One-Touch Locking Style Small Sized Circular Connectors CM10 Series (D6) Type ◆ OUTLINE CM10 series (D6) type is a small sized waterproof circular connector with push on locking and turnoff unlocking mechanism. The plug will be easily locked with the receptacle when you push on. Rotating the coupling ring, the plug will be unlocked when you need to unmate. The plug can not be unmated from the receptacle by such an unexpected force like the cable being pulled. CM10 with (D6) has a solid construction with the metal shell. The weight of the connector is lighter with the light metal backshell and the resin clamp nut than the CM10 series Wa t e r p r o o f IP 67 connectors which we had released earlier. CM10 series with (D6) can be used with a wide range of applications since it is small size and waterproof connector. ◆ FEATURES Lock Type Push-On ◆ SPECIFICATIONS 1. Solid structure with a metal shell 2. One touch and reliable locking mechanism of push on and turnoff 3. With a grounding contact (Position 10) 4. Angle plug available for low-profile mounting 5. Lighter in weight by 30% than CM10 Rated Voltage Dielectric Withstanding Voltage 200V AC(r.m.s.) Max. -25℃ to +85℃ Operating Temperature Range ＃ 22 Protection Rate IP67 when mated (Receptacle : Individually waterproof) Receptacle, Cable Receptacle Receptacle, Cable Receptacle ・Soldering only, 20AWG max. ・Soldering Use,：20AWG Max ◆ MATERIAL/FINISH RoHS Plug Plug ・Crimp：16AWG-20AWG ・Crimp：20AWG-28AWG ・Soldering Use,：16AWG Max. ・Soldering Use,：20AWG Max. Compliant Compliant Item Receptacle Plug Pin Front Insulator Synthetic Rubber/Black Socket Cover Insulator Plastic(UL94V-0)/Black Pin Rear Insulator Plastic(UL94V-0)/Black Socket Insulator Plastic(UL94V-0)/Black Pin Contact Copper Alloy/Gold Plating Fixed Pin Copper Alloy/Nickel Plating O Ring(Mounting Side) Synthetic Rubber/Black Socket Contact Copper Alloy/Gold Plating Receptacle Shell Zinc Alloy/Nickel Plating Coupling Ring Zinc Alloy/Nickel Plating Retaining Ring Copper Alloy/Gold Plating O Ring(Mating Side) Synthetic Rubber/Black Ground Lug Copper Alloy/Gold Plating Plug Shell Zinc Alloy/Nickel Plating Spring Stainless Steel Backshell Aluminum Alloy/Nickel Plating Bushing Synthetic Rubber/Black Cable Clamp Plastic(UL94V-0)/White Clamp Nut Plastic(UL94V-0)/Black Retaining Ring Stainless Steel Item 900V AC(r.m.s.) ／ 1 minute 1,000M Ω Min. at 500V DC Conductor Size Applicable Wire 170224 10 Contacts 3A Max. ／ Contact 1500V AC(r.m.s.) ／ 1 minute Insulation Resistance without (D6) Item 2 Contacts Item Rated Current Cable Receptacle Pin Front Insulator Synthetic Rubber/Black Pin Rear Insulator Plastic(UL94V-0)/Black Screw Stainless Steel Pin Contact Copper Alloy/Gold Plating Receptacle Shell Zinc Alloy/Nickel Plating Backshell Zinc Alloy/Nickel Plating Bushing Synthetic Rubber/Black Cable Clamp Plastic(UL94V-0)/White Clamp Nut Zinc Alloy/Nickel Plating Ground Lug Copper Alloy/Gold Plating ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp CM10 Series Unit：mm φ21 ・Contact Style : Socket ・Termination：Solder or Crimp ・The contact is sold separately. φ21 ○ 10-Contact Plug (51.4) Right Angle Plug 34 φ21 φ21 (φ21) Straight Plug (51.4) (32.5) 34 (φ21) C Straight Plug P/N Right Angle Plug P/N CM10-SP10S-S(D6) CM10-AP10S-S(D6) Cable Outside Dia. φ 4.0 〜φ 6.0 CM10-SP10S-M(D6) CM10-AP10S-M(D6) φ 6.0 〜φ 9.0 CM10-SP10S-L(D6) CM10-AP10S-L(D6) φ 9.0 〜φ 11.6 Note: The applicable cable outside diameter is in the case of cabtyre cable. CM10-D Please contact the (32.5) nearest sales office when you use a different cable. Regarding the wiring tools, please refer to the instruction manuals attached on the top-page of this connector catalogue. CM10-xP10S-D 御参考図 ○ Contact of 10-Contact Plug Loose Piece Contact Applicable Wire Contact P/N (100 pcs in 1 bag ) Item Crimping Type Soldering Type Conductor Size CM10-#22SC(C1)(D8)-100 CM10-#22SC(C2)(D8)-100 20 〜 22AWG φ 1.10 〜φ 1.87 20 AWG Max. φ 1.87 Max. 23 〜 28AWG CM10-#22SC(S1)(D8)-100 Hand Tool P/N Insulation Dia. Extraction Tool P/N 357J-50446T φ 0.80 〜φ 1.50 357J-50447T 357J-50548T 1. The packaging specification is 100 pcs of contacts per bag for sale. ２．