GBPC15, 25, 35 and 50 Glass Passivated Single-Phase Bridge Rectifier FEATURES GBPC-W GBPC • UL Recognition file number E54214 • Universal 3-way terminals: snap-on, wire wrap-around, or P.C.B. mounting • Typical IR less than 0.3 µA • High surge current capability • Low thermal resistance • Solder Dip 260 °C, 40 seconds • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC ~ ~ ~ ~ ~ TYPICAL APPLICATIONS General purpose use in ac-to-dc bridge full wave rectification for Power Supply, Home Appliances, Office Equipment, Industrial Automation applications. ~ MAJOR RATINGS AND CHARACTERISTICS IF(AV) 15 A, 25 A, 35 A, 50 A VRRM 50 V to 1000 V IFSM 200 A, 300 A, 400 A, 400 A IR 5 µA VF 1.1 V Tj max. 150 °C MECHANICAL DATA Case: GBPC, GBPC-W Epoxy meets UL 94V-0 flammability rating Terminals: Nickel plated on faston lugs or Silver plated on wire leads, solderable per J-STD-002B and JESD22-B102D. E4 suffix for commercial grade. Suffix letter "W" added to indicate wire leads (e.g. GBPC12005W). Polarity: As marked, positive lead by belevled corner Mounting Torque: 20 inches-lbs. max. MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL GBPC15, 25, 35, 50 005 01 02 04 06 08 10 UNIT Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Maximum DC blocking voltage Maximum average forward rectified output current (see Fig. 1) GBPC15 GBPC25 GBPC35 GBPC50 IF(AV) 15 25 35 50 A Peak forward surge current single sine-wave superimposed on rated load GBPC15 GBPC25 GBPC35 GBPC50 IFSM 200 300 400 400 A Rating (non-repetitive, for t greater than 1 ms and less than 8.3 ms) for fusing GBPC15 GBPC25 GBPC35 GBPC50 I2t 160 375 375 660 A2 sec RMS isolation voltage from case to leads Operating junction storage temperature range www.yfwdiode.com VISO 2500 V TJ, TSTG - 55 to + 150 °C GBPC15, 25, 35 and 50 ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) TEST CONDITIONS PARAMETER GBPC15 GBPC25 GBPC35 GBPC50 SYMBOL GBPC15, 25, 35, 50 005 01 02 04 06 08 10 UNIT IF = 7.5 A IF = 12.5 A IF = 17.5 A IF = 25.0 A VF 1.1 V Maximum reverse DC current at rated DC blocking voltage per diode TA = 25 °C TA = 125 °C IR 5.0 500 µA Typical junction capacitance per diode at 4 V, 1 MHz CJ 300 pF Maximum instantaneous forward drop per diode THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL GBPC15-25 GBPC35-50 Typical thermal resistance (1) GBPC15, 25, 35, 50 005 01 02 04 06 08 10 1.9 1.4 RθJC UNIT °C/W Note: (1) Thermal resistance from junction to case per diode (2) Bolt down on heatsink with silicone thermal compound between bridge and mounting surface for maximum heat transfer with #10 screw ORDERING INFORMATION PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE GBPC1506-E4/51 15.79 51 100 Paper Box GBPC2506-E4/51 15.79 51 100 Paper Box GBPC3506-E4/51 15.79 51 100 Paper Box GBPC5006-E4/51 15.79 51 100 Paper Box GBPC1506W-E4/51 13.8 51 100 Paper Box