Renesas M30880FHUGP Single-chip 16/32-bit cmos microcomputer Datasheet

M32C/88 Group (M32C/88T)
SINGLE-CHIP 16/32-BIT CMOS MICROCOMPUTER
REJ03B0171-0110
Rev.1.10
Oct. 31, 2005
1. Overview
The M32C/88 Group (M32C/88T) microcomputer is a single-chip control unit that utilizes high-performance
silicon gate CMOS technology with the M32C/80 Series CPU core. The M32C/88 Group (M32C/88T) is
available in 144-pin and 100-pin plastic molded LQFP packages.
With a 16-Mbyte address space, this microcomputer combines advanced instruction manipulation capabilities to process complex instructions by less bytes and execute instructions at higher speed.
It includes a multiplier and DMAC adequate for office automation, communication devices and industrial
equipments, and other high-speed processing applications.
1.1 Applications
Automobiles, audio, cameras, office equipment, communications equipment, portable equipment, etc.
Rev. 1.10 Oct. 31, 2005
REJ03B0171-0110
Page 1
of 57
1. Overview
M32C/88 Group (M32C/88T)
1.2 Performance Overview
Tables 1.1 and 1.2 list performance overview of the M32C/88 Group (M32C/88T).
Table 1.1 M32C/88 Group (M32C/88T) Performance (144-Pin Package)
Characteristic
Basic Instructions
Minimum Instruction Execution Time
Operating Mode
Address Space
Memory Capacity
Peripheral I/O Port
Function Multifunction Timer
CPU
Intelligent I/O
Serial I/O
CAN Module
A/D Converter
D/A Converter
DMAC
DMAC II
CRC Calculation Circuit
X/Y Converter
Watchdog Timer
Interrupt
Clock Generation Circuit
Oscillation Stop Detect Function
Cold Start-up/Warm Start-up
Determine Function
Electrical Supply Voltage
Charact- Power Consumption
eristics
Flash
Program/Erase Supply Voltage
Memory Program and Erase Endurance
Operating Ambient Temperature
Package
Performance
108 instructions
31.3 ns (f(BCLK)=32 MHz, VCC=4.2 V to 5.5 V)
Single-chip mode
16 Mbytes
See Table 1.3
123 I/O pins and 1 input pin
Timer A: 16 bits x 5 channels, Timer B: 16 bits x 6 channels
Three-phase motor control circuit
Time measurement function or Waveform generating function:
16 bits x 8 channels
Communication function (Clock synchronous serial I/O, Clock asynchronous serial I/O, HDLC data processing)
5 Channels
Clock synchronous serial I/O, Clock asynchronous serial I/O,
IEBus(1), I2C bus(2)
3 channels Supporting CAN 2.0B specification
10-bit A/D converter: 1 circuit, 34 channels
8 bits x 2 channels
4 channels
Can be activated by all peripheral function interrupt sources
Immediate transfer, Calculation transfer and Chain transfer functions
CRC-CCITT
16 bits x 16 bits
15 bits x 1 channel (with prescaler)
40 internal and 8 external sources, 5 software sources
Interrupt priority level: 7
4 circuits
Main clock oscillation circuit(*), Sub clock oscillation circuit(*), On-chip
oscillator, PLL frequency synthesizer
(*)Equipped with a built-in feedback resistor. Ceramic resonator or
crystal oscillator must be connected externally
Main clock oscillation stop detect function
On-chip (option)
VCC=4.2 V to 5.5 V, (f(BCLK)=32 MHz)
28 mA (VCC=5 V, f(BCLK)=32 MHz)
10µA (VCC=5 V, f(BCLK)=32 kHz, in wait mode)
5.0 V ± 0.5 V
100 times (all space)
–40 to 85oC (T version)
–40 to 105oC (U version)
144-pin plastic molded LQFP
NOTES:
1. IEBus is a trademark of NEC Electronics Corporation.
2. I2C bus is a trademark of Koninklijke Philips Electronics N. V.
All options are on a request basis.
Rev. 1.10 Oct. 31, 2005
REJ03B0171-0110
Page 2
of 57
1. Overview
M32C/88 Group (M32C/88T)
Table 1.2 M32C/88 Group (M32C/88T) Performance (100-Pin Package)
Characteristic
Basic Instructions
Minimum Instruction Execution Time
Operating Mode
Address Space
Memory Capacity
Peripheral I/O Port
Function Multifunction Timer
CPU
Intelligent I/O
Serial I/O
CAN Module
A/D Converter
D/A Converter
DMAC
DMAC II
CRC Calculation Circuit
X/Y Converter
Watchdog Timer
Interrupt
Clock Generation Circuit
Oscillation Stop Detect Function
Cold Start-up/Warm Start-up
Determine Function
Electrical Supply Voltage
Charact- Power Consumption
eristics
Flash
Program/Erase Supply Voltage
Memory Program and Erase Endurance
Operating Ambient Temperature
Package
Performance
108 instructions
31.3 ns (f(BCLK)=32 MHz, VCC=4.2 V to 5.5 V)
Single-chip mode
16 Mbytes
See Table 1.3
87 I/O pins and 1 input pin
Timer A: 16 bits x 5 channels, Timer B: 16 bits x 6 channels
Three-phase motor control circuit
Time measurement function or Waveform generating function:
16 bits x 8 channels
Communication function (Clock synchronous serial I/O, Clock asynchronous serial I/O, HDLC data processing)
5 Channels
Clock synchronous serial I/O, Clock asynchronous serial I/O,
IEBus(1), I2C bus(2)
3 channels Supporting CAN 2.0B specification
10-bit A/D converter: 1 circuit, 34 channels
8 bits x 2 channels
4 channels
Can be activated by all peripheral function interrupt sources
Immediate transfer, Calculation transfer and Chain transfer functions
CRC-CCITT
16 bits x 16 bits
15 bits x 1 channel (with prescaler)
40 internal and 8 external sources, 5 software sources
Interrupt priority level: 7
4 circuits
Main clock oscillation circuit(*), Sub clock oscillation circuit(*), On-chip
oscillator, PLL frequency synthesizer
(*)Equipped with a built-in feedback resistor. Ceramic resonator or
crystal oscillator must be connected externally
Main clock oscillation stop detect function
On-chip (option)
VCC=4.2 V to 5.5 V, (f(BCLK)=32 MHz)
28 mA (VCC=5 V, f(BCLK)=32 MHz)
10µA (VCC=5 V, f(BCLK)=32 kHz, in wait mode)
5.0 V ± 0.5 V
100 times (all space)
–40 to 85oC (T version)
–40 to 105oC (U version)
100-pin plastic molded LQFP
NOTES:
1. IEBus is a trademark of NEC Electronics Corporation.
2. I2C bus is a trademark of Koninklijke Philips Electronics N. V.
All options are on a request basis.
Rev. 1.10 Oct. 31, 2005
REJ03B0171-0110
Page 3
of 57
1. Overview
M32C/88 Group (M32C/88T)
1.3 Block Diagram
Figure 1.1 shows a block diagram of the M32C/88 Group (M32C/88T) microcomputer.
8
8
8
8
8
8
8
Port P0
Port P1
Port P2
Port P3
Port P4
Port P5
Port P6
Peripheral Functions
Timer (16 bits)
Timer A: 5 channels
Timer B: 6 channels
DMAC
DMACII
CAN Module: 3 channels
7
X/Y Converter:
16 bits X 16 bits
D/A Converter:
8 bits X 2 channels
Port P8
Watchdog Timer (15 bits)
UART/Clock Synchronous Serial I/O:
5 channels
8
Three-Phase Motor Control Circuit
Port P7
Clock Generation Circuit
XIN - XOUT
XCIN - XCOUT
On-chip Oscillator
PLL Frequency Synthesizer
A/D Converter:
1 circuit
Standard: 10 inputs
Maximum: 34 inputs(2)
CRC Calculation Circuit (CCITT):
X16+X12+X5+1
P85
M32C/80 series CPU Core
Time Measurement: 8 channels
Wave Generating: 8 channels
Communication Functions:
Clock Synchronous Serial I/O,
UART,
HDLC Data Processing
Port P14
7
Port P15
8
Port P11
5
FLG
INTB
R2
ISP
R3
USP
A0
SVF
FB
SVP
SB
VCT
Port P13
8
8
(Note 1)
NOTES:
1. Ports P11 to P15 are provided in the 144-pin package only.
2. Included in the 144-pin package only.
Figure 1.1 M32C/88 Group (M32C/88T) Block Diagram
Rev. 1.10 Oct. 31, 2005
REJ03B0171-0110
Page 4
of 57
RAM
PC
A1
Port P12
ROM
Multiplier
8
R1L
8
R0L
R1H
Port P10
R0H
Memory
Port P9
Intelligent I/O
1. Overview
M32C/88 Group (M32C/88T)
1.4 Product Information
Table 1.3 lists the product information. Figure 1.2 shows the product numbering system.
Table 1.3 M32C/88 Group (1) (T version, M32C/88T)
Type Number
Package Type
M30882FJTGP
(D)
PLQP0144KA-A (144P6Q-A)
M30880FJTGP
(D)
PLQP0100KB-A (100P6Q-A)
M30882FHTGP
(D)
PLQP0144KA-A (144P6Q-A)
M30880FHTGP
(D)
PLQP0100KB-A (100P6Q-A)
M30882FWTGP
(D)
PLQP0144KA-A (144P6Q-A)
M30880FWTGP
(D)
PLQP0100KB-A (100P6Q-A)
As of October, 2005
ROM
Capacity
RAM
Capacity
Remarks
18K
Flash Memory
T version
(High-reliability
85° C)
512K+4K
384K+4K
320K+4K
(D): Under development
Table 1.3 M32C/88 Group (2) (U version, M32C/88T)
Type Number
Package Type
M30882FJUGP
(D)
PLQP0144KA-A (144P6Q-A)
M30880FJUGP
(D)
PLQP0100KB-A (100P6Q-A)
M30882FHUGP
(D)
PLQP0144KA-A (144P6Q-A)
M30880FHUGP
(D)
PLQP0100KB-A (100P6Q-A)
M30882FWUGP
(D)
PLQP0144KA-A (144P6Q-A)
M30880FWUGP
(D)
PLQP0100KB-A (100P6Q-A)
As of October, 2005
ROM
Capacity
RAM
Capacity
Remarks
18K
Flash Memory
U version
(High-reliability
105° C)
512K+4K
384K+4K
320K+4K
(D): Under development
NOTE:
Contact our sales office if you are interested in the V version.
Rev. 1.10 Oct. 31, 2005
REJ03B0171-0110
Page 5
of 57
1. Overview
M32C/88 Group (M32C/88T)
M30 88 0 F H T GP
Package Type:
GP = Package PLQP0100KB-A (100P6Q-A)
Package PLQP0144KA-A (144P6Q-A)
Classification:
T = T Version
U = U Version
ROM Capacity:
W = 320 Kbytes
H = 384 Kbytes
J = 512 Kbytes
Memory Type:
F = Flash Memory Version
RAM Capacity, Pin Count, etc
M32C/88 Group
M16C Family
Figure 1.2 Product Numbering System
Rev. 1.10 Oct. 31, 2005
REJ03B0171-0110
Page 6
of 57
1. Overview
M32C/88 Group (M32C/88T)
1.5 Pin Assignment
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
109
72
110
71
111
70
112
69
113
68
114
67
115
66
116
65
117
64
118
63
119
62
120
61
121
60
122
59
123
58
124
57
M32C/88 GROUP
(M32C/88T)
125
126
127
128
56
55
54
53
NOTES:
1. P70 / TA0OUT / TxD2 / SDA2 / SRxD2 / INPC16 / OUTC16
2. P70 and P71 are ports for the N-channel open drain output.
Figure 1.3 Pin Assignment for 144-Pin Package
Rev. 1.10 Oct. 31, 2005
REJ03B0171-0110
Page 7
of 57
P44
P45
P46
P47
P125
P126
P127
P50
P51
P52
P53 / CLKOUT
P130
P131
Vcc
P132
Vss
P133
P54
P55
P56
P57
P134
P135
P136
P137
P60 / CTS0 / RTS0 / SS0 / CAN2OUT
P61 / CLK0 / CAN2IN / CAN2WU
P62 / RxD0 / SCL0 / STxD0
P63 / TxD0 / SDA0 / SRxD0
P64 / CTS1 / RTS1 / SS1
P65 / CLK1
Vss
P66 / RxD1 / SCL1 / STxD1
Vcc
P67 / TxD1 / SDA1 / SRxD1
P70(1, 2)
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
CAN1OUT / SRxD4 / SDA4 / TxD4 / ANEX1 / P96
CAN1WU / CAN1IN / CLK4 / ANEX0 / P95
SS4 / RTS4 / CTS4 / TB4IN / DA1 / P94
SS3 / RTS3 / CTS3 / TB3IN / DA0 / P93
SRxD3 / SDA3 / TxD3 / TB2IN / P92
STxD3 / SCL3 / RxD3 / TB1IN / P91
CLK3 / TB0IN / P90
P146
P145
P144
OUTC17 / INPC17 / P143
OUTC16 / INPC16 / P142
OUTC15 / INPC15 / P141
OUTC14 / INPC14 / P140
BYTE
CNVss
XCIN / P87
XCOUT / P86
RESET
XOUT
Vss
XIN
Vcc
NMI / P85
INT2 / P84
CAN0IN / CAN1IN / INT1 / P83
CAN0OUT / CAN1OUT / INT0 / P82
INPC15 / OUTC15 / U / TA4IN / P81
ISRxD0 / U / TA4OUT / P80
ISCLK0 / INPC14 / OUTC14 / CAN0IN / CAN02IN / TA3IN / P77
ISTxD0 / INPC13 / OUTC13 / CAN0OUT / CAN02OUT / TA3OUT / P76
BE1IN / ISRxD1 / OUTC12 / INPC12 / W / TA2IN / P75
ISCLK1 / OUTC11 / INPC11 / W / TA2OUT / P74
BE1OUT / ISTxD1 / OUTC10 / INPC10 / SS2 / RTS2 / CTS2 / V / TA1IN / P73
CLK2 / V / TA1OUT / P72
(2)INPC17 / OUTC17 / STxD2 / SCL2 / RxD2 / TA0IN / TB5IN / P71
18
37
17
38
144
16
39
143
15
40
142
14
41
141
13
42
140
12
43
139
11
44
138
10
45
137
9
46
136
8
47
135
7
48
134
6
49
133
5
50
132
4
51
131
3
52
130
2
129
1
P10
AN07 / P07
AN06 / P06
AN05 / P05
AN04 / P04
P114
OUTC13 / INPC13 / P113
BE1IN / ISRxD1 / OUTC12 / INPC12 / P112
ISCLK1 / OUTC11 / INPC11 / P111
BE1OUT / ISTxD1 / OUTC10 / INPC10 / P110
AN03 / P03
AN02 / P02
AN01 / P01
AN00 / P00
AN157 / P157
AN156 / P156
AN155 / P155
AN154 / P154
AN153 / P153
ISRxD0 / AN152 / P152
ISCLK0 / AN151 / P151
Vss
ISTxD0 / AN150 / P150
Vcc
KI3 / AN7 / P107
KI2 / AN6 / P106
KI1 / AN5 / P105
KI0 / AN4 / P104
AN3 / P103
AN2 / P102
AN1 / P101
AVss
AN0 / P100
VREF
AVcc
STxD4 / SCL4 / RxD4 / ADTRG / P97
107
108
P11
P12
P13
P14
P15 / INT3
P16 / INT4
P17 / INT5
P20 / AN20
P21 / AN21
P22 / AN22
P23 / AN23
P24 / AN24
P25 / AN25
P26 / AN26
P27 / AN27
Vss
P30
Vcc
P120
P121
P122
P123
P124
P31
P32
P33
P34
P35
P36
P37
P40
P41
Vss
P42
Vcc
P43
Figures 1.3 and 1.4 show pin assignments (top view).
PLQP0144KA-A
(144P6Q-A)
1. Overview
M32C/88 Group (M32C/88T)
Table 1.4 Pin Characteristics for 144-Pin Package
Pin
No.
