NVMFS5832NL Power MOSFET 40 V, 4.2 mW, 120 A, Single N−Channel Features • • • • • Small Footprint (5x6 mm) for Compact Design Low RDS(on) to Minimize Conduction Losses Low QG and Capacitance to Minimize Driver Losses AEC−Q101 Qualified and PPAP Capable These are Pb−Free Devices http://onsemi.com V(BR)DSS MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) Symbol Parameter Value Unit VDSS 40 V Gate−to−Source Voltage VGS ± 20 V ID 120 A Power Dissipation RYJ−mb (Notes 1, 2, 3) Continuous Drain Current RqJA (Notes 1, 3, 4) Power Dissipation RqJA (Notes 1 & 3) Pulsed Drain Current Tmb = 25°C Steady State Tmb = 100°C Tmb = 25°C Steady State PD ID Operating Junction and Storage Temperature Source Current (Body Diode) Single Pulse Drain−to−Source Avalanche Energy (TJ = 25°C, VGS = 10 V, IL(pk) = 52 A, L = 0.1 mH, RG = 25 W) Lead Temperature for Soldering Purposes (1/8″ from case for 10 s) PD Junction−to−Ambient − Steady State (Note 3) 1.9 IDM 557 A TJ, Tstg −55 to + 175 °C IS 120 A EAS 134 mJ TL 260 °C March, 2013 − Rev. 2 MARKING DIAGRAM D 1 SO−8 FLAT LEAD CASE 488AA STYLE 1 A Y W ZZ S S S G D V5832L AYWZZ D D = Assembly Location = Year = Work Week = Lot Traceability ORDERING INFORMATION Symbol Value Unit RYJ−mb 1.2 °C/W RqJA 40 1. The entire application environment impacts the thermal resistance values shown, they are not constants and are only valid for the particular conditions noted. 2. Psi (Y) is used as required per JESD51−12 for packages in which substantially less than 100% of the heat flows to single case surface. 3. Surface−mounted on FR4 board using a 650 mm2, 2 oz. Cu pad. 4. Maximum current for pulses as long as 1 second is higher but is dependent on pulse duration and duty cycle. © Semiconductor Components Industries, LLC, 2013 S (1,2,3) N−CHANNEL MOSFET W 3.7 THERMAL RESISTANCE MAXIMUM RATINGS Junction−to−Mounting Board (top) − Steady State (Notes 2, 3) G (4) A 21 Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Parameter D (5,6) 15 TA = 100°C TA = 25°C, tp = 10 ms W 127 64 TA = 100°C TA = 25°C 120 A 6.5 mW @ 4.5 V 84 Tmb = 100°C TA = 25°C ID MAX 4.2 mW @ 10 V 40 V Drain−to−Source Voltage Continuous Drain Current RYJ−mb (Notes 1, 2, 3, 4) RDS(ON) MAX 1 Package Shipping† NVMFS5832NLT1G SO−8FL (Pb−Free) 1500 / Tape & Reel NVMFS5832NLT3G SO−8FL (Pb−Free) 5000 / Tape & Reel Device †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Publication Order Number: NVMFS5832NL/D NVMFS5832NL ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified) Parameter Symbol Test Condition Min Drain−to−Source Breakdown Voltage V(BR)DSS VGS = 0 V, ID = 250 