HSMC H78M24BT 3-terminal positive voltage regulator Datasheet

HI-SINCERITY
Spec. No. : Preliminary Data
Issued Date : 2001.01.01
Revised Date : 2001.05.21
Page No. : 1/3
MICROELECTRONICS CORP.
H78M24AT
H78M24BT
3-TERMINAL POSITIVE VOLTAGE REGULATOR
Description
The H78M24_T series of three-terminal positive regulators are available in
the TO-126 package. This regulator can provide local on-card regulation,
eliminating the distribution problems associated with single point regulation. Each device employs internal
current limiting, thermal shut-down and safe operating area protection, making it essentially indestructible.
If adequate heat sinking is provided, they can deliver over 0.5A output current. Although designed primarily
as fixed voltage regulators, this device can be used with external components to obtain adjustable
voltages and currents.
Description
• Output current up to 500mA is available.
• Eliminates external compensating circuit.
• Built-in current limiter prevents elements from destruction when load is short circuit.
• Built-in chip junction temperature limiting circuit protects elements against thermal destruction.
• Built-in internal power dissipation limiting circuit protects transistors at output driver.
Absolute Maximum Ratings (Ta=25°C)
• Input Voltage ................................................................................................................................... 35 V
• Total Power Dissipation (Tc=25°C) ................................................................................ Internally limited
• Operating Junction Temperature ...................................................................................... 0 °C to 125 °C
• Output Current (Tc=25°C) .............................................................................................................. 0.5 A
• Lead Temperature (Soldering 10S) .............................................................................................. 230 °C
Typical Application
Vin
1
H78M24_T
Block Diagram
3
Vout
Current
Generator
2
C1
Series pass
Element
1
Input
C2
Starting
Circuit
Reference
Voltage
3
Output
SOA
Protection
Error
Amplifier
Thermal
Protection
Note :
C1 and C2 are required if regulator is
located far from power supply filter
and load, or oscillation may induced
on the loop.
H78M15AT, H78M15BT
2
GND
HSMC Product Specification
HI-SINCERITY
Spec. No. : Preliminary Data
Issued Date : 2001.01.01
Revised Date : 2001.05.21
Page No. : 2/3
MICROELECTRONICS CORP.
Electrical Characteristics
• H78M24AT
Vin=33V, Io=350mA, 0°C≤Tj≤125°C, PD≤5W, unless otherwise specified
Symbol
Characteristic
Vo
Vo
Output Voltage (Tj=25°C)
Output Voltage (27V≤Vin≤38V, 5mA≤Io≤350mA)
Line Regulation (Tj=25°C, Io=200mA), 27V≤Vin≤38V
Regline
Line Regulation (Tj=25°C, Io=200mA), 30V≤Vin≤36V
Load Regulation (Tj=25°C), 5mA≤Io≤500mA
Regload
Load Regulation (Tj=25°C), 5mA≤Io≤200mA
IB
Quiescent Current (Tj=25°C)
Quiescent Current Change (Tj=25°C), 27V≤Vin≤38V, Io=200mA
∆IB
Quiescent Current Change (Tj=25°C), 5mA≤Io≤350mA
RR
Ripple Rejection, 28V≤Vin≤38V, Io=300mA, f=120Hz
Vi-Vo Dropout Voltage (Io=500mA, Tj=25°C)
VN
Output Noise Voltage (Tj=25°C), 10Hz≤f≤100KHz
Isc
Short Circuit Current Limit (Tj=25°C), Vin=35V