Control
Pin
Port
Interrupt
Pin
Timer Pin
UART/CAN Pin
Intelligent I/O Pin
Analog Pin
1
P96
TxD4/SDA4/SRxD4/CAN1OUT
ANEX1
2
3
P95
CLK4/CAN1IN/CAN1WU
P94
TB4IN
CTS4/RTS4/SS4
ANEX0
DA1
4
P93
TB3IN
5
6
P92
TB2IN
CTS3/RTS3/SS3
TxD3/SDA3/SRxD3
P91
TB1IN
RxD3/SCL3/STxD3
7
P90
TB0IN
CLK3
8
9
P146
10
P144
11
12
P143
INPC17/OUTC17
P142
INPC16/OUTC16
13
P141
INPC15/OUTC15
14
15 BYTE
16 CNVSS
P140
INPC14/OUTC14
17 XCIN
18 XCOUT
19 RESET
20 XOUT
P87
DA0
P145
P86
21 VSS
22 XIN
23 VCC
24
25
26
P85
27
28
29
P82
P80
TA4IN/U
TA4OUT/U
30
31
32
33
34
35
36
37
38 VCC
39 VSS
40
41
42
43
44
45
46
47
48
P77
TA3IN
CAN0IN/CAN02IN
ISRxD0
INPC14/OUTC14/ISCLK0
P76
TA3OUT
CAN0OUT/CAN02OUT
INPC13/OUTC13/ISTxD0
P75
P74
TA2IN/W
TA2OUT/W
P73
P72
TA1IN/V
TA1OUT/V
P71
TB5IN/TA0IN
P70
TA0OUT
P84
P83
P81
NMI
INT2
CAN0IN/CAN1IN
INT1
INT0
CAN0OUT/CAN1OUT
INPC15/OUTC15
INPC12/OUTC12/ISRxD1/BE1IN
P67
CTS2/RTS2/SS2
CLK2
RxD2/SCL2/STxD2
TxD2/SDA2/SRxD2
TxD1/SDA1/SRxD1
P66
RxD1/SCL1/STxD1
P65
CLK1
CTS1/RTS1/SS1
TxD0/SDA0/SRxD0
RxD0/SCL0/STxD0
P64
P63
P62
CLK0/CAN2IN/CAN2WU
P61
P60
CTS0/RTS0/SS0/CAN2OUT
P137
Rev. 1.10 Oct. 31, 2005
REJ03B0171-0110
Page 8
of 57
INPC11/OUTC11/ISCLK1
INPC10/OUTC10/ISTxD1/BE1OUT
INPC17/OUTC17
INPC16/OUTC16
1. Overview
M32C/88 Group (M32C/88T)
Table 1.4 Pin Characteristics for 144-Pin Package (Continued)
Pin
No.
Control
Pin
Port
49
P136
50
51
P135
52
P57
53
54
P56
55
P54
P133
56
57
Analog Pin
P132
VCC
P131
P130
P53
64
P51
P50
P52
65
66
P127
67
68
69
P126
P125
P47
P46
70
71
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
Intelligent I/O Pin
VSS
62
63
75
76
77
UART/CAN Pin
P55
61
72
73
74
Timer Pin
P134
58
59
60
Interrupt
Pin
P45
P44
VCC
P43
VSS
P42
P41
P40
P37
P36
P35
P34
P33
P32
P31
P124
P123
P122
P121
VCC
P120
VSS
P30
P27
AN27
P26
AN26
P25
AN25
Rev. 1.10 Oct. 31, 2005
REJ03B0171-0110
Page 9
of 57
1. Overview
M32C/88 Group (M32C/88T)
Table 1.4 Pin Characteristics for 144-Pin Package (Continued)
Pin
No.
Control
Pin
Port
Interrupt
Pin
Timer Pin
UART/CAN Pin
Intelligent I/O Pin
Analog Pin
97
P24
AN24
98
99
P23
AN23
P22
AN22
100
P21
AN21
101
102
P20
P17
INT5
103
P16
P15
INT4
INT3
104
105
AN20
P14
106
P13
107
108
P12
109
P10
110
111
P07
AN07
P06
AN06
112
P05
P04
AN05
AN04
P11
113
114
P114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
P113
INPC13/OUTC13
P112
INPC12/OUTC12/ISRxD1/BE1IN
P111
P110
INPC11/OUTC11/ISCLK1
INPC10/OUTC10/ISTxD1/BE1OUT
P03
AN03
P02
AN02
P01
AN01
P00
P157
AN00
AN157
P156
AN156
P155
AN155
P154
AN154
P153
AN153
P152
AN152
P151
ISRxD0
ISCLK0
P150
ISTxD0
AN150
AN151
VSS
VCC
P107
KI3
AN7
P106
KI2
AN6
P105
KI1
AN5
P104
KI0
AN4
P103
AN3
P102
AN2
P101
AN1
P100
AN0
AVSS
VREF
AVCC
RxD4/SCL4/STxD4
P97
Rev. 1.10 Oct. 31, 2005
REJ03B0171-0110
Page 10 of 57
ADTRG
1. Overview
P36
P37
P40
P41
52
51
P31
59
53
Vcc
60
P35
P30
61
54
Vss
62
P34
P27 / AN27
63
55
P26 / AN26
64
56
P25 / AN25
65
P32
P24 / AN24
66
P33
P23 / AN23
67
57
P22 / AN22
68
58
P20 / AN20
P21 / AN21
69
P17 / INT5
71
70
P15 / INT3
P16 / INT4
72
P14
74
73
P13
75
M32C/88 Group (M32C/88T)
P12
76
50
P42
P11
77
49
P43
P10
78
48
P44
AN07 / P07
79
47
P45
AN06 / P06
80
46
P46
AN05 / P05
81
45
P47
AN04 / P04
82
44
P50
AN03 / P03
83
43
P51
AN02 / P02
84
42
P52
AN01 / P01
85
41
P53 / CLKOUT
M32C/88 GROUP
(M32C/88T)
40
P54
39
P55
38
P56
37
P57
90
36
P60 / CTS0 / RTS0 / SS0 / CAN2OUT
AN3 / P103
91
35
P61 / CLK0 / CAN2IN / CAN2WU
AN2 / P102
92
34
P62 / RxD0 / SCL0 / STxD0
AN1 / P101
93
33
P63 / TxD0 / SDA0 / SRxD0
AN00 / P00
86
KI3 / AN7 / P107
87
KI2 / AN6 / P106
88
KI1 / AN5 / P105
89
KI0 / AN4 / P104
Rev. 1.10 Oct. 31, 2005
REJ03B0171-0110
Page 11 of 57
24
25
ISCLK1 / OUTC11 / INPC11 / W / TA2OUT / P74
19
OUTC15 / INPC15 / U / TA4IN / P81
BE1OUT / ISTxD1 / OUTC10 / SS2 / INPC10 / RTS2 / CTS2 / V / TA1IN / P73
18
CAN0OUT / CAN1OUT / INT0 / P82
23
17
CAN0IN / CAN1IN / INT1 / P83
BE1IN / ISRxD1 / OUTC12 / INPC12 / W / TA2IN / P75
16
INT2 / P84
22
15
NMI / P85
ISTxD0 / OUTC13 / INPC13 / CAN0OUT / CAN02OUT / TA3OUT / P76
14
Vcc
21
13
XIN
20
12
Vss
Figure 1.4 Pin Assignment for 100-Pin Package
ISRxD0 / U / TA4OUT / P80
11
XOUT
NOTES:
1. P70 / TA0OUT / TxD2 / SDA2 / SRxD2 / OUTC16 / INPC16
2. P71 / TA0IN / TB5IN / RxD2 / SCL2 / STxD2 / OUTC17 / INPC17
3. P96 / ANEX1 / TxD4 / SDA4 / SRxD4 / CAN1OUT
4. P70 and P71 are ports for the N-channel open drain output.
ISCLK0 / OUTC14 / INPC14 / CAN0IN / CAN02IN / TA3IN / P77
10
P72 / TA1OUT / V / CLK2
RESET
26
9
100
8
CAN1WU / CAN1IN / CLK4 / ANEX0 / P95
XCIN / P87
P71(2, 4)
XCOUT / P86
99
27
7
P70
P96
(3)
CNVss
28
6
98
5
P67 / TxD1 / SDA1 / SRxD1
STxD4 / SCL4 / RxD4 / ADTRG / P97
BYTE
29
CLK3 / TB0IN / P90
97
4
P66 / RxD1 / SCL1 / STxD1
AVcc
STxD3 / SCL3 / RxD3 / TB1IN / P91
30
3
96
SRxD3 / SDA3 / TxD3 / TB2IN / P92
P65 / CLK1
VREF
2
P64 / CTS1 / RTS1 / SS1
31
1
32
95
SS3 / RTS3 / CTS3 / TB3IN / DA0 / P93
94
SS4 / RTS4 / CTS4 / TB4IN / DA1 / P94
AVss
AN0 / P100
(1, 4)
PLQP0100KB-A
(100P6Q-A)
1. Overview
M32C/88 Group (M32C/88T)
Table 1.5 Pin Characteristics for 100-Pin Package
Pin
No.
Control
Pin
Port
Interrupt
Pin
Timer Pin
UART/CAN Pin
1
2
P94
P93
TB4IN
TB3IN
CTS4/RTS4/SS4
CTS3/RTS3/SS3
3
4
5
P92
P91
P90
TB2IN
TB1IN
TB0IN
TxD3/SDA3/SRxD3
RxD3/SCL3/STxD3
CLK3
6
7
8
BYTE
CNVSS
XCIN
P87
9
10
XCOUT
RESET
XOUT
P86
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Intelligent I/O Pin
DA1
DA0
VSS
XIN
VCC
P85
P84
P83
P82
P81
P80
P77
P76
P75
P74
P73
P72
P71
P70
P67
P66
NMI
INT2
CAN0IN/CAN1IN
CAN0OUT/CAN1OUT
INT1
INT0
TA4IN/U
TA4OUT/U
TA3IN
TA3OUT
TA2IN/W
TA2OUT/W
TA1IN/V
TA1OUT/V
TB5IN/TA0IN
TA0OUT
P65
P64
P63
P62
P61
P60
P57
P56
P55
P54
P53
P52
P51
P50
P47
P46
P45
P44
P43
P42
Rev. 1.10 Oct. 31, 2005
REJ03B0171-0110
Page 12 of 57
INPC15/OUTC15
CAN0IN/CAN02IN
CAN0OUT/CAN02OUT
Analog
Pin
ISRxD0
INPC14/OUTC14/ISCLK0
INPC13/OUTC13/ISTxD0
INPC12/OUTC12/ISRxD1/BE1IN
INPC11/OUTC11/ISCLK1
CTS2/RTS2/SS2
INPC10/OUTC10/ISTxD1/BE1OUT
CLK2
RxD2/SCL2/STxD2
INPC17/OUTC17
TxD2/SDA2/SRxD2
INPC16/OUTC16
TxD1/SDA1/SRxD1
RxD1/SCL1/STxD1
CLK1
CTS1/RTS1/SS1
TxD0/SDA0/SRxD0
RxD0/SCL0/STxD0
CLK0/CAN2IN/CAN2WU
CTS0/RTS0/SS0/CAN2OUT
1. Overview
M32C/88 Group (M32C/88T)
Table 1.5 Pin Characteristics for 100-Pin Package (Continued)
Pin
No.
Control
Pin
51
52
Analog
Pin
P31
VCC
P30
VSS
P27
P26
AN27
AN26
P25
AN25
P24
P23
P22
AN24
AN23
AN22
P21
AN21
P20
P17
P16
P15
AN20
INT5
INT4
INT3
P14
P13
P12
P11
84
85
86
P10
P07
AN07
P06
P05
AN06
AN05
P04
P03
AN04
AN03
P02
P01
AN02
AN01
P00
P107
87
88
89
P106
P105
90
91
92
99
100
Intelligent I/O Pin
P34
P33
P32
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
96
97
98
UART/CAN Pin
P35
65
66
67
93
94
95
Timer Pin
P40
P37
P36
56
57
58
62
63
64
Interrupt
Pin
P41
53
54
55
59
60
61
Port
P104
AN00
AN7
KI3
KI2
AN6
AN5
KI1
KI0
AN4
P103
P102
P101
AN3
AN2
AN1
P100
AN0
AVSS
VREF
AVCC
P97
P96
RxD4/SCL4/STxD4
TxD4/SDA4/SRxD4/CAN1OUT
P95
CLK4/CAN1IN/CAN1WU
Rev. 1.10 Oct. 31, 2005
REJ03B0171-0110
Page 13 of 57
ADTRG
ANEX1
ANEX0
1. Overview
M32C/88 Group (M32C/88T)
1.6 Pin Description
Table 1.6 Pin Description (100-Pin and 144-Pin Packages)
Classsfication
Symbol
I/O Type
Function
Power Supply
VCC
I
Apply 4.2 to 5.5 V to both VCC pins.
Analog Power
VSS
AVCC
I
Apply 0 V to the VSS pin
Supplies power to the A/D converter. Connect the AVCC pin to VCC and the
Supply
Reset Input
AVSS
____________
RESET
I
AVSS pin to VSS
___________
The microcomputer is in a reset state when "L" is applied to the RESET pin
CNVSS
CNVSS
Input to Switch BYTE
I
I
Switches processor mode. Connect the CNVSS pin to VSS
Connect the BYTE pin to VSS
Main Clock Input XIN
I
I/O pins for the main clock oscillation circuit. Connect a ceramic resonator
Main Clock Output XOUT
O
Sub Clock Input XCIN
I
Sub Clock output XCOUT
O
O
Outputs the clock having the same frequency as fC, f8 or f32
I
Input pins for the INT interrupt
I
I
Input pin for the NMI interrupt
Input pins for the key input interrupt
External Data Bus
Width
Clock Output
CLKOUT
______
________
INT Interrupt
Input
INT0 to
________
INT5
_______
_______
Timer B
TA0OUT to
TA4OUT
between XCIN and XCOUT. To apply external clock, apply it to XCIN and
leave XCOUT open
I/O
I/O pins for the timer A0 to A4
(TA0OUT is a pin for the N-channel open drain output.)
TA0IN to
TA4IN
I
Input pins for Timer A0 to A4
TB0IN to
TB5IN
I
Input pins for Timer B0 to B5
O
Output pins for the three-phase motor control timer
CTS0 to CTS4
_________
_________
RTS0 to RTS4
I
O
Input pins for data transmission control
Output pins for data reception control
CLK0 to
CLK4
I/O
Inputs and outputs the transfer clock
RxD0 to
RxD4
I
Inputs serial data
TxD0 to
TxD4
O
Outputs serial data
(TxD2 is a pin for the N-channel open drain output.)
SDA0 to
SDA4
I/O
Inputs and outputs serial data
(SDA2 is a pin for the N-channel open drain output.)
___
_________
I2C Mode
I/O pins for the sub clock oscillation circuit. Connect a crystal oscillator
_______
___
Three-phase Motor U, U, V, V,
___
Control Timer Output W, W
Serial I/O
to XIN and leave XOUT open.
______
NMI Interrupt Input NMI
_____
_____
Key Input Interrupt KI0 to KI3
Timer A
or crystal oscillator between XIN and XOUT. To apply external clock, apply it
________
SCL0 to
SCL4
Inputs and outputs the transfer clock
(SCL2 is a pin for the N-channel open drain output.)
Serial I/O
STxD0 to
Special Function STxD4
O
Outputs serial data when slave mode is selected
(STxD2 is a pin for the N-channel open drain output.)
SRxD0 to
SRxD4
I
Inputs serial data when slave mode is selected
I
Input pins to control serial I/O special function
_______
_______
SS0 to SS4
I : Input
O : Output
Rev. 1.10 Oct. 31, 2005
REJ03B0171-0110
I/O : Input and output
Page 14 of 57
1. Overview
M32C/88 Group (M32C/88T)
Table 1.6 Pin Description (100-Pin and 144-Pin Packages) (Continued)
Classsfication
Symbol
I/O Type
Function
Reference
VREF
I
Applies reference voltage to the A/D converter and D/A converter
Voltage Input
A/D Converter
AN0 to AN7
I
Analog input pins for the A/D converter
AN00 to AN07
AN20 to AN27
___________
D/A Converter
Intelligent I/O
CAN
ADTRG
ANEX0
I
I/O
Input pin for an external A/D trigger
Extended analog input pin for the A/D converter and output pin in external
ANEX1
I
op-amp connection mode
Extended analog input pin for the A/D converter
DA0, DA1
INPC10 to
O
I
Output pin for the D/A converter
Input pins for the time measurement function
INPC17
OUTC10 to
O
Output pins for the waveform generating function
OUTC17
ISCLK0
I/O
(OUTC16 and OUTC17 assigned to P70 and P71 are pins for the N-channel open drain output.)
