IRF IRHMS63164 Radiation hardened power mosfet thru-hole (low-ohmic to-254aa) Datasheet

PD-96958
RADIATION HARDENED
POWER MOSFET
THRU-HOLE (Low-Ohmic TO-254AA)
IRHMS67164
150V, N-CHANNEL
TECHNOLOGY
Product Summary
Part Number Radiation Level RDS(on)
ID
IRHMS67164 100K Rads (Si) 0.019Ω 45A*
IRHMS63164 300K Rads (Si) 0.019Ω 45A*
International Rectifier’s R6TM technology provides
superior power MOSFETs for space applications.
These devices have improved immunity to Single
Event Effect (SEE) and have been characterized for
useful performance with Linear Energy Transfer
(LET) up to 90MeV/(mg/cm2).
Their combination of very low RDS(on) and faster
switching times reduces power loss and increases
power density in today’s high speed switching
applications such as DC-DC converters and motor
controllers. These devices retain all of the well
established advantages of MOSFETs such as voltage
control, ease of paralleling and temperature stability
of electrical parameters.
Low-Ohmic
TO-254AA
Features:
n
n
n
n
n
n
n
n
n
n
Low RDS(on)
Fast Switching
Single Event Effect (SEE) Hardened
Low Total Gate Charge
Simple Drive Requirements
Ease of Paralleling
Hermetically Sealed
Ceramic Eyelets
Electrically Isolated
Light Weight
Absolute Maximum Ratings
Pre-Irradiation
Parameter
ID @ VGS = 12V, TC = 25°C
ID @ VGS = 12V, TC = 100°C
IDM
PD @ TC = 25°C
VGS
EAS
IAR
EAR
dv/dt
TJ
T STG
Continuous Drain Current
Continuous Drain Current
Pulsed Drain Current À
Max. Power Dissipation
Linear Derating Factor
Gate-to-Source Voltage
Single Pulse Avalanche Energy Á
Avalanche Current À
Repetitive Avalanche Energy À
Peak Diode Recovery dv/dt Â
Operating Junction
Storage Temperature Range
Lead Temperature
Weight
Units
45*
44
180
208
1.67
±20
353
45
20.8
8.2
-55 to 150
A
W
W/°C
V
mJ
A
mJ
V/ns
o
C
300 (0.063 in. /1.6 mm from case for 10s)
9.3 (Typical)
g
* Current is limited by package
For footnotes refer to the last page
www.irf.com
1
12/22/05
IRHMS67164
Pre-Irradiation
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
Parameter
Min
Drain-to-Source Breakdown Voltage
150
—
—
V
VGS = 0V, ID = 1.0mA
—
0.18
—
V/°C
Reference to 25°C, ID = 1.0mA
—
—
0.019
Ω
VGS = 12V, ID = 44A Ã
2.0
49
—
—
—
—
—
—
4.0
—
10
25
V
S( )
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
6.8
100
-100
230
55
90
35
120
85
25
—
nC
VDS = VGS, ID = 1.0mA
VDS = 15V, IDS = 44A Ã
VDS = 120V ,VGS = 0V
VDS = 120V,
VGS = 0V, TJ = 125°C
VGS = 20V
VGS = -20V
VGS =12V, ID = 45A
VDS = 75V
ns
VDD = 75V, ID = 45A
VGS =12V, RG = 2.35Ω
∆BV DSS /∆T J Temperature Coefficient of Breakdown
Voltage
RDS(on)
Static Drain-to-Source On-State
Resistance
VGS(th)
Gate Threshold Voltage
g fs
Forward Transconductance
IDSS
Zero Gate Voltage Drain Current
IGSS
IGSS
Qg
Q gs
Q gd
td(on)
tr
td(off)
tf
LS + LD
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain (‘Miller’) Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Total Inductance
Typ Max Units
Ω
BVDSS
µA
nA
Test Conditions
nH Measured from Drain lead (6mm /0.25in.
