ON MMSZ22T1G Zener voltage regulator Datasheet

MMSZxxxT1G Series,
SZMMSZxxxT1G Series
Zener Voltage Regulators
500 mW SOD−123 Surface Mount
Three complete series of Zener diodes are offered in the convenient,
surface mount plastic SOD−123 package. These devices provide a
convenient alternative to the leadless 34−package style.
http://onsemi.com
Features








500 mW Rating on FR−4 or FR−5 Board
Wide Zener Reverse Voltage Range − 2.4 V to 56 V
Package Designed for Optimal Automated Board Assembly
Small Package Size for High Density Applications
ESD Rating of Class 3 (> 16 kV) per Human Body Model
AEC−Q101 Qualified and PPAP Capable
SZ Prefix for Automotive and Other Applications Requiring Unique
Site and Control Change Requirements
Pb−Free Packages are Available*
SOD−123
CASE 425
STYLE 1
1
Cathode
2
Anode
MARKING DIAGRAM
Mechanical Characteristics
CASE: Void-free, transfer-molded, thermosetting plastic case
FINISH: Corrosion resistant finish, easily Solderable
MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES:
1
xx M G
G
260C for 10 Seconds
POLARITY: Cathode indicated by polarity band
FLAMMABILITY RATING: UL 94 V−0
xx
M
G
MAXIMUM RATINGS
Rating
Total Power Dissipation on FR−5 Board,
(Note 1) @ TL = 75C
Derated above 75C
= Device Code
= Date Code
= Pb−Free Package
(Note: Microdot may be in either location)
Symbol
PD
Max
Unit
500
6.7
mW
mW/C
ORDERING INFORMATION
Device
Package
Shipping†
Thermal Resistance, Junction−to−Ambient
(Note 2)
RqJA
340
C/W
MMSZxxxT1G
SOD−123
(Pb−Free)
3,000 /
Tape & Reel
Thermal Resistance, Junction−to−Lead
(Note 2)
RqJL
150
C/W
SZMMSZxxxT1G
SOD−123
(Pb−Free)
3,000 /
Tape & Reel
TJ, Tstg
−55 to +150
C
MMSZxxxT3G
SOD−123
(Pb−Free)
10,000 /
Tape & Reel
SZMMSZxxxT3G
SOD−123
(Pb−Free)
10,000 /
Tape & Reel
Junction and Storage Temperature Range
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. FR−5 = 3.5 X 1.5 inches.
2. Thermal Resistance measurement obtained via infrared Scan Method.
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
DEVICE MARKING INFORMATION
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
 Semiconductor Components Industries, LLC, 2012
January, 2012 − Rev. 11
1
See specific marking information in the device marking
column of the Electrical Characteristics table on page 2 of
this data sheet.
Publication Order Number:
MMSZ2V4T1/D
MMSZxxxT1G Series, SZMMSZxxxT1G Series
ELECTRICAL CHARACTERISTICS (TA = 25C unless
I
otherwise noted, VF = 0.95 V Max. @ IF = 10 mA)
Symbol
IF
Parameter
VZ
Reverse Zener Voltage @ IZT
IZT
Reverse Current
ZZT
Maximum Zener Impedance @ IZT
IR
Reverse Leakage Current @ VR
VR
Reverse Voltage
IF
Forward Current
VF
Forward Voltage @ IF
VZ VR
V
IR VF
IZT
Zener Voltage Regulator
ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted, VF = 0.9 V Max. @ IF = 10 mA)
VZ1 (Volts)
(Notes 3 and 4)
ZZT1
(Note 5)
VZ2 (Volts)
(Notes 3 and 4)
@ IZT1 = 5 mA
ZZT2
(Note 5)
Max Reverse
Leakage Current
@ IZT2 = 1 mA
IR @ VR
Device
Marking
Min