Inputs and outputs the clock for the intelligent I/O communication function
ISCLK1
ISRXD0
I
Inputs data for the intelligent I/O communication function
ISRXD1
ISTXD0
O
Outputs data for the intelligent I/O communication function
ISTXD1
BE1IN
I
Inputs data for the intelligent I/O communication function
BE1OUT
CAN0IN
O
I
Outputs data for the intelligent I/O communication function
Input pin for the CAN communication function
O
Output pin for the CAN communication function
I
Input pin for the CANi wake-up interrupt (i=1, 2)
CAN02IN
CAN1IN
CAN2IN
CAN0OUT
CAN02OUT
CAN1OUT
CAN2OUT
_______________
CAN1WU
________________
I/O Ports
CAN2WU
P00 to P07
I/O
under the control of the direction register. An input port can be set, by
program, for a pull-up resistor available or for no pull-up resister available in
P30 to P37
P40 to P47
4-bit units
P50 to P57
P60 to P67
I/O
P70 to P77
P90 to P97
P100 to P107
P80 to P84
Input Port
I : Input
8-bit I/O ports for CMOS. Each port can be programmed for input or output
P10 to P17
P20 to P27
P86, P87
P85
O : Output
Rev. 1.10 Oct. 31, 2005
REJ03B0171-0110
I/O ports having equivalent functions to P0
(P70 and P71 are ports for the N-channel open drain output.)
I/O
I/O ports having equivalent functions to P0
_______
I
I/O : Input and output
Page 15 of 57
_______
Shares a pin with NMI. NMI input state can be got by reading P8 5
1. Overview
M32C/88 Group (M32C/88T)
Table 1.6 Pin Description (144-Pin Package Only) (Continued)
Classsfication
Symbol
I/O Type
A/D Converter
AN150 to
AN157
I
I/O Ports
P110 to
P114
I/O
Function
Analog input pins for the A/D converter
I/O ports having equivalent functions to P0
P120 to
P127
P130 to
P137
P140 to
P146
P150 to
P157
I : Input
O : Output
Rev. 1.10 Oct. 31, 2005
REJ03B0171-0110
I/O : Input and output
Page 16 of 57
2. Central Processing Unit (CPU)
M32C/88 Group (M32C/88T)
2. Central Processing Unit (CPU)
Figure 2.1 shows the CPU registers.
The register bank is comprised of 8 registers (R0, R1, R2, R3, A0, A1, SB and FB) out of 28 CPU registers.
Two sets of register banks are provided.
b31
b15
General Registers
b0
R2
R0H
R3
R1H
R0L
R1L
Data Register(1)
R2
R3
b23
A0
Address Register(1)
A1
SB
Static Base Register(1)
FB
Frame Base Register(1)
USP
User Stack Pointer
ISP
Interrupt Stack Pointer
INTB
Interrupt Table Register
Program Counter
PC
FLG
b15
Flag Register
b8 b7
IPL
b0
U I O B S Z D C
Carry Flag
Debug Flag
Zero Flag
Sign Flag
Register Bank Select Flag
Overflow Flag
Interrupt Enable Flag
Stack Pointer Select Flag
Reserved Space
Processor Interrupt Priority Level
Reserved Space
b15
High-speed Interrupt Registers
b0
SVF
b23
Flag Save Register
SVP
PC Save Register
VCT
Vector Register
b7
DMAC-associated Registers
b0
DMD0
DMD1
b15
DCT0
DCT1
DMA Mode Register
DMA Transfer Count Register
DRC0
DRC1
b23
DMA Transfer Count Reload Register
DMA0
DMA1
DMA Memory Address Register
DRA0
DRA1
DMA Memory Address Reload Register
DSA0
DSA1
DMA SFR Address Register
NOTE:
1. The register bank is comprised of these registers. Two sets of register banks are provided.
Figure 2.1 CPU Register
Rev. 1.10 Oct. 31, 2005
REJ03B0171-0110
Page 17 of 57
M32C/88 Group (M32C/88T)
2. Central Processing Unit (CPU)
2.1 General Registers
2.1.1 Data Registers (R0, R1, R2 and R3)
R0, R1, R2 and R3 are 16-bit registers for transfer, arithmetic and logic operations. R0 and R1 can be
split into high-order bits (R0H) and low-order bits (R0L) to be used separately as 8-bit data registers.
R0 can be combined with R2 to be used as a 32-bit data register (R2R0). The same applies to R1 and
R3.
2.1.2 Address Registers (A0 and A1)
A0 and A1 are 24-bit registers for A0-/A1-indirect addressing, A0-/A1-relative addressing, transfer, arithmetic and logic operations.
2.1.3 Static Base Register (SB)
SB is a 24-bit register for SB-relative addressing.
2.1.4 Frame Base Register (FB)
FB is a 24-bit register for FB-relative addressing.
2.1.5 Program Counter (PC)
PC, 24 bits wide, indicates the address of an instruction to be executed.
2.1.6 Interrupt Table Register (INTB)
INTB is a 24-bit register indicating the starting address of an relocatable interrupt vector table.
2.1.7 User Stack Pointer (USP), Interrupt Stack Pointer (ISP)
The stack pointers (SP), USP and ISP, are 24 bits wide each. The U flag is used to switch between USP
and ISP. Refer to 2.1.8 Flag Register (FLG) for details on the U flag. Set USP and ISP to even
addresses to execute an interrupt sequence efficiently.
2.1.8 Flag Register (FLG)
FLG is a 16-bit register indicating a CPU state.
2.1.8.1 Carry Flag (C)
The C flag indicates whether carry or borrow has occurred after executing an instruction.
2.1.8.2 Debug Flag (D)
The D flag is for debug only. Set to "0".
2.1.8.3 Zero Flag (Z)
The Z flag is set to "1" when the value of zero is obtained from an arithmetic operation; otherwise "0".
2.1.8.4 Sign Flag (S)
The S flag is set to "1" when a negative value is obtained from an arithmetic operation; otherwise "0".
Rev. 1.10 Oct. 31, 2005
REJ03B0171-0110
Page 18 of 57
M32C/88 Group (M32C/88T)
2. Central Processing Unit (CPU)
2.1.8.5 Register Bank Select Flag (B)
The register bank 0 is selected when the B flag is set to "0". The register bank 1 is selected when this
flag is set to "1".
2.1.8.6 Overflow Flag (O)
The O flag is set to "1" when the result of an arithmetic operation overflows; otherwise "0".
2.1.8.7 Interrupt Enable Flag (I)
The I flag enables a maskable interrupt.
Interrupt is disabled when the I flag is set to "0" and enabled when the I flag is set to "1". The I flag is
set to "0" when an interrupt is acknowledged.
2.1.8.8 Stack Pointer Select Flag (U)
ISP is selected when the U flag is set to "0". USP is selected when this flag is set to "1".
The U flag is set to "0" when a hardware interrupt is acknowledged or the INT instruction of software
interrupt numbers 0 to 31 is executed.
2.1.8.9 Processor Interrupt Priority Level (IPL)
IPL, 3 bits wide, assigns processor interrupt priority levels from level 0 to level 7.
If a requested interrupt has greater priority than IPL, the interrupt is enabled.
2.1.8.10 Reserved Space
When writing to a reserved space, set to "0". When reading, its content is indeterminate.
2.2 High-Speed Interrupt Registers
Registers associated with the high-speed interrupt are as follows:
- Flag save register (SVF)
- PC save register (SVP)
- Vector register (VCT)
2.3 DMAC-Associated Registers
Registers associated with DMAC are as follows:
- DMA mode register (DMD0, DMD1)
- DMA transfer count register (DCT0, DCT1)
- DMA transfer count reload register (DRC0, DRC1)
- DMA memory address register (DMA0, DMA1)
- DMA SFR address register (DSA0, DSA1)
- DMA memory address reload register (DRA0, DRA1)
Rev. 1.10 Oct. 31, 2005
REJ03B0171-0110
Page 19 of 57
3. Memory
M32C/88 Group (M32C/88T)
3. Memory
Figure 3.1 shows a memory map of the M32C/88 Group (M32C/88T).
The M32C/88 Group (M32C/88T) provides 16-Mbyte address space addressed from 000000 16 to
FFFFFF16.
The internal ROM is allocated from address FFFFFF16 to lower. For example, a 64-Kbyte internal ROM is
addressed from FF000016 to FFFFFF16.
The fixed interrupt vectors are allocated from address FFFFDC16 to FFFFFF16. It stores the starting address of each interrupt routine.
The internal RAM is allocated from address 00040016 to higher. For example, a 10-Kbyte internal RAM is
allocated from address 00040016 to 002BFF16. Besides storing data, it becomes stacks when the subroutine is called or an interrupt is acknowledged.
SFRs, consisting of control registers for peripheral functions such as I/O port, A/D converter, serial I/O,
timers, is allocated from address 00000016 to 0003FF16. All blank spaces within SFRs are reserved and
cannot be accessed by users.
The special page vectors are addressed from FFFE0016 to FFFFDB16. It is used for the JMPS instruction
and JSRS instruction. Refer to the Renesas publication M32C/80 Series Software Manual for details.
00000016
SFRs
00040016
XXXXXX16
Internal RAM
Reserved Space
00F00016
FFFE00 16
Special Page
Vector Table
(1)
Internal ROM
(Data space)
Internal RAM
XXXXXX16
Capacity
18 Kbytes
004BFF16
Internal ROM
YYYYYY16
Capacity
FB000016
320 Kbytes
FA000016
384 Kbytes
F8000016
512 Kbytes
00FFFF16
FFFFDC 16
Undefined Instruction
Overflow
BRK Instruction
Address Match
Reserved Space
Watchdog Timer(2)
YYYYYY16
Internal ROM
FFFFFF16
FFFFFF 16
NOTES:
1. Additional 4-Kbyte space is provided in the flash memory version for storing data.
2. Watchdog timer interrupt and oscillation stop detection interrupt share vectors.
Figure 3.1 Memory Map
Rev. 1.10 Oct. 31, 2005
REJ03B0171-0110
Page 20 of 57
NMI
Reset
4. Special Function Registers (SFRs)
M32C/88 Group (M32C/88T)
4. Special Function Registers (SFRs)
Address
000016
000116
000216
000316
000416
000516
000616
000716
000816
000916
000A16
000B16
000C16
000D16
000E16
000F16
001016
001116
001216
001316
001416
001516
001616
001716
001816
001916
001A16
001B16
001C16
001D16
001E16
001F16
002016
002116
002216
002316
002416
002516
002616
002716
002816
002916
002A16
002B16
002C16
002D16
002E16
002F16
Register
Symbol
Value after RESET
Processor Mode Register(1)
Processor Mode Register 1
System Clock Control Register 0
System Clock Control Register 1
PM0
PM1
CM0
CM1
1000 00002(CNVss pin ="L")
0016
0000 10002
0010 00002
Address Match Interrupt Enable Register
Protect Register
AIER
PRCR
0016
XXXX 00002
Main Clock Division Register
Oscillation Stop Detection Register
Watchdog Timer Start Register
Watchdog Timer Control Register
MCD
CM2
WDTS
WDC
XXX0 10002
0016
XX16
000X XXXX2
Address Match Interrupt Register 0
RMAD0
00000016
Processor Mode Register 2
PM2
0016
Address Match Interrupt Register 1
RMAD1
00000016
Address Match Interrupt Register 2
RMAD2
00000016
Address Match Interrupt Register 3
RMAD3
00000016
PLL Control Register 0
PLL Control Register 1
PLC0
PLC1
0001 X0102
000X 00002
Address Match Interrupt Register 4
RMAD4
00000016
Address Match Interrupt Register 5
RMAD5
00000016
X: Indeterminate
Blank spaces are reserved. No access is allowed.
NOTE:
1. The PM01 and PM00 bits in the PM0 register maintain values set before reset, even after software reset or watchdog timer reset has been performed.
Rev. 1.10 Oct. 18, 2005
REJ09B0162-0110
Page 21 of 435
4. Special Function Registers (SFRs)
M32C/88 Group (M32C/88T)
Address
006016
003016
003116
003216
003316
003416
003516
003616
003716
003816
003916
003A16
003B16
003C16
003D16
003E16
003F16
004016
004116
004216
004316
004416
004516
004616
004716
004816
004916
004A16
004B16
004C16
004D16
004E16
004F16
005016
005116
005216
005316
005416
005516
005616
005716
005816
005916
005A16
005B16
005C16
005D16
005E16
005F16
Register
Address Match Interrupt Register 6
Address Match Interrupt Register 7
Symbol
RMAD6
RMAD7
Value after RESET
00000016
00000016
Flash Memory Control Register 1
FMR1
0000 01012
Flash Memory Control Register 0
FMR0
0000 00012
X: Indeterminate
Blank spaces are reserved. No access is allowed.
Rev. 1.10 Oct. 18, 2005
REJ09B0162-0110
Page 22 of 435
4. Special Function Registers (SFRs)
M32C/88 Group (M32C/88T)
Address
006016
006116
006216
006316
006416
006516
006616
006716
006816
006916
006A16
006B16
006C16
006D16
006E16
006F16
007016
007116
007216
007316
007416
007516
007616
007716
007816
007916
007A16
007B16
007C16
007D16
007E16
007F16
008016
008116
008216
008316
008416
008516
008616
008716
008816
008916
008A16
008B16
008C16
008D16
008E16
008F16
Register
Symbol
Value after RESET
DMA0 Interrupt Control Register
Timer B5 Interrupt Control Register
DMA2 Interrupt Control Register
UART2 Receive /ACK Interrupt Control Register
Timer A0 Interrupt Control Register
UART3 Receive /ACK Interrupt Control Register
Timer A2 Interrupt Control Register
UART4 Receive /ACK Interrupt Control Register
Timer A4 Interrupt Control Register
UART0/UART3 Bus Conflict Detect Interrupt Control Register
DM0IC
TB5IC
DM2IC
S2RIC
TA0IC
S3RIC
TA2IC
S4RIC
TA4IC
BCN0IC/BCN3IC
XXXX X0002
XXXX X0002
XXXX X0002
XXXX X0002
XXXX X0002
XXXX X0002
XXXX X0002
XXXX X0002
XXXX X0002
XXXX X0002
UART0 Receive/ACK Interrupt Control Register
A/D0 Conversion Interrupt Control Register
UART1 Receive/ACK Interrupt Control Register
Intelligent I/O Interrupt Control Register 0/
CAN Interrupt 3 Control Register
Timer B1 Interrupt Control Register
Intelligent I/O Interrupt Control Register 2/
CAN Interrupt 6 Control Register
Timer B3 Interrupt Control Register
Intelligent I/O Interrupt Control Register 4
INT5 Interrupt Control Register
CAN Interrupt 8 Control Register
INT3 Interrupt Control Register
Intelligent I/O Interrupt Control Register 8
INT1 Interrupt Control Register
Intelligent I/O Interrupt Control Register 10/
S0RIC
AD0IC
S1RIC
IIO0IC/
CAN3IC
TB1IC
IIO2IC/
CAN6IC
TB3IC
IIO4IC
INT5IC
CAN8IC
INT3IC
IIO8IC
INT1IC
IIO10IC/
XXXX X0002
XXXX X0002
XXXX X0002
CAN Interrupt 1 Control Register
CAN1IC
CAN Interrupt 2 Control Register
CAN2IC
XXXX X0002
DMA1 Interrupt Control Register
UART2 Transmit /NACK Interrupt Control Register
DMA3 Interrupt Control Register
UART3 Transmit /NACK Interrupt Control Register
Timer A1 Interrupt Control Register
UART4 Transmit /NACK Interrupt Control Register
Timer A3 Interrupt Control Register
UART2 Bus Conflict Detect Interrupt Control Register
DM1IC
S2TIC
DM3IC
S3TIC
TA1IC
S4TIC
TA3IC
BCN2IC
XXXX X0002
XXXX X0002
XXXX X0002
XXXX X0002
XXXX X0002
XXXX X0002
XXXX X0002
XXXX X0002
X: Indeterminate
Blank spaces are reserved. No access is allowed.
