Features • Highly Integrated Digital Device for DAB Receivers (Eureka 147) • Utilizes the ARM7TDMI® Core • • • • • • • • • • • • • • – High-performance 32-bit RISC Architecture – High-density 16-bit Instruction Set – Embedded ICE (In-Circuit Emulation) Utilizes TeakDSPCore™ – 16-bit Fixed-point Digital Signal Processing Core HDAB OFDM Channel Demodulator and Decoder – Fully Integrated, Supports all DAB Functions and Modes – Full Data Rate of 1.8 Mbit Can Be Decoded – Automatic Mode Detection (AMD) – Digital AFC (Frequency Tolerance < 0.5 Hz for Mode I) – Digital AGC with a Wide Gain Control Range – Demodulation and Decoding of up to 64 UEP/EEP Sub-channels Audio Source Decoder (ASD) and Data Decoder (DD) – On-chip De-interleaver Memory for Full 1.8 Mbit/s Decoding Data Rate – PAD Extraction – Two Independent Data Packet Mode Decoder Integrated High-density SRAM Supporting Time and Frequency De-interleaving 10 Msps High-speed Low-power Pipelined ADC – Supports Wide IF Range of 2.048 MHz to 50 MHz – Complex Bandpass Filtering – Optional SAW Filter Equalization ARM7TDMI Core User Software Extension – Audio Player MP3 Support Large Variety of Interfaces – I2S/SPDIF, SFCO, SSO, RDI, RS-232, USART – USB V1.1 Full Speed – Two USARTs – CAN 2.0A and 2.0B Master/Slave SPI Interface – Two Dedicated Peripheral Data Controller (PDC) Channels – 8- to 16-bit Programmable Data Length – Four External Slave Chip Selects Programmable Watchdog Timer Power Management Controller (PMC) – CPU and Peripherals Can Be De-activated Individually – Simple But Comfortable Gearing and Clocking Unit 32 User Programmable I/O Lines (PIO) Low-power Consumption for Portable Applications (3.3V and 1.8V) Robust LQFP128 Package, BGA121 Package Very Low External Component Count DAB Digital Processing Device ATR2740 Summary Preliminary NOTE: This is a summary document. The complete document is available under NDA. For more information, please contact your local Atmel sales office. 4816ES–DAB–01/07 1. Description The ATR2740 is a fully integrated processing unit which covers all DAB- (Eureka 147, ETS 300 401) related digital tasks like DAB OFDM demodulation and decoding, audio source decoding, data decoding, as well as time and frequency synchronization. The device consists of a high-performance 32-bit RISC ARM7TDMI core, an additional TeakDSPCore, embedded memories, an analog-to-digital converter (ADC), as well as a DAB channel demodulator and decoder IP, and two independent audio source decoder engines. A large variety of interfaces, including USB, SPI, USART and RDI, are provided. The ATR2740 baseband processor is controlled by a standard ARM7TDMI core, which is a very well-known controller. This allows the designers to work with standard tools, which results in reduced development costs and very fast time to market. The ARM7TDMI core is designed to perform the DAB receiver tasks, MMI and further user software extensions such as MP3 decoding or data decoding. The ATR2740 is manufactured using Atmel’s high-density CMOS technology. By combining all functions on one SoC (System-on-Chip), including a wide range of peripheral functions on a monolithic chip, the ATR2740 provides a highly flexible and cost-effective solution for DAB applications. The advanced Atmel technology and the architecture of the ATR2740 enable maximum performance at a very low current consumption. The wide flexibility offered by the ATR2740 is due to the large variety of interfaces supported. For control functions, UART, USB, and SPI are available. As data interfaces, an