Addendum HC908JL3AD/D Rev. 4, 10/2003 Freescale Semiconductor, Inc... Addendum to MC68HC908JL3 Technical Data This addendum provides changes and additional information to: MC68HC908JL3 Technical Data (Freesca;e document number MC68HC908JL3/H Rev. 1.0) NOTE: To provide the most up-to-date information, the revision of our documents on the World Wide Web will be the most current. Your printed copy may be an earlier revision. To verify you have the latest information available, refer to: http://freescale.com Page 43 4.7 FLASH Program Operation — remove the note: “In order to avoid program disturbs, the row must be erased before any byte on that row is programmed.” 48-Pin LQFP MC68H(R)C908JL3 The 48-pin LQFP package is available for the MC68HC908JL3 and MC68HRC908JL3. The pin assignment and mechanical drawing are shown in Figure 1 and Figure 2 respectively. Order Numbers: MC order number MC68HC908JL3CFA MC68HRC908JL3CFA Oscillator type Crystal RC Notes: C = –40 °C to +85 °C FA = Plastic Low Quad Flat Pack (LQFP) © Freescale Semiconductor, Inc., 2004. All rights reserved. FLASH memory Operating Voltage Package 4096 Bytes 5V ±10% 3V ±10% 48-pin LQFP Freescale Semiconductor, Inc. HC908JL3AD/D NC VSS PTA0 IRQ1 RST PTA5 PTD4 PTD5 NC 46 45 44 43 42 41 40 39 38 37 NC NC 36 NC NC 2 35 NC OSC1 3 34 NC OSC2/PTA6 4 33 PTD2 PTA1 5 32 PTA4 NC 6 31 PTD3 30 NC MC68HC908JL3 MC68HRC908JL3 25 NC NC 24 23 NC 13 NC 12 NC NC 22 26 PTB2 11 21 NC PTB3 PTD1 20 27 PTD0 10 19 PTB7 PTB4 PTB1 18 28 PTD6 9 17 PTA3 PTD7 PTB0 16 29 PTB5 8 15 PTA2 PTB6 7 14 VDD NC Freescale Semiconductor, Inc... NC 1 47 48 NC 48-Pin LQFP Pin Assignment NC: No connection Figure 1. 48-Pin LQFP Pin Assignment 2 Addendum to MC68HC908JL3 Technical Data For More Information On This Product, Go to: www.freescale.com Freescale Semiconductor, Inc. HC908JL3AD/D 48-Pin LQFP MC68H(R)C908JL3 48-Pin LQFP Mechanical Specification 4X 0.200 AB T–U Z DETAIL Y A P A1 48 37 36 U B V AE B1 12 25 13 AE V1 24 DIM A A1 B B1 C D E F G H J K L M N P R S S1 V V1 W AA Z S1 T, U, Z S DETAIL Y 4X 0.200 AC T–U Z 0.080 AC G AB AD AC MILLIMETERS MIN MAX 7.000 BSC 3.500 BSC 7.000 BSC 3.500 BSC 1.400 1.600 0.170 0.270 1.350 1.450 0.170 0.230 0.500 BSC 0.050 0.150 0.090 0.200 0.500 0.700 1° 5° 12° REF 0.090 0.160 0.250 BSC 0.150 0.250 9.000 BSC 4.500 BSC 9.000 BSC 4.500 BSC 0.200 REF 1.000 REF M° BASE METAL TOP & BOTTOM N R J 0.250 Freescale Semiconductor, Inc... 1 T C E F D 0.080 M AC T–U Z SECTION AE–AE W H L° K DETAIL AD AA Figure 2. 48-Pin Plastic Low Quad Flat Pack (LQFP) (Case #932) Addendum to MC68HC908JL3 Technical Data For More Information On This Product, Go to: www.freescale.com GAUGE PLANE 9 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DATUM PLANE AB IS LOCATED AT BOTTOM OF LEAD AND IS COINCIDENT WITH THE LEAD WHERE THE LEAD EXITS THE PLASTIC BODY AT THE BOTTOM OF THE PARTING LINE. 4. DATUMS T, U, AND Z TO BE DETERMINED AT DATUM PLANE AB. 5. DIMENSIONS S AND V TO BE DETERMINED AT SEATING PLANE AC. 6. DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION. ALLOWABLE PROTRUSION IS 0.250 PER SIDE. DIMENSIONS A AND B DO INCLUDE MOLD MISMATCH AND ARE DETERMINED AT DATUM PLANE AB. 7. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. DAMBAR PROTRUSION SHALL NOT CAUSE THE D DIMENSION TO EXCEED 0.350. 8. MINIMUM SOLDER PLATE THICKNESS SHALL BE 0.0076. 9. EXACT SHAPE OF EACH CORNER IS OPTIONAL. Freescale Semiconductor, Inc... Freescale Semiconductor, Inc. Home Page: www.freescale.com email: [email protected] USA/Europe or Locations Not Listed: Freescale Semiconductor Technical Information Center, CH370 1300 N. Alma School Road Chandler, Arizona 85224 (800) 521-6274 480-768-2130 [email protected] Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7 81829 Muenchen, Germany +44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) [email protected] Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1-8-1, Shimo-Meguro, Meguro-ku Tokyo 153-0064, Japan 0120 191014 +81 2666 8080 [email protected] Asia/Pacific: Freescale Semiconductor Hong Kong Ltd. Technical Information Center 2 Dai King Street Tai Po Industrial Estate, Tai Po, N.T., Hong Kong +800 2666 8080 [email protected] For Literature Requests Only: Freescale Semiconductor Literature Distribution Center P.O. Box 5405 Denver, Colorado 80217 (800) 441-2447 303-675-2140 Fax: 303-675-2150 LDCForFreescaleSemiconductor @hibbertgroup.com RoHS-compliant and/or Pb- free versions of Freescale products have the functionality and electrical characteristics of their non-RoHS-compliant and/or non-Pb- free counterparts. For further information, see http://www.freescale.com or contact your Freescale sales representative. For information on Freescale.s Environmental Products program, go to http://www.freescale.com/epp. Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. HC908JL3AD/D Rev. 4 10/2003 For More Information On This Product, Go to: www.freescale.com