GBPC2506W-E4/51 13.8 51 100 Paper Box GBPC3506W-E4/51 13.8 51 100 Paper Box GBPC5006W-E4/51 13.8 51 100 Paper Box www.yfwdiode.com GBPC15, 25, 35 and 50 RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 500 Bridges Mounted on 9.5 x 3.5 x 4.6" (22.9 x 8.9 x 11.7 cm) AL. Finned Plate 35 30 Peak Forward Surge Current (A) Average Forward Current (A) 40 5 x 6 x 4.9" AL, Finned Plate 25 20 5 x 4 x 3" AL. Finned Plate 15 6 x 2.2 x 2.2" AL. Finned Plate 10 60 Hz Resistive or Inductive Load 5 Tj = Tj max. 0.5 ms Single Sine-Wave GBPC50 GBPC25 GBPC35 100 GBPC15 1.0 Cycle 0 0 25 75 100 125 150 175 200 Number of Cycles at 60 HZ Figure 1. Maximum Output Rectified Current Figure 4. Maximum Non-Repetitive Peak Forward Surge Current Per Diode 100 GBPC50 RthS-A = 0.5 °C/W 30 60 Hz Resistive or Inductive Load Instantaneous Forward Current (A) 35 GBPC35 RthS-A = 0.5 °C/W 25 20 GBPC25 RthS-A = 1.0 °C/W 15 10 GBPC15 RthS-A = 1.0 °C/W 5 0 10 20 30 40 50 60 70 80 90 10 Tj = 25 °C Pulse Width = 300 µs 1 % Duty Cycle 1 0.1 0.01 0.4 0 100 0.6 0.8 1 1.2 1.4 1.6 Ambient Temperature °C Instantaneous Forward Voltage (V) Figure 2. Maximum Output Rectified Current Figure 5. Typical Instantaneous Forward Characteristics Per Diode 80 70 Instantaneous Reverse Leakage Current (µA) Average Power Dissipation of Bridge (W) 100 10 1 Case Temperature (°C) 40 Average Forward Current (A) 50 Capacitive Load 60 50 Tj = Tj max. 40 Resistive or Inductive Load 30 20 10 Tj = 125 °C 100 Tj = 150 °C 10 1 50 - 400 V 600 - 1000 V Tj = 25 °C 0.1 0.01 0 0 10 20 30 40 0 20 40 60 80 100 Average Output Current (A) Percent of Rated Peak Reverse Voltage (%) Figure 3. Maximum Power Dissipation Figure 6. Typical Reverse Leakage Characteristics Per Diode www.yfwdiode.com GBPC15, 25, 35 and 50 1000 Transient Thermal Impedance (°C/W) Junction Capacitance (pF) 600 Tj = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 100 Tj = 25 °C f = 1.0 MHz V sig = 50 mVp-p 100 10 1 0.01 50 1 10 100 0.1 10 1 100 Reverse Voltage (V) t - Heating Time (s) Figure 7. Typical Junction Capacitance Per Diode Figure 8. Typical Transient Thermal Impedance Per Diode PACKAGE OUTLINE DIMENSIONS in inches (millimeters) GBPC GBPC-W Hole for #10 Screw 0.220 (5.59) DIA. 0.200 (5.08) 1.135 (28.8) 1.115 (28.3) 0.732 (18.6) 0.692 (17.6) 1.135 (28.8) 1.115 (28.3) 0.24 (6.0) 0.18 (4.6) 0.042 (1.07) 0.038 (0.97) DIA. 0.310 (7.62) 0.290 (7.36) www.yfwdiode.com 0.24 (6.0) 0.18 (4.6) 0.732 (18.6) 0.692 (17.6) 0.470 (11.9) 0.430 (10.9) 0.50 (12.7) 0.44 (11.7) Hole for #10 Screw 0.220 (5.59) DIA. 0.200 (5.08) 0.672 (17.1) 0.632 (16.1) AC 0.672 (17.1) 0.632 (16.1) 1.135 (28.8) 1.115 (28.3) 0.582 (14.8) 0.542 (13.8) 0.034 (0.86) 0.030 (0.76) 0.732 (18.6) 0.692 (17.6) 0.094 (2.4) DIA. 1.25 (31.8) MIN. 1.135 (28.8) 1.115 (28.3) 0.034 (0.86) 0.030 (0.76) 0.310 (7.62) 0.290 (7.36) 0.25 (6.35) 0.840 (21.3) 0.740 (18.8)