WTE ER1603FCT 16a glass passivated dual superfast rectifier Datasheet

WTE
POWER SEMICONDUCTORS
ER1600FCT – ER1606FCT
Pb
16A GLASS PASSIVATED DUAL SUPERFAST RECTIFIER
Features
!
Glass Passivated Die Construction
!
!
!
!
!
Super-Fast Switching
Low Forward Voltage Drop
C
Low Reverse Leakage Current
High Surge Current Capability
G
Plastic Material has UL Flammability
Classification 94V-O
D
B
Mechanical Data
!
!
!
!
!
!
!
A
PIN1
2
3
F
Case: ITO-220, Full Molded Plastic
Terminals: Plated Leads Solderable per
MIL-STD-202, Method 208
Polarity: See Diagram
Weight: 2.24 grams (approx.)
Mounting Position: Any
Mounting Torque: 11.5 cm-kg (10 in-lbs) Max.
Lead Free: For RoHS / Lead Free Version,
Add “-LF” Suffix to Part Number, See Page 4
E
P
I
H
L
J
ITO-220
Dim
Min
Max
14.60
15.40
A
9.70
10.30
B
2.55
2.85
C
3.56
4.16
D
13.00
13.80
E
0.30
0.90
F
3.00 Ø
3.50 Ø
G
6.30
6.90
H
4.20
4.80
I
2.50
2.90
J
0.36
0.80
K
2.90
3.30
L
2.29
2.79
P
All Dimensions in mm
PIN 1 -
+
PIN 3 -
PIN 2
K
Maximum Ratings and Electrical Characteristics
@TA=25°C unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Symbol
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
ER
ER
ER
ER
ER
ER
ER
1600FCT 1601FCT 1601AFCT 1602FCT 1603FCT 1604FCT 1606FCT
Unit
VRRM
VRWM
VR
50
100
150
200
300
400
600
V
VR(RMS)
35
70
105
140
210
280
420
V
Average Rectified Output Current
@TC = 105°C
IO
16
A
Non-Repetitive Peak Forward Surge
Current 8.3ms Single half sine-wave
superimposed on rated load (JEDEC Method)
IFSM
125
A
Forward Voltage
VFM
@IF = 8.0A
Peak Reverse Current
@TA = 25°C
At Rated DC Blocking Voltage @TA = 125°C
0.95
1.3
1.7
10
500
IRM
V
µA
Reverse Recovery Time (Note 1)
trr
35
50
nS
Typical Junction Capacitance (Note 2)
Cj
80
60
pF
Operating and Storage Temperature Range
Tj, TSTG
-65 to +150
°C
Note: 1. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A.
2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
ER1600FCT – ER1606FCT
1 of 4
© 2006 Won-Top Electronics
IF, INSTANTANEOUS FORWARD CURRENT (A)
I(AV), AVERAGE FORWARD CURRENT (A)
20
16
12
8
4
0
0
50
100
100
1600 - 1602
1606
1.0
Pulse width = 300µs
2% duty cycle
0.1
0
150
TC, CASE TEMPERATURE (°C)
Fig. 1 Forward Current Derating Curve
0.6
1.2
1.8
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typical Forward Characteristics
400
225
Tj = 25°C
f = 1.0MHz
8.3 ms single half-sine-wave
JEDEC method
Cj, CAPACITANCE (pF)
IFSM, PEAK FORWARD SURGE CURRENT (A)
1603 - 1604
10
150
75
100
ER1600FCT ER1602FCT
ER1603FCT ER1606FCT
10
0
1
0.1
100
10
1.0
10
100
VR, REVERSE VOLTAGE (V)
Fig. 4 Typical Junction Capacitance
NUMBER OF CYCLES AT 60Hz
Fig. 3 Maximum Non-Repetitive Surge Current
trr
+0.5A
50Ω NI (Non-inductive)
10Ω NI
Device
Under
Test
(-)
0A
(+)
Pulse
Generator
(Note 2)
50V DC
Approx
(-)
1.0Ω
NI
Oscilloscope
(Note 1)
-0.25A
(+)
Notes:
1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF.
2. Rise Time = 10ns max. Input Impedance = 50Ω.
-1.0A
Set time base for 5/10ns/cm
Fig. 5 Reverse Recovery Time Characteristic and Test Circuit
ER1600FCT – ER1606FCT
2 of 4
© 2006 Won-Top Electronics
MARKING INFORMATION
WTE
ER160xFCT
WTE
ER160xFCT
x
Polarity
= Manufacturer’s Logo
= Device Number
= 0, 1, 1A, 2, 3, 4 or 6
= As Marked on Body
PACKAGING INFORMATION
BULK
Tube Size
L x W x H (mm)
Quantity
(PCS)
Inner Box Size
L x W x H (mm)
Quantity
(PCS)
Carton Size
L x W x H (mm)
Quantity
(PCS)
Approx. Gross Weight
(KG)
525 x 31 x 6
50
555 x 145 x 95
2,000
572 x 306 x 218
8,000
19.0
Note: 1. Anti-static tube, water clear color.
RECOMMENDED SCREW MOUNTING ARRANGEMENT
The full molded plastic package affords a
major reduction of hardware as compared
to a standard TO-220 package. However,
precautions should be made in mounting
procedure.
6-32 HEX Head Screw
Plain Washer
A conical washer should be used to apply
proper force to the device. Screw should
not be tightened with any type of air-forced
torque or equipment that may cause crack
on device package.
Rectifier
Heatsink
Conical Washer
6-32 HEX Nut
A layer of thermal grease or thermal pad in
the interface will be considerably helpful for
heat dissipation.
ER1600FCT – ER1606FCT
3 of 4
© 2006 Won-Top Electronics
ORDERING INFORMATION
Product No.
Package Type
Shipping Quantity
ER1600FCT
ITO-220
50 Units/Tube
ER1601FCT
ITO-220
50 Units/Tube
ER1601AFCT
ITO-220
50 Units/Tube
ER1602FCT
ITO-220
50 Units/Tube
ER1603FCT
ITO-220
50 Units/Tube
ER1604FCT
ITO-220
50 Units/Tube
ER1606FCT
ITO-220
50 Units/Tube
1.
2.
Shipping quantity given is for minimum packing quantity only. For minimum
order quantity, please consult the Sales Department.
To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix
to part number above. For example, ER1600FCT-LF.
Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any
responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to
manufacturer. WTE reserves the right to change any or all information herein without further notice.
WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life
support devices or systems without the express written approval.
Won-Top Electronics Co., Ltd.
No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan
Phone: 886-7-822-5408 or 886-7-822-5410
Fax: 886-7-822-5417
Email: [email protected]
Internet: http://www.wontop.com
We power your everyday.
ER1600FCT – ER1606FCT
4 of 4
© 2006 Won-Top Electronics
Similar pages