HLG-320H 320W Single Output Switching Power Supply series Features : Universal AC input / Full range (up to 305VAC) Built-in active PFC function High efficiency up to 95% Protections: Short circuit / Over current / Over voltage / Over temperature Cooling by free air convection OCP point adjustable through output cable or internal potentiometer IP67 / IP65 design for indoor or outdoor installations Three in one dimming function (1~10Vdc or PWM signal or resistance) Suitable for LED lighting and street lighting applications Compliance to worldwide safety regulations for lighting Suitable for dry / damp / wet location 5 years warranty (Note.10) 110 F HLG-320H-12 A M M SELV IP65 IP67 Blank : IP67 rated. Cable for I/O connection. A : IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer. B : IP67 rated. Constant current level adjustable through output cable with 1~10Vdc or PWM signal or resistance. C : Terminal block for I/O connection. Output voltage and constant current level can be adjusted through internal potentiometer. D (option) : IP67 rated. Timer dimming function, contact MEAN WELL for details. SPECIFICATION HLG-320H-12 HLG-320H-15 HLG-320H-20 HLG-320H-24 HLG-320H-30 HLG-320H-36 HLG-320H-42 HLG-320H-48 HLG-320H-54 12V 15V 20V 24V 30V 36V 42V 48V 54V CONSTANT CURRENT REGION Note.4 6 ~12V 7.5 ~ 15V 10 ~ 20V 12 ~ 24V 18 ~ 36V 21 ~ 42V 24 ~ 48V 27 ~ 54V RATED CURRENT 22A 19A 15A 13.34A 15 ~ 30V 10.7A 8.9A 7.65A 6.7A 5.95A RATED POWER 264W 285W 300W 320.16W 321W 320.4W 321.3W 321.6W 321.3W 150mVp-p 150mVp-p 150mVp-p 200mVp-p 250mVp-p 250mVp-p 250mVp-p 350mVp-p 17 ~ 22V 21 ~ 26V 26 ~ 32V 32 ~ 39V 38 ~ 45V 43 ~ 52V 49 ~ 58V 3.8 ~ 7.65A 3.35 ~ 6.7A 2.97 ~ 5.95A MODEL DC VOLTAGE RIPPLE & NOISE (max.) Note.2 150mVp-p VOLTAGE ADJ. RANGE Note.6 10.8 ~ 13.5V 13.5 ~ 17V OUTPUT Can be adjusted by internal potentiometer or through output cable CURRENT ADJ. RANGE 11 ~ 22A 1.5% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 1.0% 0.5% 0.5% 1.5% 2.0% Note.8 2500ms, 80ms at full load HOLD UP TIME (Typ.) VOLTAGE RANGE 15ms at full load Note.5 90 ~ 305VAC 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 230VAC /115VAC 230VAC /115VAC 127 ~ 431VDC PF>0.98/115VAC, PF>0.95/230VAC, PF>0.94/277VAC at full load (Please refer to "Power Factor Characteristic" curve) EFFICIENCY (Typ.) (230Vac) 91% 92.5% 93.5% EFFICIENCY (Typ.) (277Vac) 91.5% 93% 94% AC CURRENT (Typ.) INRUSH CURRENT(Typ.) 3.5A / 115VAC 1.65A / 230VAC COLD START 75A/230VAC 94% 94% 94.5% 94.5% 1.45A / 277VAC 94.5% 95% 95% 95% 95% 95% 95% 95% 53.5 ~ 60V 59 ~ 65V <0.75mA / 277VAC Note.4 OVER VOLTAGE 95 ~ 108% Protection type : Constant current limiting, recovers automatically after fault condition is removed Hiccup mode, recovers automatically after fault condition is removed. 33 ~ 37V 14 ~ 17V 17.5 ~ 21V 22.5 ~ 27V 27 ~ 33V 40 ~ 46V 100 10 (RTH2) Protection type : Shut down and latch off o/p voltage, re-power on to recover WORKING TEMP. -40 ~ +70 VIBRATION SAFETY STANDARDS Note.7 46.5 ~ 53V Protection type : Shut down and latch off o/p voltage, re-power on to recover OVER TEMPERATURE WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT (Refer to "Derating Curve") 20 ~ 95% RH non-condensing -40 ~ +80 0.03%/ , 10 ~ 95% RH (0 ~ 50 ) 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750, CSA C22.2 No. 250.0-08, EN61347-1, EN61347-2-13 independent (except for HLG-320H C type), IP65 or IP67 approved ; Design refer to UL60950-1, TUV EN60950-1 WITHSTAND VOLTAGE I/P-O/P:3.75KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C ( 50% load) ; EN61000-3-3 EMC EMISSION EMC IMMUNITY MTBF DIMENSION PACKING NOTE 1.0% 0.5% 47 ~ 63Hz SHORT CIRCUIT OTHERS 1.0% POWER FACTOR (Typ.) OVER CURRENT EMC 1.0% FREQUENCY