 120 120 250 250 Max. Impedance (Ω) +20°C/100KHz 0.26 0.16 0.16 0.16 0.16 0.16 0.16 0.08 0.08 0.06 0.035 0.035 0.033 1.35 1.35 0.70 0.70 0.36 0.36 0.34 0.34 0.16 0.16 0.16 0.16 0.16 0.16 0.08 0.08 0.06 0.06 0.035 0.035 2.9 1.52 0.88 0.88 0.68 0.68 0.68 0.68 0.34 0.34 0.18 0.18 0.18 0.18 0.12 0.12 0.073 0.073 0.073 0.073 3.0 1.5 1.2 1.2 0.65 0.65 Load Life Hours @ +105°C 2,000 2,000 5,000 2,000 5,000 2,000 5,000 2,000 5,000 5,000 5,000 5,000 5,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 5,000 2,000 5,000 2,000 5,000 2,000 5,000 5,000 5,000 5,000 5,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 5,000 2,000 5,000 2,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 2,000 2,000 2,000 2,000 2,000 2,000 *See part numbering system for how to denote WT termination style www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 3 Surface Mount Aluminum Electrolytic Capacitors NACK Series STANDARD VALUES, CASE SIZES AND SPECIFICATIONS NIC Part Number* NACK680M63V8x10.5TR13F NACK101M63V10x10.5TR13F NACK151M63V12.5x14TR13F NACK221M63V12.5x14TR13F NACK471M63V16x17TR15F NACK681M63V18x17TR13F NACK3R3M80V5x6.1TR13F NACK4R7M80V6.3x6.1TR13F NACK100M80V6.3x8TR13F NACK100M80V8x6.5TR13F NACK220M80V8x10.5TR13F NACK330M80V8x10.5TR13F NACK470M80V10x10.5TR13F NACK680M80V12.5x14TR15F NACK101M80V12.5x14TR15F NACK151M80V12.5x14TR15F NACK331M80V16x17TR15F NACK471M80V18x17TR13F NACK220M100V8x10.5TR13F NACK330M100V10x10.5TR13F NACK470M100V12.5x14TR15F NACK680M100V12.5x14TR15F NACK101M100V16x17TR15F NACK151M100V16x17TR15F NACK221M100V18x17TR13F NACK331M100V18x17TR13F Cap. (μF) 68 100 150 220 470 680 3.3 4.7 W.V. (Vdc) 63 10 22 33 47 68 100 150 330 470 22 33 47 68 100 150 220 330 80 100 Dissipaton Factor (Tan δ) 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 Max. Ripple Current (mA) +105°C/100KHz 250 400 800 800 1410 1690 25 40 60 60 130 130 200 500 500 500 793 917 130 200 500 500 793 793 917 917 Available in "Y" Control Option (for Automotive Equipment) Max. Impedance (Ω) +20°C/100KHz 0.65 0.35 0.16 0.16 0.082 0.08 5.0 3.0 2.4 2.4 1.3 1.3 0.7 0.32 0.32 0.32 0.17 0.153 1.3 0.7 0.32 0.32 0.17 0.17 0.153 0.153 Load Life Hours @ +105°C 2,000 2,000 5,000 5,000 5,000 5,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 5,000 5,000 5,000 5,000 5,000 2,000 2,000 5,000 5,000 5,000 5,000 5,000 5,000 *See part numbering system for how to denote WT termination style RIPPLE CURRENT FREQUENCY CORRECTION FACTOR Frequency Correction Factor 60Hz 120Hz 1KHz 0.7 0.75 0.9 10KHz 100KHz 0.95 1.0 PART NUMBER SYSTEM NACK 101 M 50V 8x10.5 TR 13 WT Y E F RoHS Compliant Opt. 5,000 hour (8x10.5 & 10x10.5) Series Opt. WT = Wide Terminal 13 = 13" (330mm) Reel, 15 = 15" (380mm) Reel Tape & Reel Size in mm Working Voltage Tolerance Code M=20% Capacitance Code in μF, first 2 digits are significant Third digit is no. of zeros, “R” indicates decimal for values under 10μF Optional: Suitable for automotive equipment, sourced to special production and inspection at TS-16949 certified production site PRECAUTIONS Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] 4 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Surface Mount Aluminum Electrolytic Capacitors NACK Series DIMENSIONS (mm) Case Size Dφ ±0.5 4 x 6.1 4.0 5 x 6.1 5.0 6.3 6.1 6.3 6.3 x 8 6.3 8 x 6.5 8.0 8 x 6.5WT 8.0 8 x 10.5 8.0 8 x 10.5WT 8.0 10 x 10.5 10.0 10 x 10.5WT 10.0 12.5 x 14 12.5 12.5 x 14WT 12.5 16 x 17 16.0 16 x 17WT 16.0 18 x 17 18.0 18 x 