Rev. 1.10 Oct. 18, 2005
REJ09B0162-0110
Page 23 of 435
XXXX X0002
XXXX X0002
XXXX X0002
XXXX X0002
XXXX X0002
XX00 X0002
XXXX X0002
XX00 X0002
XXXX X0002
XX00 X0002
XXXX X0002
4. Special Function Registers (SFRs)
M32C/88 Group (M32C/88T)
Address
009016
009116
009216
009316
009416
009516
009616
009716
009816
009916
009A16
009B16
009C16
009D16
009E16
009F16
00A016
00A116
00A216
00A316
00A416
00A516
00A616
00A716
00A816
00A916
00AA16
00AB16
00AC16
00AD16
00AE16
00AF16
00B016
00B116
00B216
00B316
00B416
00B516
00B616
00B716
00B816
00B916
00BA16
00BB16
00BC16
00BD16
00BE16
00BF16
Register
UART0 Transmit /NACK Interrupt Control Register
UART1/UART4 Bus Conflict Detect Interrupt Control Register
UART1 Transmit/NACK Interrupt Control Register
Key Input Interrupt Control Register
Timer B0 Interrupt Control Register
Intelligent I/O Interrupt Control Register 1/
CAN Interrupt 4 Control Register
Timer B2 Interrupt Control Register
Intelligent I/O Interrupt Control Register 3/
CAN Interrupt 7 Control Register
Timer B4 Interrupt Control Register
CAN Interrupt 5 Control Register
INT4 Interrupt Control Register
Symbol
S0TIC
BCN1IC/BCN4IC
S1TIC
KUPIC
TB0IC
IIO1IC/
CAN4IC
TB2IC
IIO3IC/
CAN7IC
TB4IC
CAN5IC
INT4IC
Value after RESET
XXXX X0002
XXXX X0002
XXXX X0002
XXXX X0002
XXXX X0002
INT2 Interrupt Control Register
Intelligent I/O Interrupt Control Register 9/
INT2IC
IIO9IC/
XX00 X0002
CAN Interrupt 0 Control Register
INT0 Interrupt Control Register
Exit Priority Control Register
Interrupt Request Register 0
Interrupt Request Register 1
Interrupt Request Register 2
Interrupt Request Register 3
Interrupt Request Register 4
Interrupt Request Register 5
Interrupt Request Register 6
CAN0IC
INT0IC
RLVL
IIO0IR
IIO1IR
IIO2IR
IIO3IR
IIO4IR
IIO5IR
IIO6IR
XX00 X0002
XXXX 00002
0000 000X2
0000 000X2
0000 000X2
0000 000X2
0000 000X2
0000 000X2
0000 000X2
Interrupt Request Register 8
Interrupt Request Register 9
Interrupt Request Register 10
Interrupt Request Register 11
IIO8IR
IIO9IR
IIO10IR
IIO11IR
0000 000X2
0000 000X2
0000 000X2
0000 000X2
Interrupt Enable Register 0
Interrupt Enable Register 1
Interrupt Enable Register 2
Interrupt Enable Register 3
Interrupt Enable Register 4
Interrupt Enable Register 5
Interrupt Enable Register 6
IIO0IE
IIO1IE
IIO2IE
IIO3IE
IIO4IE
IIO5IE
IIO6IE
0016
0016
0016
0016
0016
0016
0016
Interrupt Enable Register 8
Interrupt Enable Register 9
Interrupt Enable Register 10
Interrupt Enable Register 11
IIO8IE
IIO9IE
IIO10IE
IIO11IE
0016
0016
0016
0016
X: Indeterminate
Blank spaces are reserved. No access is allowed.
Rev. 1.10 Oct. 18, 2005
REJ09B0162-0110
Page 24 of 435
XXXX X0002
XXXX X0002
XXXX X0002
XXXX X0002
XXXX X0002
XX00 X0002
XXXX X0002
4. Special Function Registers (SFRs)
M32C/88 Group (M32C/88T)
Address
00C016
00C116
00C216
00C316
00C416
00C516
00C616
00C716
00C816
00C916
00CA16
00CB16
00CC16
00CD16
00CE16
00CF16
00D016
00D116
00D216
00D316
00D416
00D516
00D616
00D716
00D816
00D916
00DA16
00DB16
00DC16
00DD16
00DE16
00DF16
00E016
00E116
00E216
00E316
00E416
00E516
00E616
00E716
00E816
00E916
00EA16
00EB16
00EC16
00ED16
00EE16
00EF16
Register
Symbol
Value after RESET
SI/O Receive Buffer Register 0
G0RB
Transmit Buffer/Receive Data Register 0
G0TB/G0DR
XXXX XXXX2
XXX0 XXXX2
XX16
Receive Input Register 0
SI/O Communication Mode Register 0
Transmit Output Register 0
SI/O Communication Control Register 0
G0RI
G0MR
G0TO
G0CR
XX16
0016
XX16
0000 X0112
X: Indeterminate
Blank spaces are reserved. No access is allowed.
Rev. 1.10 Oct. 18, 2005
REJ09B0162-0110
Page 25 of 435
M32C/88 Group (M32C/88T)
Address
00F016
00F116
00F216
00F316
00F416
00F516
00F616
00F716
00F816
00F916
00FA16
00FB16
00FC16
00FD16
00FE16
00FF16
010016
010116
010216
010316
010416
010516
010616
010716
010816
010916
010A16
010B16
010C16
010D16
010E16
010F16
011016
011116
011216
011316
011416
011516
011616
011716
011816
011916
011A16
011B16
011C16
011D16
011E16
011F16
4. Special Function Registers (SFRs)
Register
Data Compare Register 00
Data Compare Register 01
Data Compare Register 02
Data Compare Register 03
Data Mask Register 00
Data Mask Register 01
Communication Clock Select Register
Symbol
G0CMP0
G0CMP1
G0CMP2
G0CMP3
G0MSK0
G0MSK1
CCS
Receive CRC Code Register 0
G0RCRC
Transmit CRC Code Register 0
G0TCRC
SI/O Extended Mode Register 0
SI/O Extended Receive Control Register 0
SI/O Special Communication Interrupt Detect Register 0
SI/O Extended Transmit Control Register 0
G0EMR
G0ERC
G0IRF
G0ETC
Time Measurement/Waveform Generating Register 10
G1TM0/G1PO0
Time Measurement/Waveform Generating Register 11
G1TM1/G1PO1
Time Measurement/Waveform Generating Register 12
G1TM2/G1PO2
Time Measurement/Waveform Generating Register 13
G1TM3/G1PO3
Time Measurement/Waveform Generating Register 14
G1TM4/G1PO4
Time Measurement/Waveform Generating Register 15
G1TM5/G1PO5
Time Measurement/Waveform Generating Register 16
G1TM6/G1PO6
Time Measurement/Waveform Generating Register 17
G1TM7/G1PO7
Waveform Generating Control Register 10
Waveform Generating Control Register 11
Waveform Generating Control Register 12
Waveform Generating Control Register 13
Waveform Generating Control Register 14
Waveform Generating Control Register 15
Waveform Generating Control Register 16
Waveform Generating Control Register 17
Time Measurement Control Register 10
Time Measurement Control Register 11
Time Measurement Control Register 12
Time Measurement Control Register 13
Time Measurement Control Register 14
Time Measurement Control Register 15
Time Measurement Control Register 16
Time Measurement Control Register 17
G1POCR0
G1POCR1
G1POCR2
G1POCR3
G1POCR4
G1POCR5
G1POCR6
G1POCR7
G1TMCR0
G1TMCR1
G1TMCR2
G1TMCR3
G1TMCR4
G1TMCR5
G1TMCR6
G1TMCR7
Value after RESET
XX16
XX16
XX16
XX16
XX16
XX16
XXXX 00002
XX16
X: Indeterminate
Blank spaces are reserved. No access is allowed.
Rev. 1.10 Oct. 18, 2005
REJ09B0162-0110
Page 26 of 435
XX16
0016
0016
0016
0016
0016
0000 0XXX2
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
0000 X0002
0X00 X0002
0X00 X0002
0X00 X0002
0X00 X0002
0X00 X0002
0X00 X0002
0X00 X0002
0016
0016
0016
0016
0016
0016
0016
0016
4. Special Function Registers (SFRs)
M32C/88 Group (M32C/88T)
Address
012016
012116
012216
012316
012416
012516
012616
012716
012816
012916
012A16
012B16
012C16
012D16
012E16
012F16
013016
013116
013216
013316
013416
013516
013616
013716
013816
013916
013A16
013B16
013C16
013D16
013E16
013F16
014016
014116
014216
014316
014416
014516
014616
014716
014816
014916
014A16
014B16
014C16
014D16
to
016F16
Register
Symbol
Value after RESET
XX16
Base Timer Register 1
G1BT
Base Timer Control Register 10
Base Timer Control Register 11
Time Measurement Prescaler Register 16
Time Measurement Prescaler Register 17
Function Enable Register 1
Function Select Register 1
G1BCR0
G1BCR1
G1TPR6
G1TPR7
G1FE
G1FS
SI/O Receive Buffer Register 1
G1RB
Transmit Buffer/Receive Data Register 1
G1TB/G1DR
X000 XXXX2
XX16
Receive Input Register 1
SI/O Communication Mode Register 1
Transmit Output Register 1
SI/O Communication Control Register 1
Data Compare Register 10
Data Compare Register 11
Data Compare Register 12
Data Compare Register 13
Data Mask Register 10
Data Mask Register 11
G1RI
G1MR
G1TO
G1CR
G1CMP0
G1CMP1
G1CMP2
G1CMP3
G1MSK0
G1MSK1
XX16
0016
XX16
0000 X0112
XX16
XX16
XX16
XX16
XX16
XX16
Receive CRC Code Register 1
G1RCRC
Transmit CRC Code Register 1
G1TCRC
SI/O Extended Mode Register 1
SI/O Extended Receive Control Register 1
SI/O Special Communication Interrupt Detection Register 1
SI/O Extended Transmit Control Register 1
G1EMR
G1ERC
G1IRF
G1ETC
XX16
0016
X000 000X2
0016
0016
0016
0016
XXXX XXXX2
XX16
X: Indeterminate
Blank spaces are reserved. No access is allowed.
Rev. 1.10 Oct. 18, 2005
REJ09B0162-0110
Page 27 of 435
XX16
0016
0016
0016
0016
0016
0000 0XXX2
4. Special Function Registers (SFRs)
M32C/88 Group (M32C/88T)
Address
017016
017116
017216
017316
017416
017516
017616
017716
017816
017916
017A16
017B16
017C16
017D16
017E16
017F16
018016
018116
018216
018316
018416
018516
018616
018716
018816
018916
018A16
018B16
018C16
018D16
018E16
018F16
019016
019116
019216
019316
019416
019516
019616
019716
019816
019916
019A16
019B16
019C16
019D16
019E16
019F16
Register
CAN2 Slot Buffer Select Register
CAN2 Control Register 1
CAN2 Sleep Control Register
Symbol
C2SBS
C2CTLR1
C2SLPR
Value after RESET
0016(1)
X000 00XX2(1)
XXXX XXX02
CAN2 Acceptance Filter Support Register
C2AFS
0016(1)
0116(1)
Input Function Select Register
Input Function Select Register A
IPS
IPSA
0016
0016
CAN2 Message Slot Buffer 0 Standard ID0
CAN2 Message Slot Buffer 0 Standard ID1
CAN2 Message Slot Buffer 0 Extended ID0
CAN2 Message Slot Buffer 0 Extended ID1
CAN2 Message Slot Buffer 0 Extended ID2
CAN2 Message Slot Buffer 0 Data Length Code
CAN2 Message Slot Buffer 0 Data 0
CAN2 Message Slot Buffer 0 Data 1
CAN2 Message Slot Buffer 0 Data 2
CAN2 Message Slot Buffer 0 Data 3
CAN2 Message Slot Buffer 0 Data 4
CAN2 Message Slot Buffer 0 Data 5
CAN2 Message Slot Buffer 0 Data 6
CAN2 Message Slot Buffer 0 Data 7
CAN2 Message Slot Buffer 0 Time Stamp High-Order
CAN2 Message Slot Buffer 0 Time Stamp Low-Order
CAN2 Message Slot Buffer 1 Standard ID0
CAN2 Message Slot Buffer 1 Standard ID1
CAN2 Message Slot Buffer 1 Extended ID0
CAN2 Message Slot Buffer 1 Extended ID1
CAN2 Message Slot Buffer 1 Extended ID2
CAN2 Message Slot Buffer 1 Data Length Code
CAN2 Message Slot Buffer 1 Data 0
CAN2 Message Slot Buffer 1 Data 1
CAN2 Message Slot Buffer 1 Data 2
CAN2 Message Slot Buffer 1 Data 3
CAN2 Message Slot Buffer 1 Data 4
CAN2 Message Slot Buffer 1 Data 5
CAN2 Message Slot Buffer 1 Data 6
CAN2 Message Slot Buffer 1 Data 7
CAN2 Message Slot Buffer 1 Time Stamp High-Order
CAN2 Message Slot Buffer 1 Time Stamp Low-Order
C2SLOT0_0
C2SLOT0_1
C2SLOT0_2
C2SLOT0_3
C2SLOT0_4
C2SLOT0_5
C2SLOT0_6
C2SLOT0_7
C2SLOT0_8
C2SLOT0_9
C2SLOT0_10
C2SLOT0_11
C2SLOT0_12
C2SLOT0_13
C2SLOT0_14
C2SLOT0_15
C2SLOT1_0
C2SLOT1_1
C2SLOT1_2
C2SLOT1_3
C2SLOT1_4
C2SLOT1_5
C2SLOT1_6
C2SLOT1_7
C2SLOT1_8
C2SLOT1_9
C2SLOT1_10
C2SLOT1_11
C2SLOT1_12
C2SLOT1_13
C2SLOT1_14
C2SLOT1_15
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
X: Indeterminate
Blank spaces are reserved. No access is allowed.
NOTE:
1. Values are obtained by setting the SLEEP bit in the C2SLPR register to "1" (sleep mode exited) after reset and
supplying a clock to the CAN module.
Rev. 1.10 Oct. 18, 2005
REJ09B0162-0110
Page 28 of 435
4. Special Function Registers (SFRs)
M32C/88 Group (M32C/88T)
Address
01A016
01A116
01A216
01A316
01A416
01A516
01A616
01A716
01A816
Register
Value after RESET
XX01 0X012(2)
CAN2 Control Register 0
C2CTLR0
XXXX 00002(2)
0000 00002(2)
CAN2 Status Register
C2STR
X000 0X012(2)
0016(2)
CAN2 Extended ID Register
C2IDR
0016(2)
0000 XXXX2(2)
CAN2 Configuration Register
C2CONR
0000 00002(2)
0016(2)
C2TSR
0016(2)
0016(2)
0016(2)
0016(2)
CAN2 Time Stamp Register
01A916
01AA16 CAN2 Transmit Error Count Register
01AB16 CAN2 Receive Error Count Register
01AC16
CAN2 Slot Interrupt Status Register
01AD16
01AE16
01AF16
01B016
CAN2 Slot Interrupt Mask Register
01B116
01B216
01B316
01B416
01B516
01B616
01B716
01B816
01B916
01BA16
01BB16
01BC16
01BD16
01BE16
01BF16
01C016
01C116
01C216
01C316
01C416
01C516
01C616
01C716
01C816
01C916
01CA16
01CB16
01CC16
01CD16
01CE16
01CF16
Symbol
C2TEC
C2REC
C2SISTR
0016(2)
0016(2)
C2SIMKR
0016(2)
CAN2 Error Interrupt Mask Register
CAN2 Error Interrupt Status Register
CAN2 Error Cause Register
CAN2 Baud Rate Prescaler
C2EIMKR
C2EISTR
C2EFR
C2BRP
XXXX X0002(2)
XXXX X0002(2)
0016(2)
0000 00012(2)
CAN2 Mode Register
C2MDR
XXXX XX002(2)
CAN2 Single Shot Control Register
C2SSCTLR
0016(2)
0016(2)
CAN2 Single Shot Status Register
C2SSSTR
0016(2)
0016(2)
(Note 1)
CAN2 Global Mask Register Standard ID0
CAN2 Global Mask Register Standard ID1
CAN2 Global Mask Register Extended ID0
CAN2 Global Mask Register Extended ID1
CAN2 Global Mask Register Extended ID2
C2GMR0
C2GMR1
C2GMR2
C2GMR3
C2GMR4
00002(2)
XXX0
XX00 00002(2)
XXXX 00002(2)
0016(2)
XX00 00002(2)
X: Indeterminate
Blank spaces are reserved. No access is allowed.
NOTES:
1. The BANKSEL bit in the C2CTLR1 register switches functions for addresses 01C016 to 01DF16.
2. Values are obtained by setting the SLEEP bit in the C2SLPR register to "1" (sleep mode exited) after reset and
supplying a clock to the CAN module.