Nom
Max
W
Min
Max
W
mA
Volts
MMSZ2V4T1G
T1
2.28
2.4
2.52
100
1.7
2.1
600
50
1
MMSZ2V7T1G
T2
2.57
2.7
2.84
100
1.9
2.4
600
20
1
MMSZ3V0T1G
T3
2.85
3.0
3.15
95
2.1
2.7
600
10
1
MMSZ3V3T1G
T4
3.14
3.3
3.47
95
2.3
2.9
600
5
1
MMSZ3V6T1G
T5
3.42
3.6
3.78
90
2.7
3.3
600
5
1
MMSZ3V9T1G
U1
3.71
3.9
4.10
90
2.9
3.5
600
3
1
MMSZ4V3T1G
U2
4.09
4.3
4.52
90
3.3
4.0
600
3
1
Device*
MMSZ4V7T1G
U3
4.47
4.7
4.94
80
3.7
4.7
500
3
2
MMSZ5V1T1G
U4
4.85
5.1
5.36
60
4.2
5.3
480
2
2
MMSZ5V6T1G/T3G
U5
5.32
5.6
5.88
40
4.8
6.0
400
1
2
MMSZ6V2T1G
V1
5.89
6.2
6.51
10
5.6
6.6
150
3
4
MMSZ6V8T1G
V2
6.46
6.8
7.14
15
6.3
7.2
80
2
4
MMSZ7V5T1G
V3
7.13
7.5
7.88
15
6.9
7.9
80
1
5
MMSZ8V2T1G
V4
7.79
8.2
8.61
15
7.6
8.7
80
0.7
5
MMSZ9V1T1G
V5
8.65
9.1
9.56
15
8.4
9.6
100
0.5
6
MMSZ10T1G
A1
9.50
10
10.50
20
9.3
10.6
150
0.2
7
MMSZ11T1G
A2
10.45
11
11.55
20
10.2
11.6
150
0.1
8
MMSZ12T1G
A3
11.40
12
12.60
25
11.2
12.7
150
0.1
8
MMSZ13T1G
A4
12.35
13
13.65
30
12.3
14.0
170
0.1
8
MMSZ15T1G
A5
14.25
15
15.75
30
13.7
15.5
200
0.05
10.5
MMSZ16T1G
X1
15.20
16
16.80
40
15.2
17.0
200
0.05
11.2
MMSZ18T1G/T3G
X2
17.10
18
18.90
45
16.7
19.0
225
0.05
12.6
MMSZ20T1G
X3
19.00
20
21.00
55
18.7
21.1
225
0.05
14
MMSZ22T1G
X4
20.90
22
23.10
55
20.7
23.2
250
0.05
15.4
MMSZ24T1G
X5
22.80
24
25.20
70
22.7
25.5
250
0.05
16.8
3. The type numbers shown have a standard tolerance of 5% on the nominal Zener Voltage.
4. Tolerance and Voltage Designation: Zener Voltage (VZ) is measured with the Zener Current applied for PW = 1 ms.
5. ZZT and ZZK are measured by dividing the AC voltage drop across the device by the AC current applied.
The specified limits are for IZ(AC) = 0.1 IZ(DC), with the AC frequency = 1 kHz.
*Include SZ-prefix devices where applicable.
http://onsemi.com
2
MMSZxxxT1G Series, SZMMSZxxxT1G Series
ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted, VF = 0.9 V Max. @ IF = 10 mA)
VZ1 (Volts)
(Notes 6 and 7)
ZZT1
(Note 8)
@ IZT1 = 2 mA
VZ2 (Volts)
(Notes 6 and 7)
ZZT2
(Note 8)
Max Reverse
Leakage Current
@ IZT2 = 0.1 mA
@ IZT2 =
0.5 mA
IR @ VR
Device
Marking
Min
Nom
Max
W
Min
Max
W
mA
Volts
MMSZ27T1G/T3G
Y1
25.65
27
28.35
80
25
28.9
300
0.05
18.9
MMSZ30T1G
Y2
28.50
30
31.50
80
27.8
32
300
0.05
21
MMSZ33T1G
Y3
31.35
33
34.65
80
30.8
35
325
0.05
23.1
MMSZ36T1G
Y4
34.20
36
37.80
90
33.8
38
350
0.05
25.2
MMSZ39T1G
Y5
37.05
39
40.95
130
36.7
41
350
0.05
27.3
MMSZ43T1G
Z1
40.85
43
45.15
150
39.7
46
375
0.05
30.1
MMSZ47T1G
Z2
44.65
47
49.35
170
43.7
50
375
0.05
32.9
MMSZ51T1G
Z3
48.45
51
53.55
180
47.6
54
400
0.05
35.7
MMSZ56T1G
Z4
53.20
56
58.80
200
51.5
60
425
0.05
39.2
Device*
6. The type numbers shown have a standard tolerance of 5% on the nominal Zener Voltage.
7. Tolerance and Voltage Designation: Zener Voltage (VZ) is measured with the Zener Current applied for PW = 1 ms.
8. ZZT and ZZK are measured by dividing the AC voltage drop across the device by the AC current applied.
The specified limits are for IZ(AC) = 0.1 IZ(DC), with the AC frequency = 1 kHz.
