Surface Mount Bandpass Filter 50Ω BPF-B199+ 194 to 204 MHz The Big Deal • • • • Narrow band filter (BW of 5%) Excellent VSWR (1.2:1 typical) Wide stopband rejection till 2GHz (70 dB typical) Fast roll-off CASE STYLE: HZ1198 Product Overview The BPF-B199+ is a narrow-band bandpass filter in a shielded package (size of 0.472" x 0.826" x .22") fabricated using SMT technology. Covering 199 MHz ± 5 MHz band width, these units offer good matching within the passband and high rejection. This unit uses a miniature high Q capacitors and wire welded inductors for high reliability. In addition it has repeatable performance across production lots and consistent performance across temperature. Key Features Feature Advantages Narrow bandwidth filter (fractional bandwidth of 5%) Provides sharp rejection which rejects adjacent channel. Excellent VSWR, 1.2:1 typical in passband The model has very good return loss for a narrow bandwidth which provides good matching when used with other devices. More than 50dB rejection up to 2000MHz This enables the filter to attenuate spurious signals and reject harmonics for broad band of frequency. Shielded case Reduced interference with the surrounding components. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 1 of 3 Surface Mount Bandpass Filter 50Ω BPF-B199+ 194 to 204 MHz CASE STYLE: HZ1198 Features • • • • • Excellent VSWR, 1.2:1 typical in passband High rejection, 70 dB typical Sharp insertion loss roll-off Shielded case Aqueous washable Electrical Specifications at 25°C Parameter Pass Band Applications Stop Band, Lower • Harmonic rejection • Transmitters / receivers • Radio communications Stop Band, Upper Center Frequency Insertion Loss VSWR Insertion Loss VSWR Insertion Loss VSWR F# Frequency (MHz) Min. Typ. Max. Unit — F1-F2 F1-F2 — 194-204 194-204 — — — 199 4.2 1.2 — 5 1.5 MHz dB :1 DC-F3 DC-F3 DC-179 DC-179 20 — 31 24 — — dB :1 F4-F5 F4-F5 221-2000 221-2000 20 — 30 16 — — dB :1 Maximum Ratings Operating Temperature Storage Temperature RF Power Input Functional Schematic -40°C to 85°C -55°C to 100°C 0.25W max. Permanent damage may occur if any of these limits are exceeded. Typical Performance Data at 25°C Frequency (MHz) F2 F4 F5 INSERTION LOSS (dB) F1 INSERTION LOSS (dB) The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Group Delay (nsec) 91.17 73.13 72.40 53.90 32.48 17.49 10.16 4.22 3.55 3.86 5.90 13.43 30.59 50.71 75.12 76.18 78.02 74.83 55.64 78.44 91.43 51.10 62.05 64.35 27.16 9.38 4.09 1.24 1.10 1.09 1.71 5.36 17.93 41.37 173.72 133.63 102.19 86.86 82.73 75.53 194.0 194.5 195.0 195.5 196.0 196.5 197.0 197.5 198.0 198.5 199.0 199.5 200.0 200.5 201.0 201.5 202.0 202.5 203.5 204.0 55.90 55.29 54.50 53.60 52.67 51.78 50.93 50.19 49.54 49.02 48.67 48.40 48.25 48.23 48.34 48.57 48.92 49.40 50.67 51.37 BPF-B199+ INSERTION LOSS (Full band) 0 +RoHS Compliant Frequency (MHz) 3.5 20 3.8 4.1 40 4.4 194 196 198 200 202 204 60 80 250 500 750 1000 1250 1500 1750 2000 FREQUENCY (MHz) BPF-B199+ VSWR VSWR 100 1.3 1.2 10 40 60 80 150 1.1 1 175 200 225 250 FREQUENCY (MHz) 275 300 BPF-B199+ GROUP DELAY 56 GROUP DELAY (ns) 1000 20 100 125 100 0 BPF-B199+ INSERTION LOSS 0 INSERTION LOSS (dB) FREQUENCY (MHz) F3 VSWR (:1) 1.0 50.0 100.0 164.0 179.0 186.0 189.0 194.0 199.0 204.0 208.0 212.0 221.0 239.0 500.0 1000.0 1300.0 1500.0 1700.0 2000.0 Typical Frequency Response DC Insertion Loss (dB) 54 52 50 194 196 198 200 202 204 1 0 250 500 750 1000 1250 1500 1750 2000 FREQUENCY (MHz) 48 194 196 198 200 FREQUENCY (MHz) 202 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] 204 REV. A M160153 BPF-B199+ EDR-10021 RAV/URJ/NY 161230 Page 2 of 3 BPF-B199+ Bandpass Filter Pad Connections Outline Drawing INPUT 1 OUTPUT 2 GROUND PCB Land Pattern 3,4,5,6 Demo Board MCL P/N: TB-400+ Suggested PCB Layout (PL-247) Suggested Layout, Tolerance to be within ±.002 Outline Dimensions ( inch mm ) A .472 11.99 B .826 20.98 C .220 5.59 D .551 14.00 E .118 3.00 F .047 1.19 G .078 1.98 H .076 1.93 J .142 3.61 K .543 13.79 N .079 2.01 P .138 3.51 Q .162 4.11 S .098 2.49 T .096 2.44 U .217 5.51 V .067 1.70 W .157 3.99 X .866 22.00 Y .512 13.00 L .078 1.98 M .236 5.99 wt grams 6.0 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 3 of 3