RANGE LEAKAGE CURRENT SAFETY & 6.67 ~ 13.34A 5.35 ~ 10.7A 4.45 ~ 8.9A 1.0% 1.0% 1.0% 2.0% SETUP, RISE TIME PROTECTION 7.5 ~ 15A 3.0% LOAD REGULATION INPUT 9.5 ~ 19A VOLTAGE TOLERANCE Note.3 I/P-FG:1.88KVAC O/P-FG:0.5KVAC Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV), criteria A 157.1Khrs min. MIL-HDBK-217F (25 ) 252*90*43.8mm (L*W*H)(HLG-320H-Blank/A/B/D) 256*90*43.8mm (L*W*H)(HLG-320H-C) 1.88Kg; 8pcs/16Kg/0.83CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Constant current operation region is within 50% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design. 5. Derating may be needed under low input voltages. Please check the static characteristics for more details. 6. Type A and type C only. 7. Safety and EMC design refer to EN60598-1, subject CNS15233, GB7000.1, FCC part18. 8. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time. 9. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 10. Refer to warranty statement. HLG-320H 320W Single Output Switching Power Supply Mechanical Specification Case No.202A series Unit:mm Blank:(HLG-320H) 252 225.2 17 13.4 8.9 40 300 20 90 300 20 +V(Red) -V(Black) 112.6 T case SJTW 14AWG 2C SJTW 18AWG 3C 45 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) 17 4.5 4PL 43.8 T case: Max. Case Temperature. IP67 rated. Cable for I/O connection. A Type:(HLG-320H-_A) 252 225.2 17 13.4 8.9 40 300 20 90 300 20 T case 45 SJTW 18AWG 3C +V(Red) -V(Black) 112.6 Io Vo ADJ. ADJ. SJTW 14AWG 2C 4.5 4PL 17 T case: Max. Case Temperature. 43.8 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer. (Can access by removing the rubber stopper on the case.) File Name:HLG-320H-SPEC 2011-09-13 HLG-320H 320W Single Output Switching Power Supply series B Type:(HLG-320H-_B) 252 225.2 13.4 8.9 17 300 20 90 112.6 T case SJTW 14AWG 2C SJTW 18AWG 3C SJTW 18AWG) 2C 4.5 4PL 17 45 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) 40 300 20 +V(Red) -V(Black) DIM+(Blue) DIM-(White) 43.8 T case: Max. Case Temperature. C Type:(HLG-320H-_C) 256 225.2 15.4 90 2 40 1 112.6 T case 3 O/P 2 45 Io Vo ADJ. ADJ. 1 4.5 4PL 17 T case: Max. Case Temperature. 43.8 7.5 I/P 9.5 17 8 Output voltage and constant current level can be adjusted through internal potentiometer. (Can access by removing the rubber stopper on the case.) AC Input Terminal Pin No. Assignment Pin No. 1 2 3 Assignment FG AC/L AC/N DC Output Terminal Pin No. Assignment Pin No. 1 2 Assignment +V -V File Name:HLG-320H-SPEC 2011-09-13 HLG-320H 320W Single Output Switching Power Supply series D Type(option):(HLG-320H-_D) 252 225.2 17 13.4 8.9 300 20 40 300 20 +V(Red) -V(Black) 112.6 T case 90 AC/L(Brown) AC/N(Blue) FG (Green/Yellow) SJTW 14AWG 2C 45 SJTW 18AWG 3C 17 4.5 4PL 43.8 T case: Max. Case Temperature. IP67 rated. Timer dimming function, contact MEAN WELL for details. Block Diagram Fosc : 65KHz EMI FILTER & RECTIFIERS I/P RECTIFIERS & FILTER POWER SWITCHING PFC CIRCUIT +V -V DIM+ DIM(B Type) O.L.P. FG O.L.P. DETECTION CIRCUIT PWM & PFC CONTROL PFC CONTROL O.V.P. Derating Curve Static Characteristics 230VAC 100 100 90 80 80 70 100VAC LOAD (%) LOAD (%) 60 40 20 -40 -25 -10 0 15 30 50 AMBIENT TEMPERATURE ( ) 60 70 (HORIZONTAL) 60 50 40 90 100 125 135 145 155 165 175 180 200 230 305 INPUT VOLTAGE (V) 60Hz File Name:HLG-320H-SPEC 2011-09-13 320W Single Output Switching Power Supply HLG-320H series Power Factor Characteristic PF Constant Current Mode 1 0.98 0.96 0.94 0.92 0.9 0.88 0.86 0.84 277VAC 230VAC 115VAC 50% 60% 70% 80% 90% 100% (320W) LOAD EFFICIENCY vs LOAD (48V Model) HLG-320H series possess superior working efficiency that up to 95% can be reached in field applications. 