Rev. 1.10 Oct. 18, 2005
REJ09B0162-0110
Page 29 of 435
M32C/88 Group (M32C/88T)
Address
4. Special Function Registers (SFRs)
Register
CAN2 Message Slot 0 Control Register /
Symbol
C2MCTL0/
Value after RESET
0000 00002(2)
CAN2 Local Mask Register A Standard ID0
CAN2 Message Slot 1 Control Register /
C2LMAR0
C2MCTL1/
XXX0 00002(2)
0000 00002(2)
CAN2 Local Mask Register A Standard ID1
CAN2 Message Slot 2 Control Register /
C2LMAR1
C2MCTL2/
XX00 00002(2)
0000 00002(2)
CAN2 Local Mask Register A Extended ID0
CAN2 Message Slot 3 Control Register /
C2LMAR2
C2MCTL3/
XXXX 00002(2)
0016(2)
CAN2 local Mask Register A Extended ID1
CAN2 Message Slot 4 Control Register /
C2LMAR3
C2MCTL4/
0016(2)
0000 00002(2)
CAN2 Local Mask Register A Extended ID2
CAN2 Message Slot 5 Control Register
CAN2 Message Slot 6 Control Register
CAN2 Message Slot 7 Control Register
CAN2 Message Slot 8 Control Register /
C2LMAR4
C2MCTL5
C2MCTL6
C2MCTL7
C2MCTL8/
XX00 00002(2)
0016(2)
0016(2)
0016(2)
0000 00002(2)
CAN2 Local Mask Register B Standard ID0
CAN2 Message Slot 9 Control Register /
C2LMBR0
C2MCTL9/
XXX0 00002(2)
0000 00002(2)
CAN2 Local Mask Register B Standard ID1
CAN2 Message Slot 10 Control Register /
C2LMBR1
C2MCTL10/
XX00 00002(2)
0000 00002(2)
CAN2 Local Mask Register B Extended ID2
CAN2 Message Slot 11 Control Register /
C2LMBR2
C2MCTL11/
XXXX 00002(2)
0016(2)
CAN2 Local Mask Register B Extended ID3
CAN2 Message Slot 12 Control Register /
C2LMBR3
C2MCTL12/
0016(2)
0000 00002(2)
CAN2 Local Mask Register B Extended ID4
01DD16 CAN2 Message Slot 13 Control Register
01DE16 CAN2 Message Slot 14 Control Register
01DF16 CAN2 Message Slot 15 Control Register
C2LMBR4
C2MCTL13
C2MCTL14
C2MCTL15
XX00 00002(2)
0016(2)
0016(2)
0016(2)
01D016
01D116
01D216
01D316
01D416
01D516
01D616
01D716
01D816
01D916
01DA16
01DB16
01DC16
(Note 1)
X: Indeterminate
Blank spaces are reserved. No access is allowed.
NOTES:
1. The BANKSEL bit in the C2CTLR1 register switches functions for addresses 01C016 to 01DF16.
2. Values are obtained by setting the SLEEP bit in the C2SLPR register to "1" (sleep mode exited) after reset and
supplying a clock to the CAN module.
Rev. 1.10 Oct. 18, 2005
REJ09B0162-0110
Page 30 of 435
M32C/88 Group (M32C/88T)
4. Special Function Registers (SFRs)
Address
01E016
01E116
01E216
01E316
01E416
01E516
01E616
01E716
01E816
01E916
01EA16
01EB16
01EC16
01ED16
01EE16
01EF16
01F016
01F116
Register
CAN0 Message Slot Buffer 0 Standard ID0
CAN0 Message Slot Buffer 0 Standard ID1
CAN0 Message Slot Buffer 0 Extended ID0
CAN0 Message Slot Buffer 0 Extended ID1
CAN0 Message Slot Buffer 0 Extended ID2
CAN0 Message Slot Buffer 0 Data Length Code
CAN0 Message Slot Buffer 0 Data 0
CAN0 Message Slot Buffer 0 Data 1
CAN0 Message Slot Buffer 0 Data 2
CAN0 Message Slot Buffer 0 Data 3
CAN0 Message Slot Buffer 0 Data 4
CAN0 Message Slot Buffer 0 Data 5
CAN0 Message Slot Buffer 0 Data 6
CAN0 Message Slot Buffer 0 Data 7
CAN0 Message Slot Buffer 0 Time Stamp High-Order
CAN0 Message Slot Buffer 0 Time Stamp Low-Order
CAN0 Message Slot Buffer 1 Standard ID0
CAN0 Message Slot Buffer 1 Standard ID1
Symbol
C0SLOT0_0
C0SLOT0_1
C0SLOT0_2
C0SLOT0_3
C0SLOT0_4
C0SLOT0_5
C0SLOT0_6
C0SLOT0_7
C0SLOT0_8
C0SLOT0_9
C0SLOT0_10
C0SLOT0_11
C0SLOT0_12
C0SLOT0_13
C0SLOT0_14
C0SLOT0_15
C0SLOT1_0
C0SLOT1_1
Value after RESET
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
01F216
01F316
01F416
01F516
01F616
01F716
01F816
01F916
01FA16
01FB16
01FC16
01FD16
01FE16
01FF16
020016
CAN0 Message Slot Buffer 1 Extended ID0
CAN0 Message Slot Buffer 1 Extended ID1
CAN0 Message Slot Buffer 1 Extended ID2
CAN0 Message Slot Buffer 1 Data Length Code
CAN0 Message Slot Buffer 1 Data 0
CAN0 Message Slot Buffer 1 Data 1
CAN0 Message Slot Buffer 1 Data 2
CAN0 Message Slot Buffer 1 Data 3
CAN0 Message Slot Buffer 1 Data 4
CAN0 Message Slot Buffer 1 Data 5
CAN0 Message Slot Buffer 1 Data 6
CAN0 Message Slot Buffer 1 Data 7
CAN0 Message Slot Buffer 1 Time Stamp High-Order
CAN0 Message Slot Buffer 1 Time Stamp Low-Order
C0SLOT1_2
C0SLOT1_3
C0SLOT1_4
C0SLOT1_5
C0SLOT1_6
C0SLOT1_7
C0SLOT1_8
C0SLOT1_9
C0SLOT1_10
C0SLOT1_11
C0SLOT1_12
C0SLOT1_13
C0SLOT1_14
C0SLOT1_15
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX01 0X012(1)
CAN0 Control Register 0
C0CTLR0
XXXX 00002(1)
0000 00002(1)
CAN0 Status Register
C0STR
X000 0X012(1)
0016(1)
CAN0 Extended ID Register
C0IDR
0016(1)
0000 XXXX2(1)
CAN0 Configuration Register
C0CONR
0000 00002(1)
0016(1)
CAN0 Time Stamp Register
C0TSR
CAN0 Transmit Error Count Register
CAN0 Receive Error Count Register
C0TEC
C0REC
0016(1)
0016(1)
0016(1)
0016(1)
CAN0 Slot Interrupt Status Register
C0SISTR
020116
020216
020316
020416
020516
020616
020716
020816
020916
020A16
020B16
020C16
020D16
020E16
020F16
0016(1)
X: Indeterminate
Blank spaces are reserved. No access is allowed.
NOTE:
1. Values are obtained by setting the SLEEP bit in the C0SLPR register to "1" (sleep mode exited) after reset and
supplying a clock to the CAN module.
Rev. 1.10 Oct. 18, 2005
REJ09B0162-0110
Page 31 of 435
4. Special Function Registers (SFRs)
M32C/88 Group (M32C/88T)
Address
021016
021116
021216
021316
021416
021516
021616
021716
021816
021916
021A16
021B16
021C16
021D16
021E16
021F16
022016
022116
022216
022316
022416
022516
022616
022716
022816
022916
022A16
022B16
022C16
022D16
022E16
022F16
023016
023116
023216
023316
023416
023516
023616
023716
023816
023916
Register
Symbol
Value after RESET
0016(2)
CAN0 Slot Interrupt Mask Register
C0SIMKR
0016(2)
CAN0 Error Interrupt Mask Register
CAN0 Error Interrupt Status Register
CAN0 Error Cause Register
CAN0 Baud Rate Prescaler
C0EIMKR
C0EISTR
C0EFR
C0BRP
XXXX X0002(2)
XXXX X0002(2)
0016(2)
0000 00012(2)
CAN0 Mode Register
C0MDR
XXXX XX002(2)
CAN0 Single Shot Control Register
C0SSCTLR
0016(2)
0016(2)
CAN0 Single Shot Status Register
C0SSSTR
0016(2)
0016(2)
CAN0 Global Mask Register Standard ID0
CAN0 Global Mask Register Standard ID1
CAN0 Global Mask Register Extended ID0
CAN0 Global Mask Register Extended ID1
CAN0 Global Mask Register Extended ID2
C0GMR0
C0GMR1
C0GMR2
C0GMR3
C0GMR4
XXX0 00002(2)
XX00 00002(2)
XXXX 00002(2)
0016(2)
XX00 00002(2)
CAN0 Message Slot 0 Control Register /
C0MCTL0/
0000 00002(2)
(Note 1)
00002(2)
CAN0 Local Mask Register A Standard ID0
CAN0 Message Slot 1 Control Register /
C0LMAR0
C0MCTL1/
XXX0
0000 00002(2)
CAN0 Local Mask Register A Standard ID1
CAN0 Message Slot 2 Control Register /
C0LMAR1
C0MCTL2/
XX00 00002(2)
0000 00002(2)
CAN0 Local Mask Register A Extended ID0
CAN0 Message Slot 3 Control Register /
C0LMAR2
C0MCTL3/
XXXX 00002(2)
0016(2)
CAN0 local Mask Register A Extended ID1
CAN0 Message Slot 4 Control Register /
C0LMAR3
C0MCTL4/
0016(2)
0000 00002(2)
CAN0 Local Mask Register A Extended ID2
CAN0 Message Slot 5 Control Register
CAN0 Message Slot 6 Control Register
CAN0 Message Slot 7 Control Register
CAN0 Message Slot 8 Control Register /
C0LMAR4
C0MCTL5
C0MCTL6
C0MCTL7
C0MCTL8/
XX00 00002(2)
0016(2)
0016(2)
0016(2)
0000 00002(2)
CAN0 Local Mask Register B Standard ID0
CAN0 Message Slot 9 Control Register /
C0LMBR0
C0MCTL9/
XXX0 00002(2)
0000 00002(2)
CAN0 Local Mask Register B Standard ID1
C0LMBR1
XX00 00002(2)
X: Indeterminate
Blank spaces are reserved. No access is allowed.
NOTES:
1. The BANKSEL bit in the C0CTLR1 register switches functions for addresses 022016 to 023F16.
2. Values are obtained by setting the SLEEP bit in the C0SLPR register to "1" (sleep mode exited) after reset and
supplying a clock to the CAN module.
Rev. 1.10 Oct. 18, 2005
REJ09B0162-0110
Page 32 of 435
M32C/88 Group (M32C/88T)
Address
023A16
023B16
023C16
023D16
023E16
023F16
024016
024116
024216
024316
024416
024516
024616
024716
024816
024916
024A16
024B16
024C16
024D16
024E16
024F16
025016
025116
025216
025316
025416
025516
025616
025716
025816
025916
025A16
025B16
025C16
025D16
025E16
025F16
4. Special Function Registers (SFRs)
Register
CAN0 Message Slot 10 Control Register /
Symbol
C0MCTL10/
Value after RESET
0000 00002(2)
CAN0 Local Mask Register B Extended ID0
CAN0 Message Slot 11 Control Register /
C0LMBR2
C0MCTL11/
XXXX 00002(2)
0016(2)
CAN0 Local Mask Register B Extended ID1
CAN0 Message Slot 12 Control Register /
C0LMBR3
C0MCTL12/
0016(2)
0000 00002(2)
CAN0 Local Mask Register B Extended ID2
CAN0 Message Slot 13 Control Register
CAN0 Message Slot 14 Control Register
CAN0 Message Slot 15 Control Register
CAN0 Slot Buffer Select Register
CAN0 Control Register 1
CAN0 Sleep Control Register
C0LMBR4
C0MCTL13
C0MCTL14
C0MCTL15
C0SBS
C0CTLR1
C0SLPR
XX00 00002(2)
0016(2)
0016(2)
0016(2)
0016(2)
X000 00XX2(2)
XXXX XXX02
CAN0 Acceptance Filter Support Register
C0AFS
0016(2)
0116(2)
CAN1 Slot Buffer Select Register
CAN1 Control Register 1
CAN1 Sleep Control Register
C1SBS
C1CTLR1
C1SLPR
0016(3)
X000 00XX2(3)
XXXX XXX02(3)
CAN1 Acceptance Filter Support Register
C1AFS
0016(3)
0116(3)
(Note 1)
X: Indeterminate
Blank spaces are reserved. No access is allowed.
NOTES:
1. The BANKSEL bit in the C0CTLR1 register switches functions for addresses 022016 to 023F16.
2. Values are obtained by setting the SLEEP bit in the C0SLPR register to "1" (sleep mode exited) after reset and
supplying a clock to the CAN module.
3. Values are obtained by setting the SLEEP bit in the C1SLPR register to "1" (sleep mode exited) after reset and
supplying a clock to the CAN module.
Rev. 1.10 Oct. 18, 2005
REJ09B0162-0110
Page 33 of 435
M32C/88 Group (M32C/88T)
Address
026016
026116
026216
026316
026416
026516
026616
026716
026816
026916
026A16
026B16
026C16
026D16
026E16
026F16
027016
027116
027216
027316
027416
027516
027616
027716
027816
027916
027A16
027B16
027C16
027D16
027E16
027F16
028016
028116
028216
028316
028416
028516
028616
028716
028816
028916
028A16
028B16
028C16
028D16
028E16
028F16
4. Special Function Registers (SFRs)
Register
CAN1 Message Slot Buffer 0 Standard ID0
CAN1 Message Slot Buffer 0 Standard ID1
CAN1 Message Slot Buffer 0 Extended ID0
CAN1 Message Slot Buffer 0 Extended ID1
CAN1 Message Slot Buffer 0 Extended ID2
CAN1 Message Slot Buffer 0 Data Length Code
CAN1 Message Slot Buffer 0 Data 0
CAN1 Message Slot Buffer 0 Data 1
CAN1 Message Slot Buffer 0 Data 2
CAN1 Message Slot Buffer 0 Data 3
CAN1 Message Slot Buffer 0 Data 4
CAN1 Message Slot Buffer 0 Data 5
CAN1 Message Slot Buffer 0 Data 6
CAN1 Message Slot Buffer 0 Data 7
CAN1 Message Slot Buffer 0 Time Stamp High-Order
CAN1 Message Slot Buffer 0 Time Stamp Low-Order
CAN1 Message Slot Buffer 1 Standard ID0
CAN1 Message Slot Buffer 1 Standard ID1
CAN1 Message Slot Buffer 1 Extended ID0
CAN1 Message Slot Buffer 1 Extended ID1
CAN1 Message Slot Buffer 1 Extended ID2
CAN1 Message Slot Buffer 1 Data Length Code
CAN1 Message Slot Buffer 1 Data 0
CAN1 Message Slot Buffer 1 Data 1
CAN1 Message Slot Buffer 1 Data 2
CAN1 Message Slot Buffer 1 Data 3
CAN1 Message Slot Buffer 1 Data 4
CAN1 Message Slot Buffer 1 Data 5
CAN1 Message Slot Buffer 1 Data 6
CAN1 Message Slot Buffer 1 Data 7
CAN1 Message Slot Buffer 1 Time Stamp High-Order
CAN1 Message Slot Buffer 1 Time Stamp Low-Order
Symbol
C1SLOT0_0
C1SLOT0_1
C1SLOT0_2
C1SLOT0_3
C1SLOT0_4
C1SLOT0_5
C1SLOT0_6
C1SLOT0_7
C1SLOT0_8
C1SLOT0_9
C1SLOT0_10
C1SLOT0_11
C1SLOT0_12
C1SLOT0_13
C1SLOT0_14
C1SLOT0_15
C1SLOT1_0
C1SLOT1_1
C1SLOT1_2
C1SLOT1_3
C1SLOT1_4
C1SLOT1_5
C1SLOT1_6
C1SLOT1_7
C1SLOT1_8
C1SLOT1_9
C1SLOT1_10
C1SLOT1_11
C1SLOT1_12
C1SLOT1_13
C1SLOT1_14
C1SLOT1_15
Value after RESET
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX01 0X012(1)
CAN1 Control Register 0
C1CTLR0
XXXX 00002(1)
0000 00002(1)
CAN1 Status Register
C1STR
X000 0X012(1)
0016(1)
CAN1 Extended ID Register
C1IDR
0016(1)
0000 XXXX2(1)
CAN1 Configuration Register
C1CONR
0000 00002(1)
0016(1)
CAN1 Time Stamp Register
C1TSR
CAN1 Transmit Error Count Register
CAN1 Receive Error Count Register
C1TEC
C1REC
0016(1)
0016(1)
0016(1)
0016(1)
CAN1 Slot Interrupt Status Register
C1SISTR
0016(1)
X: Indeterminate
Blank spaces are reserved. No access is allowed.