*Include SZ-prefix devices where applicable.
http://onsemi.com
3
MMSZxxxT1G Series, SZMMSZxxxT1G Series
8
7
 VZ, TEMPERATURE COEFFICIENT (mV/C)
 VZ, TEMPERATURE COEFFICIENT (mV/C)
TYPICAL CHARACTERISTICS
TYPICAL TC VALUES
FOR MMSZxxxT1G SERIES,
SZMMSZxxxT1G SERIES
6
5
4
VZ @ IZT
3
2
1
0
−1
−2
−3
2
3
4
5
6
7
8
9
10
11
VZ @ IZT
10
10
100
VZ, NOMINAL ZENER VOLTAGE (V)
VZ, NOMINAL ZENER VOLTAGE (V)
Figure 1. Temperature Coefficients
(Temperature Range − 55C to +150C)
Figure 2. Temperature Coefficients
(Temperature Range − 55C to +150C)
Ppk , PEAK SURGE POWER (WATTS)
1000
1.0
PD versus TL
0.8
0.6
PD versus TA
0.4
0.2
0
25
50
75
100
125
RECTANGULAR
WAVEFORM, TA = 25C
100
10
1
150
0.1
1
100
1000
PW, PULSE WIDTH (ms)
Figure 3. Steady State Power Derating
Figure 4. Maximum Nonrepetitive Surge Power
1000
75 V (MMSZ5267BT1G)
91 V (MMSZ5270BT1G)
IF, FORWARD CURRENT (mA)
TJ = 25C
IZ(AC) = 0.1 IZ(DC)
f = 1 kHz
IZ = 1 mA
100
5 mA
20 mA
10
100
10
150C
1
10
T, TEMPERATURE (C)
1000
Z ZT, DYNAMIC IMPEDANCE (  )
TYPICAL TC VALUES
FOR MMSZxxxT1G SERIES,
SZMMSZxxxT1G SERIES
1
12
1.2
0
100
1
10
100
1
0.4
0.5
75C
0.6
25C
0C
0.7
0.8
0.9
1.0
VZ, NOMINAL ZENER VOLTAGE
VF, FORWARD VOLTAGE (V)
Figure 5. Effect of Zener Voltage on
Zener Impedance
Figure 6. Typical Forward Voltage
http://onsemi.com
4
1.1
1.2
MMSZxxxT1G Series, SZMMSZxxxT1G Series
TYPICAL CHARACTERISTICS
1000
1000
0 V BIAS
I R , LEAKAGE CURRENT ( A)
TA = 25C
C, CAPACITANCE (pF)
1 V BIAS
100
BIAS AT
50% OF VZ NOM
10
100
10
1
+150C
0.1
0.01
+ 25C
0.001
− 55C
0.0001
1
1
100
10
0.00001
0
10
20
30
40
50
60
VZ, NOMINAL ZENER VOLTAGE (V)
Figure 7. Typical Capacitance
Figure 8. Typical Leakage Current
TA = 25C
I Z , ZENER CURRENT (mA)
TA = 25C
I Z , ZENER CURRENT (mA)
80
100
100
10
1
0.1
0.01
70
VZ, NOMINAL ZENER VOLTAGE (V)
0
2
4
6
8
10
12
10
1
0.1
0.01
10
30
50
70
90
VZ, ZENER VOLTAGE (V)
VZ, ZENER VOLTAGE (V)
Figure 9. Zener Voltage versus Zener Current
(VZ Up to 12 V)
Figure 10. Zener Voltage versus Zener Current
(12 V to 91 V)
http://onsemi.com
5
90
MMSZxxxT1G Series, SZMMSZxxxT1G Series
PACKAGE DIMENSIONS
SOD−123
CASE 425−04
ISSUE G
D
ÂÂÂÂ
ÂÂÂÂ
A
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
A1
1
HE
DIM
A
A1
b
c
D
E
HE
L
q
E
2
MIN
0.037
0.000
0.020
--0.055
0.100
0.140
0.010
0
INCHES
NOM
0.046
0.002
0.024
--0.063
0.106
0.145
-----
MAX
0.053
0.004
0.028
0.006
0.071
0.112
0.152
--10 
STYLE 1:
PIN 1. CATHODE
2. ANODE
q
L
b
MILLIMETERS
MIN
NOM
MAX
0.94
1.17
1.35
0.00
0.05
0.10
0.51
0.61
0.71
----0.15
1.60
1.40
1.80
2.54
2.69
2.84
3.56
3.68
3.86
----0.25
--10 
0
C
SOLDERING FOOTPRINT*
ÉÉ
ÉÉ
ÉÉ
0.91
0.036
2.36
0.093
4.19
0.165
ÉÉ
ÉÉ
ÉÉ
SCALE 10:1
1.22
0.048
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
http://onsemi.com
6
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
MMSZ2V4T1/D
Similar pages