from package) to Source lead (6mm /0.25in.
from package) with Source wires internally
bonded from Source Pin to Drain Pad
Ciss
Coss
Crss
Rg
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Internal Gate Resistance
—
—
—
—
7380
1140
28
0.52
—
—
—
—
pF
Ω
VGS = 0V, VDS = 25V
f = 1.0MHz
f = 1.0MHz, open drain
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
IS
ISM
VSD
trr
Q RR
Continuous Source Current (Body Diode)
Pulse Source Current (Body Diode) À
Diode Forward Voltage
Reverse Recovery Time
Reverse Recovery Charge
ton
Forward Turn-On Time
—
—
—
—
—
—
—
—
—
—
45*
180
1.2
370
3.8
Test Conditions
A
V
ns
µC
Tj = 25°C, IS = 45A, VGS = 0V Ã
Tj = 25°C, IF = 45A, di/dt ≤ 100A/µs
VDD ≤ 50V Ã
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
* Current is limited by package
Thermal Resistance
Parameter
RthJC
RthCS
RthJA
Junction-to-Case
Case-to-Sink
Junction-to-Ambient
Min Typ Max Units
—
—
—
— 0.60
0.21 —
—
48
Test Conditions
°C/W
Typical socket mount
Note: Corresponding Spice and Saber models are available on International Rectifier Web site.
For footnotes refer to the last page
2
www.irf.com
Radiation Characteristics
Pre-Irradiation
IRHMS67164
International Rectifier Radiation Hardened MOSFETs are tested to verify their radiation hardness capability.
The hardness assurance program at International Rectifier is comprised of two radiation environments.
Every manufacturing lot is tested for total ionizing dose (per notes 5 and 6) using the TO-3 package. Both
pre- and post-irradiation performance are tested and specified using the same drive circuitry and test
conditions in order to provide a direct comparison.
Table 1. Electrical Characteristics @ Tj = 25°C, Post Total Dose Irradiation ÄÅ
Parameter
BVDSS
VGS(th)
IGSS
IGSS
IDSS
RDS(on)
RDS(on)
VSD
Up to 300K Rads (Si)
Drain-to-Source Breakdown Voltage
Gate Threshold Voltage
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
Zero Gate Voltage Drain Current
Static Drain-to-Source „
On-State Resistance (TO-3)
Static Drain-to-Sourcee On-State „
Resistance (Low Ohmic TO-254AA)
„
Diode Forward Voltage
Units
Test Conditions ˆ
Min
Max
150
2.0
—
—
—
—
4.0
100
-100
10
µA
VGS = 0V, ID = 1.0mA
V GS = VDS, ID = 1.0mA
VGS = 20V
VGS = -20V
VDS= 120V, VGS= 0V
—
0.019
Ω
VGS = 12V, ID = 44A
—
0.019
Ω
VGS = 12V, ID = 44A
—
1.2
V
VGS = 0V, ID = 45A
V
nA
Part numbers IRHMS67164 and IRHMS63164
International Rectifier radiation hardened MOSFETs have been characterized in heavy ion environment for
Single Event Effects (SEE). Single Event Effects characterization is illustrated in Fig. a and Tables.