17WT 18.0 L max. 6.1 6.1 6.1 8.0 6.5 6.8 10.5 10.8 10.5 10.8 14.0 14.3 17.0 17.5 17.0 17.3 A, B 4.3 ± 0.2 5.3 ± 0.2 6.6 ± 0.2 6.6 ± 0.2 8.3 ± 0.2 8.3 ± 0.2 8.3 ± 0.2 8.3 ± 0.2 10.3 ± 0.2 10.3 ± 0.2 13.2 ± 0.6 13.5 ± 0.2 16.7 ± 0.6 17.0 ± 0.2 19.0 ± 0.2 19.0 ± 0.2 H max. 5.5 6.5 7.8 7.8 9.5 9.5 10.0 10.0 12.0 12.0 15.0 15.0 19.0 20.0 21.0 21.0 I ±0.3 1.8 2.2 2.6 2.6 3.4 3.4 3.1 3.4 3.2 3.5 4.5 4.7 5.2 5.5 6.7 6.7 Anti-Vibration Skirt on WT Style 8mm ~ 18mm Dia. P ±0.3 1.0 1.5 1.8 1.8 2.2 2.2 3.1 3.1 4.6 4.6 4.6 4.4 6.9 6.9 6.7 6.7 W 0.65 ± 0.15 0.65 ± 0.15 0.65 ± 0.15 0.65 ± 0.15 0.65 ± 0.15 0.70 ± 0.10 0.90 ± 0.20 1.20 ± 0.20 1.05 ± 0.35 1.20 ± 0.20 1.00 ± 0.40 1.20 ± 0.30 1.50 ± 0.60 1.65 ± 0.45 1.20 ± 0.30 1.40 ± 0.20 K 0.35 ± 0.2 0.35 ± 0.2 0.35 ± 0.2 0.35 ± 0.2 0.35 ± 0.2 0.35 ± 0.2 0.70 +0.2/-0.5 0.70 ± 0.2 0.70 +0.2/-0.5 0.70 ± 0.2 0.70 +0.3/-0.5 0.70 ± 0.3 0.70 +0.3/-0.4 0.70 +0.3/-0.4 0.70 ± 0.3 0.70 ± 0.3 STANDARD + Dφ I I W R 0.70 ± 0.2 0.70 ± 0.2 0.70 ± 0.2 2.2 ± 0.2 3.0 ± 0.2 3.0 ± 0.2 S 5.3 ± 0.2 5.3 ± 0.2 6.9 ± 0.2 7.1 ± 0.2 9.0 ± 0.2 11.0 ± 0.2 WT STYLE - + - I I W K K A A L T 1.7 ± 0.2 1.3 ± 0.2 1.3 ± 0,.2 2.4 ± 0.2 1.9 ± 0.2 1.9 ± 0.2 T R P B H Termination deflection: Standard = ±0.30mm WT = +0.15mm/-0.05mm R S P B RECOMMENDED LAND PATTERN (mm) STANDARD TERMINAL Case Dia. a b c 4x6.1 1.0 2.6 1.8 5x6.1 1.4 3.0 1.8 6.3x6.1 2.1 3.5 1.8 6.3x8 2.1 3.5 1.8 8x6.5 2.2 4.5 1.6 8x10.5 2.8 4.1 2.2 10x10.5 4.5 4.5 2.5 12.5x14 4.3 5.8 2.5 16x17 6.6 6.5 4.0 18x17 6.0 7.5 2.5 STANDARD TERMINATION Solder Pads + c b RECOMMENDED LAND PATTERN (mm) WIDE TERMINAL Case Dia. d e f 8x6.5WT 1.8 4.1 5.0 8x10.5WT 2.7 4.0 4.7 10x10.5 WT 3.9 4.4 4.7 12.5x14WT 3.9 6.0 2.5 16x17WT 4.7 8.4 9.6 18x17WT 4.7 8.4 9.6 NIC COMPONENTS CORP. www.niccomp.com - a b WT STYLE TERMINATION Solder Pads Support Terminals f + e www.lowESR.com d www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE e www.SMTmagnetics.com 5 Surface Mount Aluminum Electrolytic Capacitors NACK Series TR13 330mm (13") REEL TR15 380mm (15") REEL CARRIER TAPE Quantity Per Reel 13" Reel 15" Reel 4 x 6.1 14.0 1,200 pcs 2,000 pcs 5 x 6.1 14.0 800 pcs 1,000 pcs 6.3 x 6.1 18.0 800 pcs 1,000 pcs 6.3 x 8 18.0 500 pcs 900 pcs 8 x 6.5 18.0 800 pcs 1,000 pcs 8 X 10.5 26.0 300 pcs 500 pcs 10 x 10.5 26.0 300 pcs 500 pcs 12.5 x 14 34.0 200 pcs* 250 pcs* 16 x 17 46.0 125 pcs* 200 pcs* 18 x 17 46.0 125 pcs 150 pcs *See specific part number in standard values tables for available reel diameter. Case Size A ±0.5 B ±0.2 C ±0.3 D ±0.1 P ±0.1 T ±0.2 4 x 6.1 4.7 4.7 12.0 5.5 8.0 6.4 5 x 6.1 5.7 5.7 12.0 5.5 12.0 6.4 6.3 x 6.1 7.0 7.0 16.0 7.5 12.0 6.4 6.3 x 8 7.0 7.0 16.0 7.5 12.0 8.3 8 x 6.5 8.7 8.7 16.0 7.5 12.0 6.8 8 x 6.5WT 8 X 10.5 8.7 8.7 24.0 7.5 12.0 11.1 8 x 10.5WT 10 x 10.5 10.7 10.7 24.0 11.5 16.0 11.2 10 x 10.5WT 12.5 x 14 13.2 13.2 32.0 14.2 24.0 14.2 12.5 x 14WT 14.0 14.0 32.0 14.2 24.0 14.2 16 x 17 17.5 17.5 44.0 20.2 28.0 17.5 16 x 17WT 18 x 17 19.5 19.5 44.0 20.2 32.0 17.5 18 x17WT Case Size W ±1.0 TAPING SPECIFICATIONS (mm) 1. Both Leader and Trailer tape: Minimum 40mm (1.57") empty carrier tape pockets. 2. Leader tape: Approximately 20cm of cover tape at leader. 3. Connection: Maximum 3 connections (slices) per reel. CARRIER 4 + 0.1 1.5∅ +0.1/1.5φ+0.1/-0 1.75 + 0.15 1.75 ± C B D - 0.4 + 0.2 + A P Feeding T REEL 2. 0± 50∅ Min. 2 ±0 1 .8 0. 330 or 380mm 13∅ ±0.5 3.0 ± 0.5 5 W 6 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com