NOTE:
1. Values are obtained by setting the SLEEP bit in the C1SLPR register to "1" (sleep mode exited) after reset and
supplying the clock to the CAN module.
Rev. 1.10 Oct. 18, 2005
REJ09B0162-0110
Page 34 of 435
4. Special Function Registers (SFRs)
M32C/88 Group (M32C/88T)
Address
029016
029116
029216
029316
029416
029516
029616
029716
029816
029916
029A16
029B16
029C16
029D16
029E16
029F16
02A016
02A116
02A216
02A316
02A416
02A516
02A616
02A716
02A816
02A916
02AA16
02AB16
02AC16
02AD16
02AE16
02AF16
02B016
02B116
02B216
02B316
02B416
02B516
02B616
02B716
02B816
02B916
Register
Symbol
Value after RESET
0016(2)
CAN1 Slot Interrupt Mask Register
C1SIMKR
0016(2)
CAN1 Error Interrupt Mask Register
CAN1 Error Interrupt Status Register
CAN1 Error Factor Register
CAN1 Baud Rate Prescaler
C1EIMKR
C1EISTR
C1EFR
C1BRP
XXXX X0002(2)
XXXX X0002(2)
0016(2)
0000 00012(2)
CAN1 Mode Register
C1MDR
XXXX XX002(2)
CAN1 Single Shot Control Register
C1SSCTLR
0016(2)
0016(2)
CAN1 Single Shot Status Register
C1SSSTR
0016(2)
0016(2)
CAN1 Global Mask Register Standard ID0
CAN1 Global Mask Register Standard ID1
CAN1 Global Mask Register Extended ID0
CAN1 Global Mask Register Extended ID1
CAN1 Global Mask Register Extended ID2
C1GMR0
C1GMR1
C1GMR2
C1GMR3
C1GMR4
XXX0 00002(2)
XX00 00002(2)
XXXX 00002(2)
0016(2)
XX00 00002(2)
CAN1 Message Slot 0 Control Register /
C1MCTL0/
0000 00002(2)
(Note 1)
00002(2)
CAN1 Local Mask Register A Standard ID0
CAN1 Message Slot 1 Control Register /
C1LMAR0
C1MCTL1/
XXX0
0000 00002(2)
CAN1 Local Mask Register A Standard ID1
CAN1 Message Slot 2 Control Register /
C1LMAR1
C1MCTL2/
XX00 00002(2)
0000 00002(2)
CAN1 Local Mask Register A Extended ID0
CAN1 Message Slot 3 Control Register /
C1LMAR2
C1MCTL3/
XXXX 00002(2)
0016(2)
CAN1 Local Mask Register A Extended ID1
CAN1 Message Slot 4 Control Register /
C1LMAR3
C1MCTL4/
0016(2)
0000 00002(2)
CAN1 Local Mask Register A Extended ID2
CAN1 Message Slot 5 Control Register
CAN1 Message Slot 6 Control Register
CAN1 Message Slot 7 Control Register
CAN1 Message Slot 8 Control Register /
C1LMAR4
C1MCTL5
C1MCTL6
C1MCTL7
C1MCTL8/
XX00 00002(2)
0016(2)
0016(2)
0016(2)
0000 00002(2)
CAN1 Local Mask Register B Standard ID0
CAN1 Message Slot 9 Control Register /
C1LMBR0
C1MCTL9/
XXX0 00002(2)
0000 00002(2)
CAN1 Local Mask Register B Standard ID1
C1LMBR1
XX00 00002(2)
X: Indeterminate
Blank spaces are reserved. No access is allowed.
NOTES:
1. The BANKSEL bit in the C1CTLR1 register switches functions for addresses 02A016 to 02BF16.
2. Values are obtained by setting the SLEEP bit in the C1SLPR register to "1" (sleep mode exited) after reset and
supplying a clock to the CAN module.
Rev. 1.10 Oct. 18, 2005
REJ09B0162-0110
Page 35 of 435
M32C/88 Group (M32C/88T)
Address
4. Special Function Registers (SFRs)
Register
CAN1 Message Slot 10 Control Register /
Symbol
C1MCTL10/
Value after RESET
0000 00002(2)
CAN1 Local Mask Register B Extended ID0
CAN1 Message Slot 11 Control Register /
C1LMBR2
C1MCTL11/
XXXX 00002(2)
0016(2)
CAN1 Local Mask Register B Extended ID1
CAN1 Message Slot 12 Control Register /
C1LMBR3
C1MCTL12/
0016(2)
0000 00002(2)
CAN1 Local Mask Register B Extended ID2
02BD16 CAN1 Message Slot 13 Control Register
02BE16 CAN1 Message Slot 14 Control Register
02BF16 CAN1 Message Slot 15 Control Register
02C016
X0 Register Y0 Register
02C116
02C216
X1 Register Y1 Register
02C316
02C416
X2 Register Y2 Register
02C516
02C616
X3 Register Y3 Register
02C716
02C816
X4 Register Y4 Register
02C916
02CA16
X5 Register Y5 Register
02CB16
02CC16
X6 Register Y6 Register
02CD16
02CE16
X7 Register Y7 Register
02CF16
02D016
X8 Register Y8 Register
02D116
02D216
X9 Register Y9 Register
02D316
02D416
X10 Register Y10 Register
02D516
02D616
X11 Register Y11 Register
02D716
02D816
X12 Register Y12 Register
02D916
02DA16
X13 Register Y13 Register
02DB16
02DC16
X14 Register Y14 Register
02DD16
02DE16
X15 Register Y15 Register
02DF16
C1LMBR4
C1MCTL13
C1MCTL14
C1MCTL15
XX00 00002(2)
0016(2)
0016(2)
0016(2)
XX16
02BA16
02BB16
02BC16
X0R,Y0R
X1R,Y1R
X2R,Y2R
X3R,Y3R
X4R,Y4R
X5R,Y5R
X6R,Y6R
X7R,Y7R
X8R,Y8R
X9R,Y9R
X10R,Y10R
X11R,Y11R
X12R,Y12R
X13R,Y13R
X14R,Y14R
X15R,Y15R
(Note 1)
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
X: Indeterminate
Blank spaces are reserved. No access is allowed.
NOTES:
1. The BANKSEL bit in the C1CTLR1 register switches functions for addresses 02A016 to 02BF16.
2. Values are obtained by setting the SLEEP bit in the C1SLPR register to "1" (sleep mode exited) after reset and
supplying a clock to the CAN module.
Rev. 1.10 Oct. 18, 2005
REJ09B0162-0110
Page 36 of 435
4. Special Function Registers (SFRs)
M32C/88 Group (M32C/88T)
Address
02E016
02E116
02E216
02E316
02E416
02E516
02E616
02E716
02E816
02E916
02EA16
X/Y Control Register
Register
Symbol
XYC
Value after RESET
XXXX XX002
UART1 Special Mode Register 4
UART1 Special Mode Register 3
UART1 Special Mode Register 2
UART1 Special Mode Register
UART1 Transmit/Receive Mode Register
UART1 Bit Rate Register
U1SMR4
U1SMR3
U1SMR2
U1SMR
U1MR
U1BRG
0016
0016
0016
0016
0016
XX16
XX16
UART1 Transmit Buffer Register
02EB16
02EC16 UART1 Transmit/Receive Control Register 0
02ED16 UART1 Transmit/Receive Control Register 1
02EE16
UART1 Receive Buffer Register
02EF16
02F016
02F116
02F216
02F316
02F416 UART4 Special Mode Register 4
02F516 UART4 Special Mode Register 3
02F616 UART4 Special Mode Register 2
02F716 UART4 Special Mode Register
02F816 UART4 Transmit/Receive Mode Register
02F916 UART4 Bit Rate Register
02FA16
UART4 Transmit Buffer Register
02FB16
02FC16 UART4 Transmit/Receive Control Register 0
02FD16 UART4 Transmit/Receive Control Register 1
02FE16
UART4 Receive Buffer Register
02FF16
030016 Timer B3, B4, B5 Count Start Flag
030116
030216
Timer A1-1 Register
030316
030416
Timer A2-1 Register
030516
030616
Timer A4-1 Register
030716
030816 Three-Phase PWM Control Register 0
030916 Three-Phase PWM Control Register 1
030A16 Three-Phase Output Buffer Register 0
030B16 Three-Phase Output Buffer Register 1
030C16 Dead Time Timer
030D16 Timer B2 Interrupt Generation Frequency Set Counter
030E16
030F16
X: Indeterminate
Blank spaces are reserved. No access is allowed.
Rev. 1.10 Oct. 18, 2005
REJ09B0162-0110
Page 37 of 435
U1TB
U1C0
U1C1
U1RB
U4SMR4
U4SMR3
U4SMR2
U4SMR
U4MR
U4BRG
U4TB
U4C0
U4C1
U4RB
TBSR
XX16
0000 10002
0000 00102
XX16
XX16
0016
0016
0016
0016
0016
XX16
XX16
XX16
0000 10002
0000 00102
XX16
XX16
000X XXXX2
XX16
TA11
TA21
TA41
INVC0
INVC1
IDB0
IDB1
DTT
ICTB2
XX16
XX16
XX16
XX16
XX16
0016
0016
XX11 11112
XX11 11112
XX16
XX16
4. Special Function Registers (SFRs)
M32C/88 Group (M32C/88T)
Address
031016
031116
031216
031316
031416
031516
031616
031716
031816
031916
031A16
031B16
031C16
031D16
031E16
031F16
032016
032116
032216
032316
032416
032516
032616
032716
032816
032916
032A16
032B16
032C16
032D16
032E16
032F16
033016
033116
033216
033316
033416
033516
033616
033716
033816
033916
033A16
033B16
033C16
033D16
033E16
033F16
Register
Symbol
Value after RESET
XX16
Timer B3 Register
TB3
Timer B4 Register
TB4
Timer B5 Register
TB5
Timer B3 Mode Register
Timer B4 Mode Register
Timer B5 Mode Register
TB3MR
TB4MR
TB5MR
00XX 00002
00XX 00002
00XX 00002
External Interrupt Request Source Select Register
IFSR
0016
UART3 Special Mode Register 4
UART3 Special Mode Register 3
UART3 Special Mode Register 2
UART3 Special Mode Register
UART3 Transmit/Receive Mode Register
UART3 Bit Rate Register
U3SMR4
U3SMR3
U3SMR2
U3SMR
U3MR
U3BRG
UART3 Transmit Buffer Register
U3TB
UART3 Transmit/Receive Control Register 0
UART3 Transmit/Receive Control Register 1
U3C0
U3C1
UART3 Receive Buffer Register
U3RB
0016
0016
0016
0016
0016
XX16
XX16
XX16
0000 10002
0000 00102
XX16
XX16
UART2 Special Mode Register 4
UART2 Special Mode Register 3
UART2 Special Mode Register 2
UART2 Special Mode Register
UART2 Transmit/Receive Mode Register
UART2 Bit Rate Register
U2SMR4
U2SMR3
U2SMR2
U2SMR
U2MR
U2BRG
UART2 Transmit Buffer Register
U2TB
UART2 Transmit/Receive Control Register 0
UART2 Transmit/Receive Control Register 1
U2C0
U2C1
UART2 Receive Buffer Register
U2RB
X: Indeterminate
Blank spaces are reserved. No access is allowed.
Rev. 1.10 Oct. 18, 2005
REJ09B0162-0110
Page 38 of 435
XX16
XX16
XX16
XX16
XX16
0016
0016
0016
0016
0016
XX16
XX16
XX16
0000 10002
0000 00102
XX16
XX16
4. Special Function Registers (SFRs)
M32C/88 Group (M32C/88T)
Address
034016
034116
034216
034316
034416
034516
034616
034716
034816
034916
034A16
034B16
034C16
034D16
034E16
034F16
035016
035116
035216
035316
035416
035516
035616
035716
035816
035916
035A16
035B16
035C16
035D16
035E16
035F16
036016
036116
036216
036316
036416
036516
036616
036716
036816
036916
036A16
036B16
036C16
036D16
036E16
036F16
Register
Count Start Flag
Clock Prescaler Reset Flag
One-Shot Start Flag
Trigger Select Register
Up/Down Flag
Symbol
TABSR
CPSRF
ONSF
TRGSR
UDF
Timer A0 Register
TA0
Timer A1 Register
TA1
Timer A2 Register
TA2
Timer A3 Register
TA3
Timer A4 Register
TA4
Timer B0 Register
TB0
Timer B1 Register
TB1
Timer B2 Register
TB2
Timer A0 Mode Register
Timer A1 Mode Register
Timer A2 Mode Register
Timer A3 Mode Register
Timer A4 Mode Register
Timer B0 Mode Register
Timer B1 Mode Register
Timer B2 Mode Register
Timer B2 Special Mode Register
Count Source Prescaler Register(1)
TA0MR
TA1MR
TA2MR
TA3MR
TA4MR
TB0MR
TB1MR
TB2MR
TB2SC
TCSPR
UART0 Special Mode Register 4
UART0 Special Mode Register 3
UART0 Special Mode Register 2
UART0 Special Mode Register
UART0 Transmit/Receive Mode Register
UART0 Bit Rate Register
U0SMR4
U0SMR3
U0SMR2
U0SMR
U0MR
U0BRG
UART0 Transmit Buffer Register
U0TB
UART0 Transmit/Receive Control Register 0
UART0 Transmit/Receive Control Register 1
U0C0
U0C1
UART0 Receive Buffer Register
U0RB
Value after RESET
0016
0XXX XXXX2
0016
0016
0016
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
0016
0016
0016
0016
0016
00XX 00002
00XX 00002
00XX 00002
XXXX XXX02
0XXX 00002
0016
0016
0016
0016
0016
XX16
XX16
XX16
0000 10002
0000 00102
XX16
XX16
X: Indeterminate
Blank spaces are reserved. No access is allowed.
NOTE:
1. The TCSPR register maintains values set before reset, even after software reset or watchdog timer reset has
been performed.
Rev. 1.10 Oct. 18, 2005
REJ09B0162-0110
Page 39 of 435
4. Special Function Registers (SFRs)
M32C/88 Group (M32C/88T)
Address
037016
037116
037216
037316
037416
037516
037616
037716
037816
037916
037A16
037B16
037C16
037D16
037E16
037F16
038016
038116
038216
038316
038416
038516
038616
038716
038816
038916
038A16
038B16
038C16
038D16
038E16
038F16
039016
039116
039216
039316
039416
039516
039616
039716
039816
039916
039A16
039B16
039C16
039D16
039E16
039F16
Register
Symbol
Value after RESET
DMA0 Request Source Select Register
DMA1 Request Source Select Register
DMA2 Request Source Select Register
DMA3 Request Source Select Register
DM0SL
DM1SL
DM2SL
DM3SL
CRC Data Register
CRCD
CRC Input Register
CRCIN
A/D0 Register 0
AD00
A/D0 Register 1
AD01
A/D0 Register 2
AD02
A/D0 Register 3
AD03
A/D0 Register 4
AD04
A/D0 Register 5
AD05
A/D0 Register 6
AD06
A/D0 Register 7
AD07
A/D0 Control Register 4
AD0CON4
XXXX 00XX2
A/D0 Control Register 2
A/D0 Control Register 3
A/D0 Control Register 0
A/D0 Control Register 1
D/A Register 0
AD0CON2
AD0CON3
AD0CON0
AD0CON1
DA0
XX0X X0002
XXXX X0002
0016
0016
XX16
D/A Register 1
DA1
XX16
D/A Control Register
DACON
XXXX XX002
X: Indeterminate
Blank spaces are reserved. No access is allowed.
