FM4933 THRU FM4937 50V-600V SURFACE MOUNT GLASS PASSIVATED FAST SWITCHING RECTIFIERS FEATURES 1.0A SOD-123FL Ldeal for surface mounted applications Low leakage current Glass passivated chips Fast switching High temperature soldering guaranteed 250oC/10 seconds/.375 , (9.5mm) lead lengths Mechanical Data Case Molded plastic use UL94V-0 recoqnized flame retardant epoxy Terminals Plated terminals, solderable per MIL-STD-202, Method208 Polarity Red Color band on body denotes cathode Mounting position Any Weight 0.036gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load For capacitive load, derate current by 20% SYMBOL FM4933 FM4934 FM4935 FM4936 FM4937 UNITS Maximum Current Peak Reverse Voltage VRRM 50 100 200 400 600 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 Volts 0 Maximum Average Forward Rectified Current TT=55 C I(AV) 1.0 Amps Peak Forward Surge Current Single Sine-Wave on Rated Load (JEDEC Method) IFSM 30 Amps Maximum Instantaneous Forward Voltage Drop at 1.0A DC VF 1.3 Volts Maximum DC Reverse Current @TA=25 C 0 at Rated DC Blocking Voltage TA=125 C IR 5 100 A Maximum Reverse Recovery Time, Time, Test Conditions IF = 0.5A, IR = 1.0A, IRR = 0.25A TRR Typical Junction Capacitance CJ 15 TJ TSTG -55 to +150 0 Operating Junction and Storage Temperature Range E-mail: [email protected] 1 of 2 150 250 nS pF 0 C Web Site: www.taychipst.com FM4933 THRU FM4937 SURFACE MOUNT GLASS PASSIVATED FAST SWITCHING RECTIFIERS RATINGS AND CHARACTERISTIC CURVES FIG. 1 - DERATING CURVE FOR OUTPUT RECTIFIER CURRENT 50V-600V 1.0A FM4933 THRU FM4937 FIG. 2 - MAXIMUM NON – REPETITIVE PEAK FORWARD SURGE FIG. 3 - TYPICAL REVERSE CHARACTERISTICS FIG. 4 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 5 -TYPICAL JUNCTION CAPACITANCE E-mail: [email protected] 2 of 2 Web Site: www.taychipst.com