MUR1680CT R GLASS PASSIVATED SUPER FAST RECTIFIER Reverse Voltage - 800 Volts Forward Current - 16.0Amperes S E M I C O N D U C T O R FEATURES TO-220AB Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Fast switching for high efficiency Low forward voltage drop Single rectifier construction High surge capability For use in low voltage ,high frequency inverters, JF MUR1680CT free wheeling ,and polarity protection applications High temperature soldering guaranteed:260°C/10 seconds, 0.25"(6.35mm)from case Component in accordance to RoHS 2011/65/EU 0.159(4.05) 0.185(4.70) 0.410(10.41) 0.161(4.10) 0.390(9.91) 0.147(3.74) DIA 0.175(4.44) 0.055(1.39) 0.045(1.14) 0.114(2.90) 0.102(2.60) 0.283(7.20) 0.244(6.20) 1 PIN 2 3 1.161(29.50) 0.114(2.90) 1.106(28.10) 0.138(3.50) 0.560(14.22) 0.053(1.34) 0.516(13.10) 0.047(1.20) 0.037(0.94) MECHANICAL DATA 0.027(0.68) 0.105(2.67) 0.023(0.58) 0.095(2.41) Case: JEDEC TO-220AC molded plastic body 0.014(0.35) 0.208(5.28) Terminals: Lead solderable per MIL-STD-750,method 2026 0.192(4.88) Polarity: As marked Mounting Position: Any Weight: 0.08ounce, 2.24 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Ratings at 25 C ambient temperature unless otherwise specified ,Single phase ,half wave ,resistive or inductive load. For capacitive load,derate by 20%.) Symbols MUR 1680CT VRRM VRMS VDC 800 Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current(see Fig.1) Per leg Total device Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) IF=5A 800 I(AV) 8.0 16.0 Amps IFSM 150.0 150 Amps VF IF=8A Reverse current at rated DC blocking voltage(Note 1) TA=25°C TA=125°C Maximum Reverse Recovery Time (Note 2) Typical thermal resistance Operating junction temperature range IR 560 / TYP. 1.7 MAX. TYP. 1.9 MAX. / TYP. 2.0 MAX. 2.4 TYP. 1 MAX. 5 TYP. 10 MAX. 50 Volts μA Trr 35 ns RθJC 2.5 °C/W TJ -65 to+150 °C °C TSTG Notes: 1. Pulse test: 300μs pulse width,1% duty cycle 2. Reverse recovery test conditions IF=0.5A,IR=1.0A, Irr=0.25A Storage temperature range JINAN JINGHENG ELECTRONICS CO., LTD. Units Volts Volts Volts IF=3A Forward voltage (note 1 ) 0.098(2.50) 2-1 -65 to+150 HTTP://WWW.JINGHENGGROUP.COM RATINGS AND CHARACTERISTIC CURVES MUR1680CT FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT(AMPERES) AVERAGE FORWARD CURRENT AMPERES FIG.1-FORWARD CURRENT DERATING CURVE 24 20 RESISTIVE OR INDUCTVE LOAD 16 12 8 4 0 0 50 100 150 CASE TEMPERATURE (°C) 175 8.3ms Single Half Sine-Wave (JEDEC Method) 150 125 100 75 50 25 0 1 2 5 50 20 FIG.4-TYPICAL REVERSE CHARACTERISTICS 20 50 INSTANTANEOUS REVERSE CURRENT (μA) 10 INSTANTANEOUS FORWARD CURRENT( AMPERES) 10 NUMBER OF CYCLES AT 60Hz FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 PULSE WIDTH=300μS 1% DUTY CYCLE 1 0.1 TJ=125°C 1 TJ=25°C 0.1 0.01 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 0.001 INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE% JINAN JINGHENG ELECTRONICS CO., LTD. 2-2 HTTP://WWW.JINGHENGGROUP.COM 100