Rev. 1.10 Oct. 18, 2005
REJ09B0162-0110
Page 40 of 435
0X00 00002
0X00 00002
0X00 00002
0X00 00002
XX16
XX16
XX16
XXXX XXXX2
0000 00002
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
XX16
4. Special Function Registers (SFRs)
M32C/88 Group (M32C/88T)
<144-pin package>
Address
03A016
03A116
03A216
03A316
03A416
03A516
03A616
03A716
03A816
03A916
03AA16
03AB16
03AC16
03AD16
03AE16
03AF16
03B016
03B116
03B216
Register
Function Select Register A8
Function Select Register A9
Symbol
PS8
PS9
Value after RESET
X000 00002
0016
Function Select Register D1
PSD1
X0XX XX002
Function Select Register C2
Function Select Register C3
PSC2
PSC3
XXXX X00X2
X0XX XXXX2
Function Select Register C
Function Select Register A0
Function Select Register A1
Function Select Register B0
PSC
PS0
PS1
PSL0
00X0 00002
0016
0016
0016
03B316
03B416
03B516
03B616
03B716
03B816
03B916
03BA16
03BB16
03BC16
03BD16
03BE16
03BF16
03C016
03C116
03C216
03C316
03C416
03C516
03C616
03C716
03C816
03C916
03CA16
03CB16
03CC16
03CD16
03CE16
03CF16
Function Select Register B1
Function Select Register A2
Function Select Register A3
Function Select Register B2
Function Select Register B3
PSL1
PS2
PS3
PSL2
PSL3
0016
00X0 00002
0016
00X0 00002
0016
Function Select Register A5
PS5
XXX0 00002
Port P6 Register
Port P7 Register
Port P6 Direction Register
Port P7 Direction Register
Port P8 Register
Port P9 Register
Port P8 Direction Register
Port P9 Direction Register
Port P10 Register
Port P11 Register
Port P10 Direction Register
Port P11 Direction Register
Port P12 Register
Port P13 Register
Port P12 Direction Register
Port P13 Direction Register
P6
P7
PD6
PD7
P8
P9
PD8
PD9
P10
P11
PD10
PD11
P12
P13
PD12
PD13
XX16
XX16
0016
0016
XX16
XX16
00X0 00002
0016
XX16
XX16
0016
XXX0 00002
XX16
XX16
0016
0016
X: Indeterminate
Blank spaces are reserved. No access is allowed.
Rev. 1.10 Oct. 18, 2005
REJ09B0162-0110
Page 41 of 435
4. Special Function Registers (SFRs)
M32C/88 Group (M32C/88T)
<144-pin package>
Address
03D016
03D116
03D216
03D316
03D416
03D516
03D616
03D716
03D816
03D916
03DA16
03DB16
03DC16
03DD16
03DE16
03DF16
03E016
03E116
03E216
03E316
03E416
03E516
03E616
03E716
03E816
03E916
03EA16
03EB16
03EC16
03ED16
03EE16
03EF16
03F016
03F116
03F216
03F316
03F416
03F516
03F616
03F716
03F816
03F916
03FA16
03FB16
03FC16
03FD16
03FE16
03FF16
Register
Port P14 Register
Port P15 Register
Port P14 Direction Register
Port P15 Direction Register
Symbol
P14
P15
PD14
PD15
Value after RESET
XX16
XX16
X000 00002
0016
Pull-Up Control Register 2
Pull-Up Control Register 3
Pull-Up Control Register 4
PUR2
PUR3
PUR4
0016
0016
XXXX 00002
Port P0 Register
Port P1 Register
Port P0 Direction Register
Port P1 Direction Register
Port P2 Register
Port P3 Register
Port P2 Direction Register
Port P3 Direction Register
Port P4 Register
Port P5 Register
Port P4 Direction Register
Port P5 Direction Register
P0
P1
PD0
PD1
P2
P3
PD2
PD3
P4
P5
PD4
PD5
XX16
XX16
0016
0016
XX16
XX16
0016
0016
XX16
XX16
0016
0016
Pull-Up Control Register 0
Pull-Up Control Register 1
PUR0
PUR1
0016
XXXX 00002
Port Control Register
PCR
XXXX XXX02
X: Indeterminate
Blank spaces are reserved. No access is allowed.
Rev. 1.10 Oct. 18, 2005
REJ09B0162-0110
Page 42 of 435
4. Special Function Registers (SFRs)
M32C/88 Group (M32C/88T)
<100-pin package>
Address
03A016
03A116
03A216
03A316
03A416
03A516
03A616
03A716
03A816
03A916
03AA16
03AB16
03AC16
03AD16
03AE16
03AF16
03B016
03B116
03B216
03B316
03B416
03B516
03B616
03B716
03B816
03B916
03BA16
03BB16
03BC16
03BD16
03BE16
03BF16
03C016
03C116
03C216
03C316
03C416
03C516
03C616
03C716
03C816
03C916
03CA16
03CB16
03CC16
03CD16
03CE16
03CF16
Register
Symbol
Value after RESET
Function Select Register D1
PSD1
X0XX XX002
Function Select Register C2
Function Select Register C3
PSC2
PSC3
XXXX X00X2
X0XX XXXX2
Function Select Register C
Function Select Register A0
Function Select Register A1
Function Select Register B0
Function Select Register B1
Function Select Register A2
Function Select Register A3
Function Select Register B2
Function Select Register B3
PSC
PS0
PS1
PSL0
PSL1
PS2
PS3
PSL2
PSL3
00X0 00002
0016
0016
0016
0016
00X0 00002
0016
00X0 00002
0016
Port P6 Register
Port P7 Register
Port P6 Direction Register
Port P7 Direction Register
Port P8 Register
Port P9 Register
Port P8 Direction Register
Port P9 Direction Register
Port P10 Register
P6
P7
PD6
PD7
P8
P9
PD8
PD9
P10
XX16
XX16
0016
0016
XX16
XX16
00X0 00002
0016
XX16
Port P10 Direction Register
Set default value to "FF16"
PD10
0016
Set default value to "FF16"
Set default value to "FF16"
X: Indeterminate
Blank spaces are reserved. No access is allowed.
Rev. 1.10 Oct. 18, 2005
REJ09B0162-0110
Page 43 of 435
4. Special Function Registers (SFRs)
M32C/88 Group (M32C/88T)
<100-pin package>
Address
03D016
03D116
03D216
03D316
03D416
03D516
03D616
03D716
03D816
03D916
03DA16
03DB16
03DC16
03DD16
03DE16
03DF16
03E016
03E116
03E216
03E316
03E416
03E516
03E616
03E716
03E816
03E916
03EA16
03EB16
03EC16
03ED16
03EE16
03EF16
03F016
03F116
03F216
03F316
03F416
03F516
03F616
03F716
03F816
03F916
03FA16
03FB16
03FC16
03FD16
03FE16
03FF16
Register
Symbol
Value after RESET
Set default value to "FF16"
Set default value to "FF16"
Pull-Up Control Register 2
Pull-Up Control Register 3
Set default value to "0016"
PUR2
PUR3
0016
0016
Port P0 Register
Port P1 Register
Port P0 Direction Register
Port P1 Direction Register
Port P2 Register
Port P3 Register
Port P2 Direction Register
Port P3 Direction Register
Port P4 Register
Port P5 Register
Port P4 Direction Register
Port P5 Direction Register
P0
P1
PD0
PD1
P2
P3
PD2
PD3
P4
P5
PD4
PD5
XX16
XX16
0016
0016
XX16
XX16
0016
0016
XX16
XX16
0016
0016
Pull-up Control Register 0
Pull-up Control Register 1
PUR0
PUR1
0016
XXXX 00002
Port Control Register
PCR
XXXX XXX02
X: Indeterminate
Blank spaces are reserved. No access is allowed.
Rev. 1.10 Oct. 18, 2005
REJ09B0162-0110
Page 44 of 435
M32C/88 Group (M32C/88T)
5. Electrical Characteristics
5. Electrical Characteristics
Table 5.1 Absolute Maximum Ratings
Symbol
Parameter
Condition
Value
Unit
VCC
Supply Voltage
VCC=AVCC
-0.3 to 6.0
V
AV CC
Analog Supply Voltage
VCC=AVCC
-0.3 to 6.0
V
VI
Input Voltage
-0.3 to VCC+0.3
V
VO
Output Voltage P00-P07, P10-P17, P20-P27, P30-P37, P40-P47,
P50-P57, P60-P67, P72-P77, P80-P84, P86, P87,
P90-P97, P100-P107, P110-P114, P120-P127,
P130-P137, P140-P146, P150-P157(1), XOUT
Pd
Power Dissipation
Topr
Operating
Ambient
Temperature
RESET, CNVSS, BYTE, P00-P07, P10-P17, P20P27, P30-P37, P40-P47, P50-P57, P60-P67, P72P77, P80-P87, P90-P97, P100-P107, P110-P114,
P120-P127, P130-P137, P140-P146, P150-P157(1),
VREF, XIN
P70, P71
-0.3 to 6.0
-0.3 to VCC+0.3
P70, P71
during CPU operation
-0.3 to 6.0
T version
Tstg
Storage Temperature
Rev. 1.10 Oct. 31, 2005 Page 45 of 57
REJ03B0171-0110
Topr=25° C
500
U version
400
T version
-40 to 85
U version
-40 to 105
during flash memory program and erase
operation
NOTE:
1. P11 to P15 are provided in the 144-pin package only.
V
mW
°C
0 to 60
-65 to 150
°C
5. Electrical Characteristics
M32C/88 Group (M32C/88T)
Table 5.2 Recommended Operating Conditions
(VCC=4.2 to 5.5V, VSS=0V at Topr = -40 to 85oC (T version)/-40 to 105oC (U version)
unless otherwise specified)
Symbol
Parameter
VCC
AVCC
Supply Voltage
Analog Supply Voltage
VSS
Supply Voltage
Standard
Min.
4.2
Typ.
5.0
VCC
Max.
5.5
0
AVSS
Analog Supply Voltage
VIH
Input High ("H")
Voltage
0.8VCC
V
V
V
0
P00-P07, P10-P17, P20-P27, P30-P37, P40-P47, P50-P57,
P60-P67, P72-P77, P80-P87(3), P90-P97, P100-P107, P110P114, P120-P127, P130-P137(4), P140-P146, P150-P157(4),
Unit
V
VCC
V
XIN, RESET, CNVSS, BYTE
P70, P71
VIL
Input Low ("L")
Voltage
IOH(peak)
Peak Output
High ("H")
Current(2)
IOH(avg)
Average Output
High ("H")
Current(1)
IOL(peak)
IOL(avg)
0.8VCC
6.0
0
0.2VCC
V
-10.0
mA
-5.0
mA
10.0
mA
5.0
mA
P00-P07, P10-P17, P20-P27, P30-P37, P40-P47, P50-P57,
P60-P67, P72-P77, P80-P87(3), P90-P97, P100-P107, P110P114, P120-P127, P130-P137(4), P140-P146, P150-P157(4),
XIN, RESET, CNVSS, BYTE
P00-P07, P10-P17, P20-P27, P30-P37, P40-P47, P50-P57, P60P67, P72-P77, P80-P84, P86, P87, P90-P97, P100-P107, P110-
P114, P120-P127, P130-P137, P140-P146, P150-P157(4)
P00-P07, P10-P17, P20-P27, P30-P37, P40-P47, P50-P57, P60P67, P72-P77, P80-P84, P86, P87, P90-P97, P100-P107, P110P114, P120-P127, P130-P137, P140-P146, P150-P157(4)
Peak Output Low P00-P07, P10-P17, P20-P27, P30-P37, P40-P47, P50-P57, P60("L") Current(2)
P67, P70-P77, P80-P84, P86, P87, P90-P97, P100-P107, P110-
Average Output
Low ("L")
Current(1)
P114, P120-P127, P130-P137, P140-P146, P150-P157(4)
P00-P07, P10-P17, P20-P27, P30-P37, P40-P47, P50-P57, P60P67, P70-P77, P80-P84, P86, P87, P90-P97, P100-P107, P110P114, P120-P127, P130-P137, P140-P146, P150-P157(4)
NOTES:
1. Typical values when average output current is 100 ms.
2. Total IOL(peak) for P0, P1, P2, P86, P87, P9, P10, P11, P14 and P15 must be 80 mA or less.
Total IOL(peak) for P3, P4, P5, P6, P7, P80 to P84, P12 and P13 must be 80 mA or less.
Total IOH(peak) for P0, P1, P2, and P11 must be -40mA or less.
Total IOH(peak) for P86, P87, P9, P10, P14 and P15 must be -40 mA or less.
Total IOH(peak) for P3, P4, P5, P12 and P13 must be -40 mA or less.
Total IOH(peak) for P6, P7, and P80 to P84 must be -40 mA or less.
3. VIH and VIL reference for P87 applies when P87 is used as a programmable input port.
It does not apply when P87 is used as XCIN.
4. Ports P11 to P15 are provided in the 144-pin package only.
Rev. 1.10 Oct. 31, 2005 Page 46
REJ03B0171-0110
of 57
M32C/88 Group (M32C/88T)
5. Electrical Characteristics
Table 5.3 Recommended Operating Conditions (Continued)
(VCC=4.2 to 5.5V, VSS=0V at Topr = -40 to 85oC (T version)/-40 to 105oC (U version)
unless otherwise specified)
Symbol
Standard
Parameter
Min.
Typ.
Max.
Unit
f(BCLK)
CPU Operation Frequency
VCC=4.2 to 5.5 V
0
32
MHz
f(XIN)
Main Clock Input Frequency
VCC=4.2 to 5.5 V
0
24
MHz
f(XCIN)
Sub Clock Frequency
32.768
50
kHz
f(Ring)
On-chip Oscillator Frequency (VCC=5.0V, Topr=25° C)
0.5
1
2
MHz
f(PLL)
PLL Clock Frequency
VCC=4.2 to 5.5 V
10
32
MHz
tSU(PLL)
Wait Time to Stabilize PLL Frequency Synthesizer
VCC=5.0 V
5
ms
Rev. 1.10 Oct. 31, 2005 Page 47 of 57
REJ03B0171-0110
5. Electrical Characteristics
M32C/88 Group (M32C/88T)
VCC=5V
Table 5.4 Electrical Characteristics
(VCC=4.2 to 5.5V, VSS=0V at Topr = -40 to 85oC (T version)/-40 to 105oC (U version),
f(BCLK)=32MHz unless otherwise specified)
Symbol
VOH
Parameter
Output High ("H")
Voltage
P00-P07, P10-P17, P20-P27, P30-P37, P40-P47, IOH=-5 mA
P50-P57, P60-P67, P72-P77, P80-P84, P86,
P87, P90-P97, P100-P107, P110-P114, P120P127, P130-P137, P140-P146, P150-P157(1)
P00-P07, P10-P17, P20-P27, P30-P37, P40-P47, IOH=-200 µA
P50-P57, P60-P67, P72-P77, P80-P84, P86,
P87, P90-P97, P100-P107, P110-P114, P120P127, P130-P137, P140-P146, P150-P157(1)
XOUT
IOH=-1 mA
XCOUT
VOL
Output Low ("L")
Voltage
IIH
IIL
Input High ("H")
Current
Input Low ("L")
Current
RPULLUP Pull-up Resistance
Standard
Min.
Typ.
VCC-2.0
Max.
VCC
VCC-0.3
VCC
3.0
High Power
2.5
Low Power
No load applied
1.6
High Power
No load applied
0
Low Power
No load applied
0
HOLD, RDY, TA0IN-TA4IN, TB0IN-TB5IN,
INT0-INT5, ADTRG, CTS0-CTS4, CLK0-CLK4,
TA0OUT-TA4OUT, NMI, KI0-KI3, RxD0-RxD4,
SCL0-SCL4, SDA0-SDA4
RESET
P00-P07, P10-P17, P20-P27, P30-P37, P40-P47, VI=5 V
P50-P57, P60-P67, P70-P77, P80-P87, P90-P97,
P100-P107, P110-P114, P120-P127, P130P137, P140-P146, P150-P157(1), XIN, RESET,
CNVSS, BYTE
P00-P07, P10-P17, P20-P27, P30-P37, P40-P47, VI=0 V
P50-P57, P60-P67, P70-P77, P80-P87, P90-P97,
P100-P107, P110-P114, P120-P127, P130P137, P140-P146, P150-P157(1), XIN, RESET,
CNVSS, BYTE
P00-P07, P10-P17, P20-P27, P30-P37, P40-P47, VI=0 V
Unit
V
V
V
No load applied
P00-P07, P10-P17, P20-P27, P30-P37, P40-P47, IOL=5mA
P50-P57, P60-P67, P70-P77, P80-P84, P86,
P87, P90-P97, P100-P107, P110-P114, P120P127, P130-P137, P140-P146, P150-P157(1)
P00-P07, P10-P17, P20-P27, P30-P37, P40-P47, IOL=200 µA
P50-P57, P60-P67, P70-P77, P80-P84, P86,
P87, P90-P97, P100-P107, P110-P114, P120P127, P130-P137, P140-P146, P150-P157(1)
XOUT
IOL=1 mA
XCOUT
VT+-VT- Hysteresis
Condition
V
2.0
V
0.45
V
2.0
V
V
0.2
1.0
V
0.2
1.8
5.0
V
µA
-5.0
µA
167
kΩ
30
50
P50-P57, P60-P67, P72-P77, P80-P84, P86,
P87, P90-P97, P100-P107, P110-P114, P120P127, P130-P137, P140-P146, P150-P157(1)
Feedback Resistance XIN
RfXIN
Feedback Resistance XCIN
RfXCIN
RAM Standby Voltage In stop mode
VRAM
NOTE:
1. Ports P11 to P15 are provided in the 144-pin package only.
Rev. 1.10 Oct. 31, 2005 Page 48
REJ03B0171-0110
of 57
1.5
10
2.0
MΩ
MΩ
V
5. Electrical Characteristics
M32C/88 Group (M32C/88T)
VCC=5V
Table 5.4 Electrical Characteristics (Continued)
(VCC=4.2 to 5.5V, VSS=0V at Topr = -40 to 85oC (T version)/-40 to 105oC (U version),
f(BCLK)=32MHz unless otherwise specified)
Symbol
I CC
Parameter
Measurement Condition
Power Supply Current In single-chip mode, output
pins are left open and other
pins are connected to VSS.