97 95 EFFICIENCY (%) 93 91 89 87 277VAC 85 230VAC 83 115VAC 81 79 77 75 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD DRIVING METHODS OF LED MODULE There are two major kinds of LED drive method "direct drive" and "with LED driver". A typical LED power supply may either work in "constant voltage mode (CV) or constant current mode (CC)" to drive the LEDs. Mean Well's LED power supply with CV+ CC characteristic can be operated at both CV mode (with LED driver, at area (A) and CC mode (direct drive, at area (B). (B) Constant Current area Vo(%) 100 (A) Constant Voltage area 50 (C) Hiccup Protection 50 95 Io (%) Typical LED power supply I-V curve File Name:HLG-320H-SPEC 2011-09-13 HLG-320H 320W Single Output Switching Power Supply series DIMMING OPERATION +V(Red) -V(Black) FG (Green/Yellow) AC/L(Brown) AC/N(Blue) DIM+(Blue) DIM-(White) HLG-320H Built-in 3 in 1 dimming function, IP67 rated. Output constant current level can be adjusted through output cable by connecting a resistance or 1 ~ 10Vdc or 10V PWM signal between DIM+ and DIM-. Please DO NOT connect "DIM-" to "-V". Reference resistance value for output current adjustment (Typical) OPEN Single driver 60K 100K 20K 10K 30K 40K 50K 70K 80K 90K Resistance Multiple drivers value (N=driver quantity for synchronized 10K /N 20K /N 30K /N 40K /N 50K /N 60K /N 70K /N 80K /N 90K /N 100K /N ----- dimming operation) Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 98%~108% 1 ~ 10V dimming function for output current adjustment (Typical) Dimming value 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V OPEN Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 98%~108% 10V PWM signal for output current adjustment (Typical): Frequency range :100HZ ~ 3KHz Duty value 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% OPEN Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 98%~108% Using the built-in dimming function on B-type model can't turn the lighting fixture totally dark. Please refer to the connection method below to achieve 0% brightness of the lighting fixture connecting to the LED power supply unit. Dimming connection diagram for turning the lighting fixture ON/OFF : N FG L Switch Relay Adjuster 0~100K Ohms resistance 1~10V DC Voltage 10V PWM Signal Green/ Yellow Brown Blue AC/L HLG-320H B Type AC/N DIM+ DIMV(-) V(+) Blue White Black Red LED Lighting Fixture Using a switch and relay can turn ON/OFF the lighting fixture. 1.Output constant current level can be adjusted through output cable by connecting a resistance or 1~10Vdc or 10V PWM signal between DIM+ and DIM-. 2.The LED lighting fixture can be turned ON/OFF by the switch. File Name:HLG-320H-SPEC 2011-09-13 HLG-320H 320W Single Output Switching Power Supply series WATERPROOF CONNECTION Waterproof connector Waterproof connector can be assembled on the output cable of HLG-320H to operate in dry/wet/damp or outdoor environment. AC source HLG-320H I/P Size Pin Configuration (Female) M12 Order No. Suitable Current 4-PIN 5A/PIN M12-04 10A max. O/P Size Pin Configuration (Female) M15 5-PIN 5A/PIN M12-05 10A max. 2-PIN 12A/PIN M15-02 12A max. Order No. Suitable Current LED Lamp Cable Joiner CJ04-1 suitable for 14AWG~16AWG CJ04-2 suitable for 18AWG~22AWG 20 25 66 26 Up to four wires can be connected through this cable joiner by soldering or clamping by tools. LED Lamp HLG-320H O/P Wires CJ04 cable joiner can be purchased independently for user's own assembly. MEAN WELL order No. : CJ04-1, CJ04-2. Junction Box(Option ) 10 5 76 8.5 SJTW 18AWG 3C +V(Red) -V(Black) 32 90 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) 61 8.5 6 225.2 387.2 SJTW 14AWG 2C 2- 5 3- PF 1/2" 150 20 35 43.8 150 20 3- PF 1/2" Optional junction box available for A / Blank - type , please contact MEAW WELL for details. 86 File Name:HLG-320H-SPEC 2011-09-13