Tables for Single Event Effect Safe Operating Area
Ion Kr
Ion Xe
Ion Au
LET = 39 MeV/(mg/cm2)
Energy = 312 MeV
Range = 39 µm
VGS Bias
VDS Bias
(Volts)
(Volts)
0
150
-5
150
-10
150
-15
150
-20
150
LET = 59 MeV/(mg/cm2)
Energy = 825 MeV
Range = 66 µm
VGS Bias
VDS Bias
(Volts)
(Volts)
0
150
-5
150
-9
150
-10
140
-11
50
-15
40
LET = 90 MeV/(mg/cm2)
Energy = 1480 MeV
Range = 80 µm
VGS Bias
VDS Bias
(Volts)
(Volts)
0
50
-5
50
-10
30
180
150
VDS
120
Kr
90
Xe
Au
60
30
0
0
-5
-10
-15
-20
VGS
Fig a. Single Event Effect, Safe Operating Area
For footnotes refer to the last page
www.irf.com
3
IRHMS67164
1000
Pre-Irradiation
1000
VGS
15V
12V
10V
9.0V
8.0V
7.0V
6.0V
BOTTOM 5.0V
VGS
15V
12V
10V
9.0V
8.0V
7.0V
6.0V
BOTTOM 5.0V
100
TOP
ID, Drain-to-Source Current (A)
ID, Drain-to-Source Current (A)
TOP
10
5.0V
60µs PULSE WIDTH
Tj = 25°C
1
0.1
1
10
100
5.0V
10
60µs PULSE WIDTH
Tj = 150°C
1
100
0.1
VDS, Drain-to-Source Voltage (V)
100
Fig 2. Typical Output Characteristics
1000
3.0
RDS(on) , Drain-to-Source On Resistance
T J = 150°C
100
(Normalized)
ID, Drain-to-Source Current (A)
10
VDS , Drain-to-Source Voltage (V)
Fig 1. Typical Output Characteristics
T J = 25°C
10
VDS = 50V
15
60µs PULSE
WIDTH
1
ID = 45A
2.5
2.0
1.5
1.0
0.5
VGS = 12V
0.0
5
5.5
6
6.5
7
7.5
8
VGS, Gate-to-Source Voltage (V)
Fig 3. Typical Transfer Characteristics
4
1
-60 -40 -20
0
20
40
60
80 100 120 140 160
TJ , Junction Temperature (°C)
Fig 4. Normalized On-Resistance
Vs. Temperature
www.irf.com
Pre-Irradiation
14000
20
100KHz
VGS = 0V,
f = 1 MHz
C iss = C gs + C gd, C ds SHORTED
C rss = C gd
C oss = C ds + C gd
10000
Ciss
8000
Coss
6000
4000
Crss
2000
16
12
8
4
FOR TEST CIRCUIT
SEE FIGURE 13
0
0
1
10
100
0
40
VDS, Drain-to-Source Voltage (V)
80
120
160
200
240
280
QG, Total Gate Charge (nC)
Fig 6. Typical Gate Charge Vs.
Gate-to-Source Voltage
Fig 5. Typical Capacitance Vs.
Drain-to-Source Voltage
1000
1000
ID, Drain-to-Source Current (A)
ISD, Reverse Drain Current (A)
VDS = 120V
VDS = 75V
VDS = 30V
ID = 45A
VGS, Gate-to-Source Voltage (V)
12000
C, Capacitance (pF)
IRHMS67164
100
T J = 150°C
T J = 25°C
10
OPERATION IN THIS AREA
LIMITED BY R DS(on)
100
100µs
10
1ms
1
0.1
1.0
0.0
0.5
1.0
1.5
2.0
2.5
VSD , Source-to-Drain Voltage (V)
Fig 7. Typical Source-Drain Diode
Forward Voltage
www.irf.com
3.0
10ms
Tc = 25°C
Tj = 150°C
Single Pulse
VGS = 0V
1
10
100
1000
VDS , Drain-to-Source Voltage (V)
Fig 8. Maximum Safe Operating Area
5
IRHMS67164
Pre-Irradiation
70
LIMITED BY PACKAGE
VGS
60
ID , Drain Current (A)
RD
VDS
D.U.T.
RG
+
-V DD
50
VGS
40
Pulse Width ≤ 1 µs
Duty Factor ≤ 0.1 %
30
Fig 10a. Switching Time Test Circuit
20
VDS
10
0
90%
25
50
75
100
125
150
TC , Case Temperature ( °C)
10%
VGS
td(on)
Fig 9. Maximum Drain Current Vs.
