Continental Device India Limited An ISO/TS 16949, ISO 9001 and ISO 14001 Certified Company MPSA55/ MPSA56 PNP SILICON PLANAR EPITAXIAL TRANSISTORS TO-92 Plastic Package E BC General Purpose Amplifier Transistors ABSOLUTE MAXIMUM RATINGS (Ta=25ºC) DESCRIPTION Collector Emitter Voltage Collector Base Voltage Emitter Base Voltage Collector Current Continuous Power Dissipation at Ta=25ºC Derate Above 25ºC Power Dissipation at Tc=25ºC Derate Above 25ºC Operating And Storage Junction Temperature Range THERMAL RESISTANCE Junction to Case Junction to Ambient in free air SYMBOL VCEO VCBO VEBO IC PD MPSA55 60 60 MPSA56 80 80 4.0 500 625 UNITS V V V mA mW 5.0 1.5 mW/ºC W 12 mW/ºC Tj, Tstg -55 to +150 ºC Rth (j-c) *Rth (j-a) 83.3 200 ºC/W ºC/W PD *Rth (j-a) is measured with the device soldered into a typical printed circuit board ELECTRICAL CHARACTERISTICS (Ta=25ºC unless specified otherwise) DESCRIPTION Collector Emitter Voltage Emitter Base Voltage Collector Cut Off Current Collector Cut Off Current DC Current Gain Collector Emitter Saturation Voltage Base Emitter On Voltage Current Gain Bandwidth Product SYMBOL VCEO VEBO ICEO ICBO hFE VCE (sat) VBE (on) **fT TEST CONDITION MPSA55 MPSA56 IC=1mA, IB=0 >80 >60 IE=100µA, IC=0 >4.0 VCE=60V, IB=0 <100 VCB=60V, IE=0 <100 VCB=80V, IE=0 <100 IC=10mA, VCE=1V >100 IC=100mA, VCE=1V >100 IC=100mA, IB=10mA <0.25 IC=100mA, VCE=1V <1.2 IC=100mA, VCE=1V, f=100MHz >50 UNITS V V nA nA nA V V MHz **fT is defined as the frequency at which IhfeI extrapolates to unity MPSA55_56Rev_1 240506E Continental Device India Limited Data Sheet Page 1 of 4 MPSA55/ MPSA56 TO-92 Plastic Package TO-92 Plastic Package A Uncontrolled DIM A B C D K 2 D 3 E Beyond 'L' Solderability Ensured 1 D SEC AA A A MIN. 4.32 4.45 3.18 0.41 0.35 MAX. 5.33 5.20 4.19 0.55 0.50 E F 5 DEG G 1.14 1.40 H 1.20 1.40 K 12.70 — L 1.982 2.082 M 1.20 1.03 All dimensions are in mm L Dimension With 'L' B G F C 3 2 1 H M F Mold Parting Line PIN CONFIGURATION 1. COLLECTOR 2. BASE 3. EMITTER 3 2 1 The TO-92 Package, Tape and Ammo Pack Drawings are correct as on the date of issue/revision of this Data Sheet. The currently valid dimensions and information, may please be confirmed from the TO-92 Drawing in the Packages and Packing Section of the Product Catalogue. Packing Details PACKAGE STANDARD PACK INNER CARTON BOX OUTER CARTON BOX Details Net Weight/Qty Size Qty Size Qty Gr Wt TO-92 Bulk 1K/polybag 200 gm/1K pcs 3" x 7.5" x 7.5" 5K 17" x 15" x 13.5" 80K 23 kgs TO-92 T&A 2K/ammo box 645 gm/2K pcs 12.5" x 8" x 1.8" 2K 17" x 15" x 13.5" 32K 12.5 kgs MPSA55_56Rev_1 240506E Continental Device India Limited Data Sheet Page 2 of 4 MPSA55/ MPSA56 TO-92 Plastic Package Component Disposal Instructions 1. CDIL Semiconductor Devices are RoHS compliant, customers are requested to please dispose as per prevailing Environmental Legislation of their Country. 2. In Europe, please dispose as per EU Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). MPSA55_56Rev_1 240506E Continental Device India Limited Data Sheet Page 3 of 4 Customer Notes MPSA55/ MPSA56 TO-92 Plastic Package Disclaimer The product information and the selection guides facilitate selection of the CDIL's Semiconductor Device(s) best suited for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as to confirm that the Device(s) meet functionality parameters for your application. The information furnished in the Data Sheet and on the CDIL Web Site/CD are believed to be accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product; neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life saving/support appliances or systems. CDIL customers selling these products (either as individual Semiconductor Devices or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s). CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice. CDIL is a registered Trademark of Continental Device India Limited C-120 Naraina Industrial Area, New Delhi 110 028, India. Telephone + 91-11-2579 6150, 4141 1112 Fax + 91-11-2579 5290, 4141 1119 [email protected] www.cdilsemi.com MPSA55_56Rev_1 240506E Continental Device India Limited Data Sheet Page 4 of 4