THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 581-5040. PHONE (630) 851-4722. www.conwin.com PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS SURFACE MOUNT 5.0V PECL CLOCK ABSOLUTE MAXIMUM RATINGS PARAMETER TABLE 1.0 UNITS MINIMUM NOMINAL MAXIMUM UNITS -55 - 125 °C -0.5 - 7.0 Vdc Storage Temperature Supply Voltage (Vcc) MODEL SPECIFICATIONS: MODEL EH93-63* (*see options table) Center Frequency Total Frequency Tolerance TABLE 2.0 (Fo) 13 -100 - 200 100 MHz ppm MINIMUM -40 NOMINAL - MAXIMUM 85 UNITS °C Vdc OPERATING SPECIFICATIONS 1 TABLE 3.0 PARAMETER Operating Temperature Range Supply Voltage (Vcc) 4.75 5.0 5.5 Supply Current (Icc) - - 85 mA Jitter (BW=10Hz to 20MHz) - - 5 ps rms Jitter (BW=12kHz to 20MHz) - - 1 ps rms MINIMUM 3.98 45 - NOMINAL 50 - MAXIMUM 50 3.40 55 2.3 UNITS Ohms Vdc Vdc % nS PECL OUTPUT CHARACTERISTICS PARAMETER LOAD Voltage (High) (Low) Duty Cycle Rise / Fall Time 20% to 80% NOTE NOTE TABLE 3.0 (Voh) (Vol) NOTE 2 CW 0701 EH93-631 155.52M EH93-63* DESCRIPTION The Connor-Winfield EH93-63* series are fixed frequency, surface mount Crystal Controlled Oscillators (XO) designed for applications requiring low jitter and tight frequency stability. Operating at 5.0V supply voltage, the EH93-63* series provides PECL Compatible Outputs with Enable/Disable function. 3 FEATURES * I/O Options TABLE 4.0 (Add number to end of model number) 0 1 2 3 4 Pin 2 and Pin 6: No Connection. Pin 6: Complementary Output, Pin 2: No Connection. Pin 2: Enable / Disable, Pin 6: No Connection. Enable Voltage: (Vi) 3.40V Max, Disable Voltage: (Vih) 3.87V Min. Note: When oscillator is disabled the output Pin 7 is in a low state. (Vol) Pin 2: Complementary Output, Pin 6: No Connection. Pin 2: Enable / Disable, Pin 6: Complementary Output . Enable Voltage: (Vil )3.40V Max, Disable Voltage: (Vih) 3.87V Min. Note: When oscilla tor is disabled the complementary output Pin 6 is in a low state (Vol) and the output Pin 7 is in a high state. (Voh) PACKAGE CHARACTERISTICS Package TABLE 5.0 Hermetically sealed, leadless ceramic pac kage. 5.0V OPERATION DIFFERENTIAL PECL OUTPUTS LOW JITTER <1pS RMS OVERALL FREQUENCY TOLERANCE: ±100ppm INDUSTRIAL TEMPERATURE RANGE: -40 to 85°C ENABLE / DISABLE SURFACE MOUNT PACKAGE Notes 1) Includes calibration, stability vs. t emperature, supply and load variations, shock, vibration and aging (15 years). 2) Output must be terminated into 50 ohms t o Vcc – 2V or Thevenin equivalent. 3) Duty Cycle measured at 3.6V. TAPE AND REEL PACKAGING ORDERING INFORMATION EH93-631 PECL SERIES - 155.52MHz CENTER FREQUENCY Specifications subject to change without notice. DATA SHEET #: INT Ec175 PAGE 1 OF 2 REV: 01 DATE: 11/7/02 aCopyright 2001 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 581-5040. PHONE (630) 851-4722. www.conwin.com PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS Pin 1 2 3 4 5 6 7 8 9 10 Connection N/C Option Ground Vee N/C Option Q Output N/C Vcc N/C Dimensional Tolerance: ±.005 (.127mm) Specifications subject to change without notice. DATA SHEET #: INT Ec175 PAGE 2 OF 2 REV: 01 DATE: 11/7/02 aCopyright 2001 Connor-Winfield all rights reserved.