MA-COM M21204 Sd-sdi broadcast video adaptive co-axial cable equalizer Datasheet

Next Generation High Performance Analog
Broadcast Video Solutions
M21204 SD-SDI Broadcast Video
Adaptive Co-Axial Cable Equalizer
The M21204 is a next generation high performance analog
>
K E Y F E AT U R E S
SD-SDI video cable adaptive equalizer that provides > 350m
Belden 1694A cable length performance in a drop in solution
> SMPTE 259M and SMPTE 344M
compliant
> Integrated differential 50 Ω
output terminations
that is pin-to-pin, electrically, and functionally compatible
with existing legacy single channel cable equalizers.
Superior next generation equalization performance of the
M21204 is complemented with a complete serial routing
chipset that includes reclocking (M21205) and cable drivers
(M21202) devices. These new devices further complement
Mindspeed’s unique SD-SDI and HD/SD quad channel
reclocking and asynchronous switching devices:
• M21252 quad channel multi-rate SD-SDI
video reclocker
• M21260 4x4 1.6 Gbps video crosspoint switch
> Adaptive, multi-rate, and auto>
matic co-axial cable equalization
>
> Supports operation from
143 Mbps to 540 Mbps and
DVB-ASI at 270 Mbps
2.5V or 3.3V operation
Reduced power dissipation
- 175mW typical @ 2.5V
- 230mW typical @ 3.3V
> Selectable manual BYPASS mode > Increased operating
temperature range:
> Optimized cable equalization
-10°C to +85°C
for SD and HD data rates
> Pin-to-pin, electrically,
- 350m typical @ SD-SDI with
and functionally compatible
Belden 1694A
with M21214, GS9064
> Output mute at maximum
equalized cable length with
manual override
with quad multi-rate reclockers
• M21261 1:4 1.6 Gbps video fanout with HD/SD
multi-rate reclocking
• M21262 4:1 1.6 Gbps video selector with HD/SD
multi-rate reclocker
Mindspeed’s innovative circuit architecture enables next
generation systems with flexible power supply operation of
2.5V or 3.3V with a 35% power reduction at 2.5V supply rails
and a wider operating temperature range (-10°C to +85°C)
DC restoration to compensate for pathological signal DC
for outdoor applications such as camcorders and edit decks.
content, cable length indication for data rates to 360 Mbps,
and a voltage programmable mute threshold are included
for full compatibility with the GS9064 multi-rate SD-SDI
cable equalizer.
>
M21131V - 72 x 72
M21151V - 144 x 144
Crosspoint
M21205
M21204
SD-SDI
CLOCK & DATA
RECOVERY
W/ BYPASS
Cable
Equalizers
Switches
M21111 - 17 x 17
M21121 - 34 x 34
Other
Mindspeed
Reclockers
M21252
SDO
M21202
SD-SDI
SDO
75 Ohm
Cable
Drivers
SD Routing Switcher Application
M21131V - 72 x 72
M21151V - 144 x 144
Crosspoint
FPGA
10
Deserializers
M21204
SD-SDI
10
Cable
Equalizers
Y
EFFECTS
PROCESSING
C
BLOCK
PCLK
Matrices
M21111 - 17 x 17
M21121 - 34 x 34
Integrated
Mindspeed
SerDes IP
LINE SYNC/GENLOCK
MEMORY MANAGER
10
SDO
M21202
SD-SDI
Serializers
10
SDO
Y
FRAME MEMORY
FRAME SYNC
C
PCLK
75 Ohm
Cable Drivers
SD Production & Master Control Switcher Application
Product Features
Applications
Additional Features
Ordering Information
• Small to large serial routing switchers
• Production and master control switchers
• Fully SMPTE 259, SMPTE 292, and
SMPTE 344 compliant
M21204-15P: SD video cable equalizer
(143 Mbps – 540 Mbps)
• Non linear editors
• Equalizer BYPASS operation
M21204G-15P: SD video cable equalizer
(143 Mbps – 540 Mbps)
[RoHS compliant package]
• Processing and terminating equipment
• Broadcast video to SONET/SDH, Fibre Channel,
or Gigabit Ethernet transport line card/modules
for DWDM or CWDM applications
• Distribution amplifiers,
• Backplane reach extension
www.mindspeed.com/salesoffices
General Information: (949) 579-3000
Headquarters – Newport Beach
4000 MacArthur Blvd., East Tower
Newport Beach, CA 92660-3007
21204-BRF-001-B.PDF
© 2005 Mindspeed Technologies™. All rights reserved. Mindspeed and the Mindspeed
logo are trademarks of Mindspeed Technologies. All other trademarks are the property of their respective owners. Although Mindspeed Technologies strives for accuracy in all its publications, this material may contain errors or omissions and is
subject to change without notice. This material is provided as is and without any
express or implied warranties, including merchantability, fitness for a particular
purpose and non-infringement. Mindspeed Technologies shall not be liable for any
special, indirect, incidental or consequential damages as a result of its use.
Package: 16 pin narrow SOIC
16 pin narrow SOIC
[RoHS compliant package]
Similar pages