Red Lion EB-5ES-PSE-1 5 port power over ethernet industrial switch Datasheet

EB-5ES-PSE Industrial PoE Switch
Sixnet Networking Series
5 Port Power Over Ethernet Industrial Switch
The EB-5ES-PSE combines the ultra-reliability of a 5 port
Sixnet industrial Ethernet switch with four industrial PoE
sourcing outputs.
Simply power this switch with 48 VDC to source the PoE lines. The four PoE ports
automatically sense and support both PoE and non-PoE (traditional) Ethernet devices. Or
power this switch with 10-30 VDC and it functions as a robust 5 port industrial switch that
is PoE future-ready.
APPLICATIONS
PRODUCT HIGHLIGHTS
>> Video and security
>> Four fully IEEE-compliant PoE ports
>> Industrial automation and control
>> Slim packaging fits on your DIN rail
>> Process xxxxx and motion control
>> Plug and play saves you time and money
>> Truly industrial rated for any application
FEATURES & BENEFITS
>> IEE 802.3af compliant PoE ports
•
•
•
•
Power Sourcing Equipment (PSE) operation
Auto-detection of PD (powered devices)
Over-temperature and over-current detection
Over and under-voltage detection
>> Trouble free operation
•
•
•
•
>> Real-time network operation
• Intelligent message routing - No collisions!
• Supports all standard IEEE 802.3 protocols
>> True plug-and-play simplicity
• Auto-sensing for speed and duplex
• Auto-mdi/mdix-crossover and auto-polarity
• Automatic PoE power management
Truly industrial -40 to 75°C operation
Dual power inputs with surge protection
DIN rail or direct panel mounting
UL / CSA (CUL), CE, hazardous locations
and Maritime rated
>> Networking features
•
•
•
•
Store and forward wire speed switching
Automatic address learning, aging and migration
Full-Duplex operation with flow control
Auto crossover (MDI/MDIX) and auto polarity
compliant
5 Port Power Over Ethernet Industrial Switch Specifications
SWITCH FEATURES
Ethernet switch ports 5 total with 4 PoE (PSE)
Unmanaged, store and forward, wire speed
Ethernet protocols supported all IEEE 802.3
RJ45 ports (shielded) 10/100BaseTX
RJ45 speed (10 or 100 Mbps) auto-negotiation
RJ45 MDI/MDIX auto-crossover and TD/RD auto-polarity
Ethernet isolation 1500 VRMS 1 minute
Fiber optic port speed / 100BaseF (100 Mbps) full duplex
Fiber optic port wavelength 1300 nm (others available)
Fiber multimode (mm) typical 50 or 62.5/125 um (SC or ST)
Fiber singlemode (sm) typical 9 or 10/125 um (SC or ST)
Fiber max. distance (full duplex) 4 km (mm), 20 (sm)
or 40 km (long haul) or more
Typical latency for 100 Mbps ports 5 us + frame time;
varies on load
MAC addresses and bandwidth 1024 and 3.2 Gbps
POWER INPUT AND POE OUTPUT
Power input with reverse polarity protection; 10-30 VDC
with no PoE output; 45-56 VDC for PoE output
Switch power consumption (typ.all ports active at 100 Mbps):
2.0 W (5-port without fiber) + PoE; 3.0 W
(5-port with 1 fiber) + PoE
PoE power consumption up to 15.4 W per port
RJ45 pin assignments for PoE: TX/V- (3, 6); RX/V+ (1, 2)
Power input transient protection 15,000 watts peak
Power input spike Protection 5,000 watts (10 times for 10 uS)
PoE operation - auto power management
PoE disconnect mode - DC disconnect
PoE auto-detection per IEEE 802.3af
PoE protection - over-temperature, over-current,
over/under-voltage and transient
MECHANICAL
DIN rail or direct panel mounting
Lexan case with IP30 protection
Dimensions - see mechanical diagram
Weight (approximate) 0.17 Kg (6 oz)
All specifications are subject to change. Consult factory for latest info.
ORDERING GUIDE
PART NUMBER
DESCRIPTION
EB-5ES-PSE-1
5 RJ45 10/100 Ethernet ports including 4 PoE (PSE) ports
EB-5ES-PSE-2SC
4 RJ45 PoE (PSE) ports and 1 multimode
EB-5ES-PSE-2ST
(Special Order)
Fiber port with SC or ST style connector for up to 4 km
EB-5ES-PSE-3SC
4 RJ45 PoE (PSE) ports and 1 singlemode
EB-5ES-PSE-3ST
(Special Order)
Fiber port with SC or ST style connector for up to 20 km
EB-PD-24V-1
PoE splitter for non PoE devices
EB-PS-AC48-75
AC to 48 VDC, 75W power supply
Contact Red Lion for special or long haul fiber transceivers up to 120 km.
DIMENSIONS
ETHERNET COMPLIANCE
IEEE 802.3af (Power over Ethernet)
IEEE 802.3 (10Mbps Ethernet for legacy devices)
IEEE 802.3u (100Mbps Ethernet for newer devices)
IEEE 802.3x (Full-Duplex with Flow Control)
ENVIRONMENTAL
Operating temperature range -40 to +75 °C
(cold startup @ -40)
Storage temperature range -40 to +85 °C
Humidity (non-condensing) 5 to 95% RH
Vibration, shock and freefall IEC60068-2-6, -27 & -32
STANDARDS COMPLIANCE
Electrical safety - UL508 / CSA C22.2/14; EN61010-1, CE
EMI emissions - FCC part 15, ICES-003; EN61000-6-4, CE
EMC immunity - EN61000-6-2, CE
Hazardous locations: UL1604/CSA C22.2/213 (Class I, Div. 2);
EN60079-15 (Zone 2, Category 3), CE (ATEX)
Marine and offshore rated per ABS
Eye safety (fiber models) IEC60825-1, Class 1; FDA 21
CFR1040.10 and 1040.11
Americas
[email protected]
w w w. re d l i o n . n e t
Europe
Middle East
Africa
[email protected]
As the global experts in communication, monitoring and control for
industrial automation and networking, Red Lion has been delivering
innovative solutions for over forty years. Our award-winning
technology enables companies worldwide to gain real-time data
visibility that drives productivity. Product brands include Red Lion,
N-Tron and Sixnet. With headquarters in York, Pennsylvania, the
company has offices across the Americas, Asia-Pacific and Europe.
For more information, please visit www.redlion.net. Red Lion is a
Spectris company.
Connect. Monitor. Control.
+1 (717) 767-6511
ADLD0152 062614 © 2014 Red Lion Controls
Asia-Pacific
[email protected]
Similar pages