ELECTRIC DOUBLE LAYER CAPACITORS "EVerCAP " JD Screw Terminal Type, High Energy Density Type series JD High energy density. Suitable for electric power storage. Available for adapted to the RoHS directive (2002/95/EC). High Energy Density JC Specifications Item Performance Characteristics Category Temperature Range – 25 to + 60°C Rated Voltage Range 2.5V Rated Capacitance Range 600 to 4000F Capacitance Tolerance ± 20% (20°C) Leakage Current 0.5C (mA) [C : Rated Capacitance (F)] (After 30 minutes' application of rated voltage. 2.5V) Stability at Temperature Capacitance (– 25°C) /Capacitance (+20°C) ×100 DCR* Refer to the list below. (20°C) * DC internal resistance Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 60°C. See Note DCR(–25°C) / DCR (+20°C) 70% Shelf Life The specifications listed at right shall be met when the capacitors are restored to 20°C after storing the capacitors under no load for 2000 hours at 60°C. Marking Printed with white color letter on black sleeve. Capacitance change DCR Leakage current Capacitance change DCR Leakage current 7 Within ±30% of initial value 300% or less of initial specified value Less than or equal to the initial specified value Within ±30% of initial value 300% or less of initial specified value Less than or equal to the initial specified value Type numbering system (Example : 2.5V 600F) Drawing φ 35, φ 40 1 Hexagenal headed bolt Bottom plate Sleeve 2 3 4 5 6 7 8 9 10 11 12 13 14 J J D 0 E 6 0 7 M S E C M5(φ35) M6(φ40) Mounting bracket Case dia. code(φ35) (φ35, φ40) h H±0.5 L+αMAX. S Configuration Capacitance tolerance (±20%) Rated Capacitance (600F) Rated voltage (2.5V) U B±1 + θ˚ W±1 φ D +2MAX. Pressure relief vent T Series name Type P A±1 r±1 Code less 2-leg brackets BN No brackets φD Code C 35 D 40 F 51 63.5 G (φ51, φ63.5) Code less 3-leg brackets BB 2-leg brackets No bracket BN Configuration Cr ( III ) Plating (RoHS compliant) SE φ 51 and larger Hexagenal headed bolt Sleeve U S 0° 12 M6 T Bottom plate P D +2MAX. W±1 A±2 Pressure relief vent S P ±2 h T L+α MAX. Pressure relief vent U A ±2 H ±1 30° ±1 Dimensions of mounting bracket Dimensions Rated Voltage ( Code ) 2.5V (0E) Cap. (F) 600 800 950 1000 1300 2300 2500 4000 Cap. code 607 807 957 108 138 238 258 408 DCR (mΩ) 16 13 10 10 8 5 4 3 Leg shape Case size φ (mm) 35 40 51 63.5 L (mm) 085 105 135 105 135 135 150 150 Ref. Weight (g) 130 160 210 210 250 450 500 800 Dimensions of terminal pitch(W) and length(R) and Normal dia. of bolt (mm) φD 35 40 51 63.5 W 12.7 18.8 22.0 28.6 R 6 9 10 10 α 3 3 3 3 Nominal of bolt M5 M6 M6 M6 Symbol P A B T S U θ° H h φD 3-Legs 51 32.5 38.5 63.5 38.1 43 – – 7.5 5.0 12 60 20 15 8.0 5.0 14 60 25 20 (mm) 2-Legs 35 24 29 45 7.0 3.5 10 30 15 10 40 27 32 48 7.0 3.5 10 45 17 12 51 33.2 40 63.5 40.5 46.5 – – 6.0 4.5 14 30 25 15 7.0 4.5 14 30 35 20 Note : The capacitance calculated from discharge time (∆T) with constant current ( i ) after 30minuite charge with rated voltage (2.5V). The discharge current ( i ) is 0.01 × F (rated capacitance). A discharge time (∆T) measured between 2V and 1V with constant current. The capacitance calculated bellow. Capacitance (F) = i × ∆T CAT.8100X