Case Temperature
tr
t d(off)
tf
Fig 10b. Switching Time Waveforms
1
Thermal Response ( Z thJC )
D = 0.50
0.20
0.1
0.10
0.05
0.02
0.01
0.01
P DM
t1
SINGLE PULSE
( THERMAL RESPONSE )
t2
0.001
Notes:
1. Duty Factor D = t1/t2
2. Peak Tj = P dm x Zthjc + Tc
0.0001
1E-006
1E-005
0.0001
0.001
0.01
0.1
1
t1 , Rectangular Pulse Duration (sec)
Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case
6
www.irf.com
Pre-Irradiation
IRHMS67164
15V
L
VDS
D.U.T.
RG
VGS
20V
IAS
DRIVER
+
- VDD
0.01Ω
tp
Fig 12a. Unclamped Inductive Test Circuit
A
EAS , Single Pulse Avalanche Energy (mJ)
700
600
TOP
500
BOTTOM
ID
20A
28.5A
45A
400
300
200
100
0
25
V(BR)DSS
50
75
100
125
150
Starting T J , Junction Temperature (°C)
tp
Fig 12c. Maximum Avalanche Energy
Vs. Drain Current
I AS
Current Regulator
Same Type as D.U.T.
Fig 12b. Unclamped Inductive Waveforms
50KΩ
QG
12 V
QGS
.3µF
D.U.T.
QGD
+
V
- DS
VGS
VG
3mA
Charge
Fig 13a. Basic Gate Charge Waveform
www.irf.com
12V
.2µF
IG
ID
Current Sampling Resistors
Fig 13b. Gate Charge Test Circuit
7
IRHMS67164
Pre-Irradiation
Footnotes:
À Repetitive Rating; Pulse width limited by
à Pulse width ≤ 300 µs; Duty Cycle ≤ 2%
Ä Total Dose Irradiation with VGS Bias.
maximum junction temperature.
Á VDD = 25V, starting TJ = 25°C, L= 0.35 mH
Peak IL = 45A, VGS =12V
 ISD ≤ 45A, di/dt ≤ 940A/µs,
VDD ≤ 150V, TJ ≤ 150°C
12 volt VGS applied and V DS = 0 during
irradiation per MIL-STD-750, method 1019, condition A.
Å Total Dose Irradiation with VDS Bias.
120 volt V DS applied and VGS = 0 during
irradiation per MlL-STD-750, method 1019, condition A.
Case Outline and Dimensions — Low-Ohmic TO-254AA
0.12 [.005]
13.84 [.545]
13.59 [.535]
3.78 [.149]
3.53 [.139]
6.60 [.260]
6.32 [.249]
A
20.32 [.800]
20.07 [.790]
17.40 [.685]
16.89 [.665]
1
C
2
2X
B
3
14.48 [.570]
12.95 [.510]
3X
3.81 [.150]
13.84 [.545]
13.59 [.535]
1.27 [.050]
1.02 [.040]
0.84 [.033]
MAX.
1.14 [.045]
0.89 [.035]
0.36 [.014]
3.81 [.150]
B A
NOT ES:
1.
2.
3.
4.
DIMENSIONING & TOLERANCING PER ASME Y14.5M-1994.
ALL DIMENSIONS ARE SHOWN IN MILLIMETERS [INCHES].
CONTROLLING DIMENSION: INCH.
CONFORMS TO JEDEC OUTLINE TO-254AA.
PIN ASSIGNMENTS
1 = DRAIN
2 = SOURCE
3 = GATE
CAUTION
BERYLLIA WARNING PER MIL-PRF-19500
Package containing beryllia shall not be ground, sandblasted, machined, or have other operations performed on them
which will produce beryllia or beryllium dust. Furthermore, beryllium oxide packages shall not be placed in acids that
will produce fumes containing beryllium.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
IR LEOMINSTER : 205 Crawford St., Leominster, Massachusetts 01453, USA Tel: (978) 534-5776
TAC Fax: (310) 252-7903
Visit us at www.irf.com for sales contact information.
Data and specifications subject to change without notice. 12/2005
8
www.irf.com
Similar pages