Imax Peak Output Current (Tj=25°C)
TCVo Average Temperature Coefficient of Output Voltage, Io=5mA
Min
Typ
23.28
23.04
50
-
Max
Units
24 24.72
V
24 24.96
V
20 100
mV
16
50
400
mV
200
3.2
6
mA
0.8
mA
0.5
dB
2
V
170
uV
300
mA
700
mA
-1
mV/°C
• H78M24BT
Vin=33V, Io=350mA, 0°C≤Tj≤125°C, PD≤5W, unless otherwise specified
Symbol
Vo
Vo
Characteristic
Output Voltage (Tj=25°C)
Output Voltage (27V≤Vin≤38V, 5mA≤Io≤350mA)
Line Regulation (Tj=25°C, Io=200mA), 27V≤Vin≤38V
Regline
Line Regulation (Tj=25°C, Io=200mA), 30V≤Vin≤36V
Load Regulation (Tj=25°C), 5mA≤Io≤500mA
Regload
Load Regulation (Tj=25°C), 5mA≤Io≤200mA
IB
Quiescent Current (Tj=25°C)
Quiescent Current Change (Tj=25°C), 27V≤Vin≤38V, Io=200mA
∆IB
Quiescent Current Change (Tj=25°C), 5mA≤Io≤350mA
RR
Ripple Rejection, 28V≤Vin≤38V, Io=300mA, f=120Hz
Vi-Vo Dropout Voltage (Io=500mA, Tj=25°C)
VN
Output Noise Voltage (Tj=25°C), 10Hz≤f≤100KHz
Isc
Short Circuit Current Limit (Tj=25°C), Vin=35V
Imax Peak Output Current (Tj=25°C)
TCVo Average Temperature Coefficient of Output Voltage, Io=5mA
H78M15AT, H78M15BT
Min
Typ
Max
Units
22.8 24 25.2
V
22.8 24 25.2
V
20 120
mV
16
60
400
mV
200
3.2
6
mA
1
mA
0.5
50
dB
2
V
170
uV
300
mA
700
mA
-1
mV/°C
HSMC Product Specification
HI-SINCERITY
Spec. No. : Preliminary Data
Issued Date : 2001.01.01
Revised Date : 2001.05.21
Page No. : 3/3
MICROELECTRONICS CORP.
TO-126 Dimension
D
Marking :
I
E
J
K
A
M
HSMC Logo
Part Number
Date Code
α3
B
1 2 3
Product Series
α4
G
Ink Marking
Style : Pin 1.Vin 2.Ground 3.Vout
C
F
L
H
α1
3-Lead TO-126 Plastic Package
HSMC Package Code : T
α2
*:Typical
Inches
Min.
Max.
*3°
*3°
*3°
*3°
0.1500
0.1539
0.2752
0.2791
0.5315
0.6102
0.2854
0.3039
0.0374
0.0413
DIM
α1
α2
α3
α4
A
B
C
D
E
Millimeters
Min.
Max.
*3°
*3°
*3°
*3°
3.81
3.91
6.99
7.09
13.50
15.50
7.52
7.72
0.95
1.05
DIM
F
G
H
I
J
K
L
M
Inches
Min.
Max.
0.0280
0.0319
0.0480
0.0520
0.1709
0.1890
0.0950
0.1050
0.0450
0.0550
0.0450
0.0550
*0.0217
0.1378
0.1520
Millimeters
Min.
Max.
0.71
0.81
1.22
1.32
4.34
4.80
2.41
2.66
1.14
1.39
1.14
1.39
*0.55
3.50
3.86
Notes : 1.Dimension and tolerance based on our Spec. dated Mar. 6,1995.
2.Controlling dimension : millimeters.
3.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material.
4.If there is any question with packing specification or packing method, please contact your local HSMC sales office.
Material :
• Lead : 42 Alloy ; solder plating
• Mold Compound : Epoxy resin family, flammability solid burning class:UL94V-0
Important Notice:
• All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of HSMC.
• HSMC reserves the right to make changes to its products without notice.
• HSMC semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems.
• HSMC assumes no liability for any consequence of customer product design, infringement of patents, or application assistance.
Head Office And Factory :
• Head Office (Hi-Sincerity Microelectronics Corp.) : 10F.,No. 61, Sec. 2, Chung-Shan N. Rd. Taipei Taiwan R.O.C.
Tel : 886-2-25212056 Fax : 886-2-25632712, 25368454
• Factory 1 : No. 38, Kuang Fu S. Rd., Fu-Kou Hsin-Chu Industrial Park Hsin-Chu Taiwan. R.O.C
Tel : 886-3-5983621~5 Fax : 886-3-5982931
H78M15AT, H78M15BT
HSMC Product Specification
Similar pages