HCF4030B QUAD EXCLUSIVE-OR GATE ■ ■ ■ ■ ■ ■ ■ MEDIUM SPEED OPERATION - tPHL = tPLH = 65ns (TYP.) at CL = 50pF and VDD-VSS = 10V LOW OUTPUT IMPEDANCE : 500 Ω (TYP.) at VDD-VSS = 10V QUIESCENT CURRENT SPECIFIED UP TO 20V 5V, 10V AND 15V PARAMETRIC RATINGS INPUT LEAKAGE CURRENT II = 100nA (MAX) AT VDD = 18V TA = 25°C 100% TESTED FOR QUIESCENT CURRENT MEETS ALL REQUIREMENTS OF JEDEC JESD13B "STANDARD SPECIFICATIONS FOR DESCRIPTION OF B SERIES CMOS DEVICES" DIP SOP ORDER CODES PACKAGE TUBE T&R DIP SOP HCF4030BEY HCF4030BM1 HCF4030M013TR DESCRIPTION HCF4030B is a monolithic integrated circuit fabricated in Metal Oxide Semiconductor technology available in DIP and SOP packages. HCF4030B types consist of four indipendent exclusive-OR gates integrated on a single monolithic silicon chip. Each exclusive-OR gate consists of four n-channel and four p-channel enhancement-type transistors. All inputs and outputs are protected against electrostatic effects. PIN CONNECTION September 2002 1/10 HCF4030B INPUT EQUIVALENT CIRCUIT PIN DESCRIPTION PIN No SYMBOL NAME AND FUNCTION 2, 1, 5, 6, 8, A, B, C, D, E, Data Inputs 9, 12, 13 F, G, H 3, 4, 10, 11 J, K, L, M Data Outputs VSS Negative Supply Voltage 7 14 VDD Positive Supply Voltage TRUTH TABLE IN1 IN2 OUT L L H H L H L H L H H L FUNCTIONAL DIAGRAM ABSOLUTE MAXIMUM RATINGS Symbol VDD Parameter Supply Voltage VI DC Input Voltage II DC Input Current PD Value Unit -0.5 to +22 V -0.5 to VDD + 0.5 ± 10 mA V 200 100 mW mW Top Power Dissipation per Package Power Dissipation per Output Transistor Operating Temperature -55 to +125 °C Tstg Storage Temperature -65 to +150 °C Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. All voltage values are referred to VSS pin voltage. 2/10 HCF4030B RECOMMENDED OPERATING CONDITIONS Symbol VDD Parameter Value Supply Voltage VI Input Voltage Top Operating Temperature Unit 3 to 20 V 0 to VDD V -55 to 125 °C DC SPECIFICATIONS Test Condition Symbol IL VOH VOL VIH VIL IOH IOL II CI Parameter VI (V) 0/5 0/10 0/15 0/20 Output High 0/5 Voltage 0/10 0/15 Output Low Voltage 5/0 10/0 15/0 Input High Voltage VO (V) |IO| VDD (µA) (V) Quiescent Current Input Low Voltage Output Drive Current Output Sink Current Input Leakage Current Input Capacitance 0/5 0/5 0/10 0/15 0/5 0/10 0/15 0/18 0.5/4.5 1/9 1.5/13.5 4.5/0.5 9/1 13.5/1.5 2.5 4.6 9.5 13.5 0.4 0.5 1.5 Value <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 Any Input Any Input 5 10 15 20 5 10 15 5 10 15 5 10 15 5 10 15 5 5 10 15 5 10 15 18 TA = 25°C Min. Typ. Max. 0.02 0.02 0.02 0.04 4 8 16 20 4.95 9.95 14.95 -40 to 85°C -55 to 125°C Min. Min. 4 8 16 20 4.95 9.95 14.95 0.05 0.05 0.05 4.95 9.95 14.95 3.5 7 11 1.5 3 4 -3.2 -1 -2.6 -6.8 1 2.6 6.8 ±0.1 5 7.5 0.05 0.05 0.05 1.5 3 4 V V 1.5 3 4 -1.1 -0.36 -0.9 -2.4 0.36 0.9 2.4 ±1 µA V 3.5 7 11 -1.15 -0.36 -0.9 -2.4 0.36 0.9 2.4 ±10-5 Max. 30 60 120 600 0.05 0.05 0.05 3.5 7 11 -1.36 -0.44 -1.1 -3.0 0.44 1.1 3.0 Max. Unit V mA mA ±1 µA pF The Noise Margin for both "1" and "0" level is: 1V min. with VDD =5V, 2V min. with VDD=10V, 2.5V min. with VDD=15V DYNAMIC ELECTRICAL CHARACTERISTICS (Tamb = 25°C, CL = 50pF, RL = 200KΩ, tr = tf = 20 ns) Test Condition Symbol Parameter tPLH tPHL Propagation Delay Time tTLH tTHL Output Transition Time VDD (V) 5 10 15 5 10 15 Value (*) Min. Unit Typ. Max. 140 65 50 100 50 40 280 130 100 200 100 80 ns ns 3/10 HCF4030B TYPICAL APPLICATION : EVEN PARITY-BIT GENERATOR TYPICAL APPLICATION : EVEN PARITY-CHECKER TYPICAL APPLICATION : ODD-PARITY-BIT GENERATOR 4/10 HCF4030B TYPICAL APPLICATION : ODD-PARITY-CHECKER TYPICAL APPLICATION : 8-BIT COMPARATOR 5/10 HCF4030B TYPICAL APPLICATION : 8-BIT TWO’S COMPLEMENT ADDER-SUBSTRACTOR (*) Typical temperature coefficient for all VDD value is 0.3 %/°C. TEST CIRCUIT CL = 50pF or equivalent (includes jig and probe capacitance) RL = 200KΩ RT = ZOUT of pulse generator (typically 50Ω) 6/10 HCF4030B WAVEFORM : PROPAGATION DELAY TIMES (f=1MHz; 50% duty cycle) 7/10 HCF4030B Plastic DIP-14 MECHANICAL DATA mm. inch DIM. MIN. a1 0.51 B 1.39 TYP MAX. MIN. TYP. MAX. 0.020 1.65 0.055 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 15.24 0.600 F 7.1 0.280 I 5.1 0.201 L Z 3.3 1.27 0.130 2.54 0.050 0.100 P001A 8/10 HCF4030B SO-14 MECHANICAL DATA DIM. mm. MIN. TYP A a1 inch MAX. MIN. TYP. 1.75 0.1 0.068 0.2 a2 MAX. 0.003 0.007 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45˚ (typ.) D 8.55 E 5.8 8.75 0.336 6.2 0.228 0.344 0.244 e 1.27 0.050 e3 7.62 0.300 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M S 0.68 0.026 8 ˚ (max.) PO13G 9/10 HCF4030B Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. © The ST logo is a registered trademark of STMicroelectronics © 2002 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. © http://www.st.com 10/10