Standard
Min.
f(BCLK)=32 MHz, Square wave,
No division
f(BCLK)=32 kHz,
In low-power consumption mode,
Program running on ROM
f(BCLK)=32 kHz,
In low-power consumption mode,
Program running on RAM(1)
f(BCLK)=32 kHz, In wait mode,
Topr=25° C
While clock stops, Topr=25° C
While clock stops, Topr=85° C
While clock stops, Topr=105° C
While clock stops, Topr=125° C
NOTE:
1. Value is obtained when setting the FMSTP bit in the FMR0 register to "1" (flash memory stopped).
Rev. 1.10 Oct. 31, 2005 Page 49 of 57
REJ03B0171-0110
Typ.
28
Unit
Max.
50 mA
430
µA
25
µA
10
µA
0.8
5
50
100
200
µA
µA
µA
µA
5. Electrical Characteristics
M32C/88 Group (M32C/88T)
VCC=5V
Table 5.5 A/D Conversion Characteristics
(VCC=4.2 to 5.5V, VSS=0V at Topr = -40 to 85oC (T version)/-40 to 105oC (U version),
f(BCLK)=32MHz unless otherwise specified)
Symbol
Parameter
Standard
Measurement Condition
Min.
-
INL
Resolution
VREF=VCC
Integral Nonlinearity Error
DNL
VREF=VCC=5V
Unit
Typ. Max.
10
AN0 to AN7, AN00 to
AN07, AN20 to AN27,
AN150 to AN157,
ANEX0, ANEX1
±3
External op-amp
connection mode
±7
Bits
LSB
LSB
LSB
LSB
Differential Nonlinearity Error
±1
LSB
-
Offset Error
±3
LSB
-
Gain Error
±3
LSB
40
kΩ
RLADDER
Resistor Ladder
tCONV
10-bit Conversion Time(1, 2)
VREF=VCC
8
Time(1, 2)
2.06
µs
1.75
µs
0.188
µs
tCONV
8-bit Conversion
tSAMP
Sampling Time(1)
VREF
Reference Voltage
2
VCC
V
VIA
Analog Input Voltage
0
VREF
V
NOTES:
1. Divide f(XIN), if exceeding 16 MHz, to keep φAD frequency at 16 MHz or less.
2. With using the sample and hold function.
Table 5.6 D/A Conversion Characteristics
(VCC=4.2 to 5.5V, VSS=0V at Topr = -40 to 85oC (T version)/-40 to 105oC (U version),
f(BCLK)=32MHz unless otherwise specified)
Symbol
Parameter
Standard
Measurement Condition
Min.
tSU
-
Resolution
-
Absolute Accuracy
Typ.
Unit
Max.
Setup Time
RO
Output Resistance
IVREF
Reference Power Supply Input Current
4
10
(Note 1)
NOTE:
1. Measurement when using one D/A converter. The DAi register (i=0, 1) of the D/A converter, not being
used, is set to "0016". The resistor ladder in the A/D converter is excluded.
IVREF flows even if the VCUT bit in the AD0CON1 register is set to "0" (no VREF connection).
Rev. 1.10 Oct. 31, 2005 Page 50
REJ03B0171-0110
of 57
8
Bits
1.0
%
3
µs
20
kΩ
1.5
mA
5. Electrical Characteristics
M32C/88 Group (M32C/88T)
VCC=5V
Table 5.7 Flash Memory Version Electrical Characteristics
(VCC=4.5 to 5.5V at Topr= 0 to 60oC unless otherwise specified)
Symbol
Standard
Parameter
Min.
100
Typ.
Max.
Unit
-
Program and Erase Endurance(2)
-
Word Program Time (VCC=5.0V, Topr=25° C)
25
200
µs
-
Lock Bit Program Time
Block Erase Time
(VCC=5.0V, Topr=25° C)
25
0.3
0.3
0.5
0.8
µs
-
All-Unlocked-Block Erase Time(1)
Wait Time to Stabilize Flash Memory Circuit
Data Hold Time (Topr=-40 to 85 ° C)
200
4
4
4
4
4xn
15
tPS
4-Kbyte Block
8-Kbyte Block
32-Kbyte Block
64-Kbyte Block
cycles
s
s
s
s
s
µs
10
years
NOTES:
1. n denotes the number of block to be erased.
2. Number of program-erase cycles per block.
If Program and Erase Endurance is n cycle (n=100), each block can be erased and programmed n cycles.
For example, if a 4-Kbyte block A is erased after programming a word data 2,048 times, each to a different
address, this counts as one program and erase endurance. Data can not be programmed to the same address
more than once without erasing the block. (rewrite prohibited).
Table 5.8 Power Supply Timing
Symbol
Parameter
Standard
Measurement Condition
Min.
td(P-R)
Wait Time to Stabilize Internal Supply Voltage when
Power-on
td(P-R)
Recommanded
Operating Voltage
VCC
Wait Time to Stabilize Internal
Supply Voltage when Power-on
td(P-R)
CPU Clock
Figure 5.1 Power Supply Timing Diagram
Rev. 1.10 Oct. 31, 2005 Page 51 of 57
REJ03B0171-0110
VCC=4.2 to 5.5V
Typ.
Unit
Max.
2
ms
5. Electrical Characteristics
M32C/88 Group (M32C/88T)
VCC=5V
Timing Requirements
(VCC=4.2 to 5.5V, VSS=0V at Topr = -40 to 85oC (T version)/-40 to 105oC (U version) unless
otherwise specified)
Table 5.9 External Clock Input
Symbol
Parameter
Standard
Min.
Max.
Unit
tc
External Clock Input Cycle Time
31.25
ns
tw(H)
External Clock Input High ("H") Width
13.75
ns
tw(L)
External Clock Input Low ("L") Width
13.75
ns
tr
External Clock Rise Time
5
ns
tf
External Clock Fall Time
5
ns
Rev. 1.10 Oct. 31, 2005 Page 52
REJ03B0171-0110
of 57
5. Electrical Characteristics
M32C/88 Group (M32C/88T)
VCC=5V
Timing Requirements
(VCC=4.2 to 5.5V, VSS=0V at Topr = -40 to 85oC (T version)/-40 to 105oC (U version) unless
otherwise specified)
Table 5.10 Timer A Input (Count Source Input in Event Counter Mode)
Symbol
Standard
Parameter
Min.
Unit
Max.
tc(TA)
TAiIN Input Cycle Time
100
ns
tw(TAH)
TAiIN Input High ("H") Width
40
ns
tw(TAL)
TAiIN Input Low ("L") Width
40
ns
Table 5.11 Timer A Input (Gate Input in Timer Mode)
Standard
Symbol
Parameter
Min.
Max.
Unit
tc(TA)
TAiIN Input Cycle Time
400
ns
tw(TAH)
TAiIN Input High ("H") Width
200
ns
tw(TAL)
TAiIN Input Low ("L") Width
200
ns
Table 5.12 Timer A Input (External Trigger Input in One-Shot Timer Mode)
Standard
Symbol
Parameter
Unit
Min.
Max.
tc(TA)
TAiIN Input Cycle Time
200
ns
tw(TAH)
TAiIN Input High ("H") Width
100
ns
tw(TAL)
TAiIN Input Low ("L") Width
100
ns
Table 5.13 Timer A Input (External Trigger Input in Pulse Width Modulation Mode)
Standard
Symbol
Parameter
Unit
Min.
Max.
tw(TAH)
TAiIN Input High ("H") Width
100
ns
tw(TAL)
TAiIN Input Low ("L") Width
100
ns
Table 5.14 Timer A Input (Counter Increment/Decrement Input in Event Counter Mode)
Standard
Symbol
Parameter
Unit
Min.
Max.
tc(UP)
TAiOUT Input Cycle Time
2000
ns
tw(UPH)
TAiOUT Input High ("H") Width
1000
ns
tw(UPL)
TAiOUT Input Low ("L") Width
1000
ns
tsu(UP-TIN)
TAiOUT Input Setup Time
400
ns
th(TIN-UP)
TAiOUT Input Hold Time
400
ns
Rev. 1.10 Oct. 31, 2005 Page 53 of 57
REJ03B0171-0110
5. Electrical Characteristics
M32C/88 Group (M32C/88T)
VCC=5V
Timing Requirements
(VCC=4.2 to 5.5V, VSS=0V at Topr = -40 to 85oC (T version)/-40 to 105oC (U version) unless otherwise specified)
Table 5.15 Timer B Input (Count Source Input in Event Counter Mode)
Symbol
Parameter
Standard
Min.
Max.
Unit
tc(TB)
TBiIN Input Cycle Time (counted on one edge)
tw(TBH)
TBiIN Input High ("H") Width (counted on one edge)
40
ns
tw(TBL)
TBiIN Input Low ("L") Width (counted on one edge)
40
ns
100
ns
tc(TB)
TBiIN Input Cycle Time (counted on both edges)
200
ns
tw(TBH)
TBiIN Input High ("H") Width (counted on both edges)
80
ns
tw(TBL)
TBiIN Input Low ("L") Width (counted on both edges)
80
ns
Table 5.16 Timer B Input (Pulse Period Measurement Mode)
Symbol
Parameter
Standard
Min.
Max.
Unit
tc(TB)
TBiIN Input Cycle Time
400
ns
tw(TBH)
TBiIN Input High ("H") Width
200
ns
tw(TBL)
TBiIN Input Low ("L") Width
200
ns
Table 5.17 Timer B Input (Pulse Width Measurement Mode)
Standard
Symbol
Parameter
Unit
Min.
Max.
tc(TB)
TBiIN Input Cycle Time
400
ns
tw(TBH)
TBiIN Input High ("H") Width
200
ns
tw(TBL)
TBiIN Input Low ("L") Width
200
ns
Table 5.18 A/D Trigger Input
Symbol
Parameter
Standard
Min.
Max
Unit
tc(AD)
ADTRG Input Cycle Time (required for trigger)
1000
ns
tw(ADL)
ADTRG Input Low ("L") Pulse Width
125
ns
Table 5.19 Serial I/O
Symbol
Parameter
Standard
Min.
Max.
Unit
tc(CK)
CLKi Input Cycle Time
200
ns
tw(CKH)
CLKi Input High ("H") Width
100
ns
tw(CKL)
CLKi Input Low ("L") Width
100
td(C-Q)
TxDi Output Delay Time
ns
80
ns
th(C-Q)
TxDi Hold Time
0
ns
tsu(D-C)
RxDi Input Setup Time
30
ns
th(C-Q)
RxDi Input Hold Time
90
ns
_______
Table 5.20 External Interrupt INTi Input
Symbol
Parameter
Standard
Min.
Max.
Unit
tw(INH)
INTi Input High ("H") Width
250
ns
tw(INL)
INTi Input Low ("L") Width
250
ns
Rev. 1.10 Oct. 31, 2005 Page 54
REJ03B0171-0110
of 57
5. Electrical Characteristics
M32C/88 Group (M32C/88T)
VCC=5V
P0
P1
P2
P3
P4
P5
P6
P7
30pF
P8
P9
P10
P11
P12
P13
Note 1
P14
P15
NOTE:
1. Ports P11 to P15 are provided in the 144-pin package only.
Figure 5.2 P0 to P15 Measurement Circuit
Rev. 1.10 Oct. 31, 2005 Page 55 of 57
REJ03B0171-0110
5. Electrical Characteristics
M32C/88 Group (M32C/88T)
Vcc=5V
tc(TA)
tw(TAH)
TAiIN Input
tw(TAL)
tc(UP)
tw(UPH)
TAiOUT Input
tw(UPL)
TAiOUT Input
(Counter increment/
decrement input)
In event counter mode
TAiIN Input
th(TIN–UP)
tsu(UP–TIN)
(When counting on the falling edge)
TAiIN Input
(When counting on the rising edge)
tc(TB)
tw(TBH)
TBiIN Input
tw(TBL)
tc(AD)
tw(ADL)
ADTRG Input
tc(CK)
tw(CKH)
CLKi
tw(CKL)
th(C–Q)
TxDi
td(C–Q)
tsu(D–C)
th(C–D)
RxDi
tw(INL)
INTi Input
tw(INH)
NMI Input
2 CPU clock cycles +
300ns or more
("L" width)
Figure 5.3 VCC=5V Timing Diagram
Rev. 1.10 Oct. 31, 2005 Page 56
REJ03B0171-0110
of 57
2 CPU clock cycles +
300ns or more
Package Dimensions
M32C/88 Group (M32C/88T)
Package Dimensions
JEITA Package Code
P-LQFP144-20x20-0.50
RENESAS Code
PLQP0144KA-A
Previous Code
144P6Q-A / FP-144L / FP-144LV
MASS[Typ.]
1.2g
HD
*1
D
108
73
109
NOTE)
1. DIMENSIONS "*1" AND "*2"
DO NOT INCLUDE MOLD FLASH.
2. DIMENSION "*3" DOES NOT
INCLUDE TRIM OFFSET.
72
bp
c
Reference
Symbol
*2
E
HE
c1
b1
Terminal cross section
Index mark
c
36
A
1
ZD
ZE
37
A2
144
D
E
A2
HD
HE
A
A1
bp
b1
c
c1
A1
F
L
L1
e
x
y
ZD
ZE
L
L1
*3
e
bp
y
JEITA Package Code
P-LQFP100-14x14-0.50
RENESAS Code
PLQP0100KB-A
Detail F
x
Previous Code
100P6Q-A / FP-100U / FP-100UV
Dimension in Millimeters
Min Nom Max
19.9 20.0 20.1
19.9 20.0 20.1
1.4
21.8 22.0 22.2
21.8 22.0 22.2
1.7
0.05 0.1 0.15
0.17 0.22 0.27
0.20
0.09 0.145 0.20
0.125
0°
8°
0.5
0.08
0.10
1.25
1.25
0.35 0.5 0.65
1.0
MASS[Typ.]
0.6g
HD
*1
D
51
75
NOTE)
1. DIMENSIONS "*1" AND "*2"
DO NOT INCLUDE MOLD FLASH.
2. DIMENSION "*3" DOES NOT
INCLUDE TRIM OFFSET.
50
76
bp
HE
Reference
Symbol
c
c1
*2
E
b1
D
E
A2
HD
HE
A
A1
bp
b1
c
c1
100
26
1
ZE
Terminal cross section
25
Index mark
ZD
y
e
*3
bp
A1
c
A
A2
F
L
x
L1
Detail F
Rev. 1.10 Oct. 31, 2005 Page 57
REJ03B0171-0110
of 57
e
x
y
ZD
ZE
L
L1
Dimension in Millimeters
Min Nom Max
13.9 14.0 14.1
13.9 14.0 14.1
1.4
15.8 16.0 16.2
15.8 16.0 16.2
1.7
0.05 0.1 0.15
0.15 0.20 0.25
0.18
0.09 0.145 0.20
0.125
0°
8°
0.5
0.08
0.08
1.0
1.0
0.35 0.5 0.65
1.0
REVISION HISTORY
Rev.
M32C/88 Group (M32C/88T) Datasheet
Date
Description
Summary
Page
1.10 Oct.31, 2005
–
New Document
A-1
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Keep safety first in your circuit designs!
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble
may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary
circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party.
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data,
diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of
publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is
therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product
information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor
home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to
evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes
no responsibility for any damage, liability or other loss resulting from the information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life
is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a
product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater
use.
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and
cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
http://www.renesas.com
RENESAS SALES OFFICES
Refer to "http://www.renesas.com/en/network" for the latest and detailed information.
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2730-6071
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology (Shanghai) Co., Ltd.
Unit2607 Ruijing Building, No.205 Maoming Road (S), Shanghai 200020, China
Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
Renesas Technology Korea Co., Ltd.
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea
Tel: <82> 2-796-3115, Fax: <82> 2-796-2145
Renesas Technology Malaysia Sdn. Bhd.
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: <603> 7955-9390, Fax: <603> 7955-9510
© 2005. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .3.0