mA 40 Drain−to−Source Breakdown Voltage Temperature Coefficient V(BR)DSS/ TJ Typ Max Unit OFF CHARACTERISTICS Zero Gate Voltage Drain Current IDSS Gate−to−Source Leakage Current V 34.2 VGS = 0 V, VDS = 40 V mV/°C TJ = 25 °C 1 TJ = 125°C 100 IGSS VDS = 0 V, VGS = ±20 V VGS(TH) VGS = VDS, ID = 250 mA ±100 mA nA ON CHARACTERISTICS (Note 5) Gate Threshold Voltage Negative Threshold Temperature Coefficient VGS(TH)/TJ Drain−to−Source On Resistance Forward Transconductance RDS(on) 1.4 2.4 6.4 VGS = 10 V ID = 20 A 3.1 4.2 VGS = 4.5 V ID = 20 A 5.0 6.5 gFS VDS = 15 V, ID = 20 A V mV/°C 21 mW S CHARGES, CAPACITANCES & GATE RESISTANCE Input Capacitance CISS Output Capacitance COSS Reverse Transfer Capacitance CRSS 2700 VGS = 0 V, f = 1 MHz, VDS = 25 V 360 pF 250 Total Gate Charge QG(TOT) VGS = 4.5 V, VDS = 20 V; ID = 20 A 25 Total Gate Charge QG(TOT) VGS = 10 V, VDS = 20 V; ID = 20 A 51 Threshold Gate Charge QG(TH) Gate−to−Source Charge QGS Gate−to−Drain Charge QGD Plateau Voltage VGP 3.2 td(ON) 13 2.0 VGS = 4.5 V, VDS = 20 V; ID = 20 A nC 8.0 12.7 V SWITCHING CHARACTERISTICS (Note 6) Turn−On Delay Time Rise Time Turn−Off Delay Time Fall Time tr td(OFF) VGS = 4.5 V, VDS = 20 V, ID = 10 A, RG = 1.0 W tf 24 ns 27 8.0 DRAIN−SOURCE DIODE CHARACTERISTICS Forward Diode Voltage Reverse Recovery Time VSD TJ = 25°C 0.73 TJ = 125°C 0.57 tRR Charge Time ta Discharge Time tb Reverse Recovery Charge VGS = 0 V, IS = 5 A 1.2 V 28.6 VGS = 0 V, dIS/dt = 100 A/ms, IS = 10 A QRR 14 14.5 23.4 5. Pulse Test: pulse width v 300 ms, duty cycle v 2%. 6. Switching characteristics are independent of operating junction temperatures. http://onsemi.com 2 ns nC NVMFS5832NL TYPICAL CHARACTERISTICS ID, DRAIN CURRENT (A) TJ = 25°C 5.0 V VDS ≥ 10 V 200 ID, DRAIN CURRENT (A) 10 V 200 4.5 V 150 4.0 V 100 3.5 V 50 150 100 TJ = 25°C 50 TJ = 125°C 3.0 V 0 1 2 3 4 5 2 3 4 5 Figure 1. On−Region Characteristics Figure 2. Transfer Characteristics 0.015 0.010 0.005 1 3 2 5 4 6 7 9 8 VGS, GATE−TO−SOURCE VOLTAGE (V) RDS(on), DRAIN−TO−SOURCE RESISTANCE (W) VGS, GATE−TO−SOURCE VOLTAGE (V) ID = 20 A TJ = 25°C 10 0.007 TJ = 25°C 0.006 VGS = 4.5 V 0.005 0.004 VGS = 10 V 0.003 0.002 10 20 30 40 50 60 70 80 90 100 110 ID, DRAIN CURRENT (A) Figure 3. On−Resistance vs. Gate−to−Source Voltage Figure 4. On−Resistance vs. Drain Current and Gate Voltage 100000 2.2 2.0 TJ = −55°C VDS, DRAIN−TO−SOURCE VOLTAGE (V) 0.020 0.000 0 0 VGS = 0 V VGS = 10 V ID = 20 A 1.8 IDSS, LEAKAGE (nA) RDS(on), DRAIN−TO−SOURCE RESISTANCE (NORMALIZED) RDS(on), DRAIN−TO−SOURCE RESISTANCE (W) 0 1.6 1.4 1.2 1.0 TJ = 150°C 10000 TJ = 125°C 1000 0.8 