SSO, SFCO, US Band RDI, as well as two audio outputs (either I2S or SPDIF), are available. Due to the high integration of the device, the external component count is as low as only two external parts; a simple crystal and a 16-MB flash memory are required to run the full DAB function. All RAM, such as interleaving or program memory, as well as the ADC are incorporated into the device. The part works perfectly together with Atmel’s DAB front-end parts. The processing power available with the ATR2740 is sufficient to enable the part to decode the full DAB data rate of 1.8 Mbits. In addition, there is still unused processing power available on the ARM7TDMI controller for customer software. It is easy to run a complete MP3 player without the need to add extra hardware to the device. A complete set of tools for hardware and software, including documentation that allows easy design-in and a fast time to market, is available on request. 2 ATR2740 [Preliminary] 4816ES–DAB–01/07 ATR2740 [Preliminary] Figure 1-1. Block Diagram ATR2740 VINP VINN ADC ADC_DATA VCM DAB Channel Decoder TXRDI SFCO XO Clock Generation Advanced Power Management I2S/SPDIF Signal Processing CORE CAN USB I2S/SPDIF Watchdog SSO IRQ0 SPI IRQ1 IRQ3 Watchdog Data bus ARM7TDMI System USART1 USART2 RESET Address bus GPIO Control JTAG 3 4816ES–DAB–01/07 2. Absolute Maximum Ratings Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Parameters Symbol Min. Max. Unit Operating free air temperature range for LQFP128 –40 +85 °C Operating free air temperature range for BGA121 –10 +70 °C TStg –60 +150 °C VDD18 –0.3 +1.95 V Storage temperature DC supply voltage VDD33 –0.3 +3.6 V AVDD –0.3 +3.6 V –0.3 +1.95 V DC input voltage Notes: 1. The part may not survive if all maximums are applied simultaneously. Electrostatic sensitive device. Observe precautions for handling. 3. DC Electrical Characteristics Test conditions (if not otherwise specified): VCC = +1.8V, Tamb = +25° C No. Parameters 1.1 DC supply voltage 1.2 Low-level input voltage 1.3 Test Conditions Pin Symbol Min. Typ. Max. Unit VDD18 1.65 1.8 1.95 V VDD18 = 1.65 to 1.95V VIL –0.3 +0.3 × VDD18 V High-level input voltage VDD18 = 1.65 to 1.95V VIH +0.7 × VDD18 VDD18 + 0.3 V 1.4 Low-level output voltage IOL = 0.3 mA VDD18 = 1.65V VOL 0.1 V 1.5 High-level output voltage IOH = 0.3 mA VDD18 = 1.65V VOH 1.12 Crystal oscillator frequency VDD18 – 0.1 V 24.576 40 MHz 1.13 Clock duty cycle 1.15 USB DC supply voltage 1.16 USB input low level VILUSB 1.17 USB input high level VIHUSB 2.0 V 1.18 USB differential input sensitivity VDIUSB 0.2 V 1.19 USB differential input common mode range VCMUSB 0.8 Full speed VDD33 3 Type* 3.3 60 % 3.6 V 0.8 V 2.5 V *) Type means: A = 100% tested, B = 100% correlation tested, C = Characterized on samples, D = Design parameter 4 ATR2740 [Preliminary] 4816ES–DAB–01/07 ATR2740 [Preliminary] 3. DC Electrical Characteristics (Continued) Test conditions (if not otherwise specified): VCC = +1.8V, Tamb = +25° C No. Parameters 1.20 1.21 Test Conditions Pin Symbol Min. USB output low level VOLUSB USB output high level VOHUSB Typ. Max. Unit 0.0 0.3 V 2.8 3.6 V 1.22 Transition rise time Full speed TFR 4 20 ns 1.23 Transition fall time Full speed TFE 4 20 ns 1.24 USB crystal oscillator frequency FUSB 4 9 MHz 1.25 USB clock duty cycle 40 60 % 1.26 JTAG TCK frequency 0.02 33 MHz FTCK 8 Type* *) Type means: A = 100% tested, B = 100% correlation tested, C = Characterized on samples, D = Design parameter 4. Electrical Characteristics on ADC/IF Input Test conditions (if not otherwise specified): VCC = +3.3V, Tamb = +25° C No. Parameters 2.1 ADC DC supply voltage 2.2 IF frequency range Test Conditions Pin Symbol Min. Typ. Max. Unit AVDD 3 3.3 3.6 V FIF 2.048 50 MHz Type* *) Type means: A = 100% tested, B = 100% correlation tested, C = Characterized on samples, D = Design parameter 5. DC Power Consumption Test conditions (if not otherwise specified): VCC = +1.8V, Tamb = +25°C Mode Conditions Typ. Max. Unit Core Power Consumption DAB full Decode of all MSC’s and 1 audio sub-channel 80 mA 5 4816ES–DAB–01/07 6. Ordering Information Extended Type Number Package Remarks ATR2740-RQHH LQFP128 16 mm × 16 mm, 0.40 mm pitch, lead free ATR2740-7GHG BGA121 10 mm × 10 mm, 0.80 mm pitch, lead free 7. Package Information LQFP128 Package: LQFP 128 (acc. JEDEC OUTLINE No. MS-026) Dimensions in mm 16±0.2 3.5 ˚ ±3.5˚ 14±0.1 12.4 128 1.6 max. 97 0.1±0.05 96 0.16±0.05 0.4 1 33 64 0.6±0.15 65 32 technical drawings according to DIN specifications +0.05 0.15-0.06 Drawing-No.: 6.543-5103.01-4 Issue: 1; 15.09.03 6 ATR2740 [Preliminary] 4816ES–DAB–01/07 ATR2740 [Preliminary] 8. Package Information BGA121 Package: R-LFGBA 121_A Dimensions in mm n 0.08 m n 0.15 m A1 Corner Top View BA ∅ 0.32 ... 0.42 (121x) Bottom View 1 2 3 4 5 6 7 8 9 10 11 11 10 9 8 7 6 5 4 3 A1 Corner 21 A B C D E F G H J K L 8 10±0.05 0.8 A B C D E F G H J K L C 0.8 8 A 0.15 (4x) C 10±0.05 B 0.53 ref. technical drawings according to DIN specifications 0.2 C 0.08 C (0.26) 1.4 max Issue: 1; 20.08.04 0.22 ... 0.32 Drawing-No.: 6.580-5002.01-4 Seating plane C 7 4816ES–DAB–01/07 Atmel Corporation 2325 Orchard Parkway San Jose, CA 95131, USA Tel: 1(408) 441-0311 Fax: 1(408) 487-2600 Regional Headquarters Europe Atmel Sarl Route des Arsenaux 41 Case Postale 80 CH-1705 Fribourg Switzerland Tel: (41) 26-426-5555 Fax: (41) 26-426-5500 Asia Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimshatsui East Kowloon Hong Kong Tel: (852) 2721-9778 Fax: (852) 2722-1369 Japan 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan Tel: (81) 3-3523-3551 Fax: (81) 3-3523-7581 Atmel Operations Memory 2325 Orchard Parkway San Jose, CA 95131, USA Tel: 1(408) 441-0311 Fax: 1(408) 436-4314 RF/Automotive Theresienstrasse 2 Postfach 3535 74025 Heilbronn, Germany Tel: (49) 71-31-67-0 Fax: (49) 71-31-67-2340 Microcontrollers 2325 Orchard Parkway San Jose, CA 95131, USA Tel: 1(408) 441-0311 Fax: 1(408) 436-4314 La Chantrerie BP 70602 44306 Nantes Cedex 3, France Tel: (33) 2-40-18-18-18 Fax: (33) 2-40-18-19-60 1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906, USA Tel: 1(719) 576-3300 Fax: 1(719) 540-1759 Biometrics Avenue de Rochepleine BP 123 38521 Saint-Egreve Cedex, France Tel: (33) 4-76-58-47-50 Fax: (33) 4-76-58-47-60 ASIC/ASSP/Smart Cards Zone Industrielle 13106 Rousset Cedex, France Tel: (33) 4-42-53-60-00 Fax: (33) 4-42-53-60-01 1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906, USA Tel: 1(719) 576-3300 Fax: 1(719) 540-1759 Scottish Enterprise Technology Park Maxwell Building East Kilbride G75 0QR, Scotland Tel: (44) 1355-803-000 Fax: (44) 1355-242-743 Literature Requests www.atmel.com/literature Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDITIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life. © Atmel Corporation 2007. All rights reserved. Atmel®, logo and combinations thereof, Everywhere You Are ® and others, are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. ARM7TDMI® is a registered trademark of ARM Ltd. TeakDSPCore™ is a trademark of DSP Group Inc. Other terms and product names may be trademarks of others. 4816ES–DAB–01/07