Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : EB (Large Can Size) Type : V Features ● Endurance ● RoHS : 105 °C 3000 h to 5000 h compliant Specifications Category temperature range –25 °C to +105 °C Rated voltage range 160 V.DC to 450 V.DC Capacitance range 2.2 µF to 100 µF Capacitance tolerance ±20 % (120 Hz/+20 °C) Leakage current I < 0.06 CV +10 (µA) After 2 minutes Dissipation factor (tan d) Please see the attached characteristics list V.DC 160 200 250 350 400 450 Characteristics (Impedance ratio at 120 Hz) at low temperature Z(–25 °C) / Z(+20 °C) 2 2 3 5 6 6 After the life test with DC rated working voltage at +105 °C±2 °C for 5000 hours, the capacitors shall meet the limits specified below. (Size code G13 : 3000 hours, G17 : 4000 hours) Capacitance change Within ±20 % of the initial value Endurance tan d < 200 % of the initial limit DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized Shelf life at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value Resistance to soldering heat tan d Within the initial limit DC leakage current Within the initial limit Frequency correction factor for ripple current Frequency (Hz) Rated Voltage (V.DC) 160 to 250 350 to 450 120 1k 10 k < f < 30 k 30 k < f < 100 k 0.55 0.50 0.85 0.80 0.90 0.90 1.00 1.00 Capacitance (µF) 10 2C EB K W ( ) Reference size (Unit : mm) Rated voltage code Lot number R. Voltage 160 (V.DC) Code 2C + L Pressure Relief Series identification A±0.2 B±0.2 Negative polarity marking (–) – H 0D±0.5 0.3 max. (P) Example : 160 V.DC 10 µF Marking color : BLACK (I) Dimensions (I) Marking 200 250 350 400 450 2D 2E 2V 2G 2W Size code G13 G17 H16 J16 J21 K16 K21 0D L 10.0 10.0 12.5 16.0 16.0 18.0 18.0 13.5±0.5 16.5±0.5 16.5±0.5 16.5±0.5 21.5±0.5 16.5±0.5 21.5±0.5 A,B H 10.3 12.0 10.3 12.0 13.5 15.0 17.0 19.0 17.0 19.0 19.0 21.0 19.0 21.0 max. max. max. max. max. max. max. I W P K 3.5 3.5 4.7 5.5 5.5 6.7 6.7 0.9±0.2 0.9±0.2 0.9±0.2 1.2±0.3 1.2±0.3 1.2±0.3 1.2±0.3 4.6 4.6 4.4 6.7 6.7 6.7 6.7 0.70±0.20 0.70±0.20 0.70±0.30 0.70±0.30 0.70±0.30 0.70±0.30 0.70±0.30 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 °C 5000 h (G13 : 3000 h, G17 : 4000 h) Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 10 160 250 400 13.5 G13 Reflow Taping (4) 250 12.5 16.5 H16 470 0.15 5000 EEVEB2C330SQ (4) 150 16 16.5 J16 600 0.15 5000 EEVEB2C470SM (4) 125 16 21.5 J21 750 0.15 5000 EEVEB2C680M (4) 75 18 16.5 K16 750 0.15 5000 EEVEB2C680SM (4) 125 100 18 21.5 K21 1060 0.15 5000 EEVEB2C101M (4) 75 10 10 16.5 G17 80 0.15 4000 EEVEB2D100Q (4) 200 22 12.5 16.5 H16 470 0.15 5000 EEVEB2D220SQ (4) 150 33 16 16.5 J16 600 0.15 5000 EEVEB2D330SM (4) 125 47 18 16.5 K16 600 0.15 5000 EEVEB2D470SM (4) 125 68 16 21.5 J21 750 0.15 5000 EEVEB2D680M (4) 75 100 18 21.5 K21 1060 0.15 5000 EEVEB2D101M (4) 75 10 10 16.5 G17 88 0.15 4000 EEVEB2E100Q (4) 200 22 16 16.5 J16 560 0.15 5000 EEVEB2E220SM (4) 125 33 18 16.5 K16 560 0.15 5000 EEVEB2E330SM (4) 125 47 16 21.5 J21 710 0.15 5000 EEVEB2E470M (4) 75 18 21.5 K21 990 0.15 5000 EEVEB2E680M (4) 75 3.3 10 13.5 G13 38 0.20 3000 EEVEB2V3R3Q (4) 250 4.7 10 16.5 G17 50 0.20 4000 EEVEB2V4R7Q (4) 200 10 16 16.5 J16 270 0.20 5000 EEVEB2V100SM (4) 125 22 18 16.5 K16 350 0.20 5000 EEVEB2V220SM (4) 125 33 16 21.5 J21 480 0.20 5000 EEVEB2V330M (4) 75 47 18 21.5 K21 670 0.20 5000 EEVEB2V470M (4) 75 3.3 10 13.5 G13 40 0.24 3000 EEVEB2G3R3Q (4) 250 4.7 10 16.5 G17 50 0.24 4000 EEVEB2G4R7Q (4) 200 10 16 16.5 J16 250 0.24 5000 EEVEB2G100SM (4) 125 22 16 21.5 J21 410 0.24 5000 EEVEB2G220M (4) 75 18 21.5 K21 600 0.24 5000 EEVEB2G330M (4) 75 2.2 10 13.5 G13 29 0.24 3000 EEVEB2W2R2Q (4) 250 3.3 10 16.5 G17 41 0.24 4000 EEVEB2W3R3Q (4) 200 33 450 Size code 47 68 350 10 L Min. Packaging Q'ty 33 68 200 0D Specification Ripple tan d current Part No. Endurance (100 kHz) (120 Hz) (hours) (+105 °C) (+20 °C) (mA r.m.s.) 70 0.15 3000 EEVEB2C100Q 12.5 16.5 H16 49 0.24 5000 EEVEB2W4R7SQ (4) 150 10 18 16.5 K16 310 0.24 5000 EEVEB2W100SM (4) 125 22 18 21.5 K21 560 0.24 5000 EEVEB2W220M (4) 75 4.7 · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “Q or M” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016