0.6 −50 −25 0 25 50 75 100 125 150 175 100 10 20 30 TJ, JUNCTION TEMPERATURE (°C) VDS, DRAIN−TO−SOURCE VOLTAGE (V) Figure 5. On−Resistance Variation with Temperature Figure 6. Drain−to−Source Leakage Current vs. Voltage http://onsemi.com 3 40 NVMFS5832NL TYPICAL CHARACTERISTICS C, CAPACITANCE (pF) 3500 Ciss 3000 2500 2000 1500 1000 Coss 500 0 Crss 0 10 20 30 VGS, GATE−TO−SOURCE VOLTAGE (V) VGS = 0 V TJ = 25°C 40 VDS 70 VGS 60 6 50 Qgs 4 40 Qgd 30 20 2 ID = 20 A TJ = 25°C 0 0 10 20 30 40 50 10 0 60 Qg, TOTAL GATE CHARGE (nC) Figure 7. Capacitance Variation Figure 8. Gate−to−Source Voltage vs. Total Charge 100 1000 IS, SOURCE CURRENT (A) VDD = 20 V ID = 20 A VGS = 4.5 V 100 td(off) td(on) tr 10 tf 1 10 100 80 VGS = 0 V TJ = 25°C 60 40 20 0 0.5 0.6 0.7 0.8 0.9 RG, GATE RESISTANCE (W) VSD, SOURCE−TO−DRAIN VOLTAGE (V) Figure 9. Resistive Switching Time Variation vs. Gate Resistance Figure 10. Diode Forward Voltage vs. Current 1000 ID, DRAIN CURRENT (A) t, TIME (ns) 80 8 VDS, DRAIN−TO−SOURCE VOLTAGE (V) 1 90 QT VDS, DRAIN−TO−SOURCE VOLTAGE (V) 10 4000 100 10 ms 100 ms 10 1 ms 0.1 0.01 10 ms VGS = 10 V Single Pulse TC = 25°C 1 RDS(on) Limit Thermal Limit Package Limit 0.1 dc 1 10 VDS, DRAIN−TO−SOURCE VOLTAGE (V) Figure 11. Maximum Rated Forward Biased Safe Operating Area http://onsemi.com 4 100 1.0 NVMFS5832NL TYPICAL CHARACTERISTICS RqJA(t) (°C/W) EFFECTIVE TRANSIENT THERMAL RESISTANCE 100 Duty Cycle = 0.5 10 0.2 0.1 1 0.05 0.02 0.01 0.1 0.01 0.000001 Single Pulse 0.00001 0.0001 0.001 0.01 0.1 PULSE TIME (sec) Figure 12. Thermal Response http://onsemi.com 5 1 10 100 1000 NVMFS5832NL PACKAGE DIMENSIONS DFN5 5x6, 1.27P (SO−8FL) CASE 488AA ISSUE H 2X NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION D1 AND E1 DO NOT INCLUDE MOLD FLASH PROTRUSIONS OR GATE BURRS. 0.20 C D 2 A B D1 2X 0.20 C 4X E1 2 1 2 3 DIM A A1 b c D D1 D2 E E1 E2 e G K L L1 M q q E c A1 4 TOP VIEW C 3X e 0.10 C SEATING PLANE DETAIL A A STYLE 1: PIN 1. SOURCE 2. SOURCE 3. SOURCE 4. GATE 5. DRAIN 0.10 C SIDE VIEW SOLDERING FOOTPRINT* DETAIL A 3X 8X 0.10 C A B 0.05 c 4X e/2 1 0.965 4 K G 0.750 1.000 L PIN 5 (EXPOSED PAD) 4X 1.270 b MILLIMETERS MIN NOM MAX 0.90 1.00 1.10 0.00 −−− 0.05 0.33 0.41 0.51 0.23 0.28 0.33 5.15 BSC 4.70 4.90 5.10 3.80 4.00 4.20 6.15 BSC 5.70 5.90 6.10 3.45 3.65 3.85 1.27 BSC 0.51 0.61 0.71 1.20 1.35 1.50 0.51 0.61 0.71 0.05 0.17 0.20 3.00 3.40 3.80 0_ −−− 12 _ 1.330 2X 0.905 2X E2 L1 M 0.495 4.530 3.200 0.475 D2 2X 1.530 BOTTOM VIEW 4.560 *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 http://onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NVMFS5832NL/D