Both of the solder contacts and the crimp contacts shall be inserted into the inserts of the connectors after soldering the contacts to the cable or crimping the contacts with the cable. Reel Contact for Semi-Automatic Crimping Machine (Crimping Style Only) Contact P/N Applicable Wire ( 5,000 pcs on 1 reel ) CM10-#22SC(C1)(D8)-5000 CM10-#22SC(C2)(D8)-5000 Conductor Size 20 〜 22AWG 23 〜 28AWG Insulation Dia. φ 1.10 〜φ 1.87 φ 0.80 〜φ 1.50 The semi-automatic crimping machine is required when you terminate the reel contacts. Semi-Automatic Crimping Machine 1set P/N Applicator AP-A50539T Extraction Tool P/N P/N AP-A50539T-1 AP-A50540T 357J-50548T AP-A50540T-1 1. Both of AP50539T and AP50540T are the set part numbers which include both of the semi-automatic crimping machines and the applicators (stripper crimpers). 2. Each of AP50539T and AP50540T contains exactly the same semi-automatic machine. Therefore if you change the applicator, you can terminate both of CM10-#22SC(C1)(D8)-5000 and CM10-#22SC(C2)(D8)-5000 by one semi-automatic crimping machine. CM10-#22SC(C1)(D8)- □□□□ CM10-#22SC(C2)(D8)- □□□□ 15.6 15.6 15.6 6 6 1.65 2.45 6 2.65 CM10-#22SC(S1)(D8)- □□□□ ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 2 数量 符号 品名 寸法 角度 (#22ｿｹｯﾄｺﾝﾀｸﾄ） CM10-#22SC(C1)（D8）-5000 承認 図番 設計 江嶋 '08. 4. 7 材質 部品名称 品名 形式 機番 一般 寸法 角度 処理・他 (#22ｿｹｯﾄｺﾝﾀｸﾄ） CM10-#22SC(C2)（D8）-5000 図番 承認 設計 江嶋 '08. 4. 7 材質 部品名称 品名 品 形式 機番 一般 寸法 角度 名 （＃２２ソケットコンタク CM10-#22SC(S1)(D8) CM10 Series Unit：mm φ21 ・Contact Style : Socket ・Termination：Solder or Crimp ・The contact is sold separately. φ21 ○ 2-Contact Plug １ ２ (51.4) Right Angle Plug １ (φ21) Straight Plug φ21 ２ 34 φ21 ２ １ (51.4) (32.5) (φ21) １ ２ 34 Straight Plug P/N Right Angle Plug P/N Cable Outside Dia. A3 CM10-SP2S-S(D6) CM10-AP2S-S(D6) φ 4.0 〜φ 6.0 CM10-SP2S-M(D6) CM10-AP2S-M(D6) φ 6.0 〜φ 9.0 CM10-SP2S-L(D6) CM10-AP2S-L(D6) φ 9.0 〜φ 11.6 CM10-D CM10-xP2S-D Note: The applicable cable outside diameter is in the case of cabtyre cable. Please contact(32.5) the nearest sales office when you use a different cable. Regarding the wiring tools, please refer to the instruction manuals attached on the top-page of this connector catalogue. 御参考図 ○ Contact of 2-Contact Plug A3 Loose Piece Contact Contact P/N Item Applicable Wire ( 100 pcs in 1 bag ) Conductor Size Insulation Dia. Crimping Type CM10-#22SC(C3)(D8)-100 16 〜 20AWG φ 1.87 〜φ 2.45 Soldering Type CM10-#22SC(S2)(D8)-100 16AWG φ 3.00 Max. Max. Hand Tool P/N Extraction Tool P/N 357J-50448T 357J-50548T 1. The packaging specification is 100 pcs of contacts per bag for sale. ２．Both of the solder contacts and the crimp contacts shall be inserted into the inserts of the connectors after soldering the contacts to the cable or crimping the contacts with the cable. Reel Contact for Semi-Automatic Crimping Machine (Crimping Style Only) Contact P/N Applicable Wire ( 4,000 pcs on 1 reel ) CM10-#22SC(C3)(D8)-4000 Conductor Size Insulation Dia. 16 〜 20AWG φ 1.87 〜φ 2.45 The semi-automatic crimping machine is required when you terminate the reel contacts. Semi-Automatic Crimping Machine 1set P/N Applicator AP-A50541T Extraction Tool P/N P/N AP-A50541T-1 357J-50548T 1. Due to the construction of CM10-#22SC-(C3)(D8)-4000 you can only make the crimping process by AP50541T. So the process of striping cable shall be made in advance. 2. AP50541T is a set part number which includes both of the semi-automatic crimping machine and the applicator (crimper). CM10-#22SC(C3)(D8)- □□□□ CM10-#22SC(S2)(D8)- □□□□ 15.6 15.6 6 4 φ2.1 6 ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 3 数量 符号 承認 図番 設計 江嶋 検図 '08. 4. 7 製写 材質 部品名称 品名 形式 機番 一般 公差 寸法 角度 処理・他 CM10-#22SC(C3)(D8)-4000 ±0.1 ±30′図番 5 （＃２２ソケットコンタクト） 処理・他 品名 改版 （＃２２ソケットコンタクト） CM10-#22SC(S2)(D8)-5000 CM10 Series Unit：mm ○ Straight Cable Receptacle Cable Outside Dia. CM10-CR10P-S φ 4.0 〜φ 6.0 CM10-CR10P-M φ 6.0 〜φ 9.0 CM10-CR10P-L φ 9.0 〜φ 11.6 ・Pin contact style only ・Soldering termination only ・Conductor Size : 20 AWG Max. ・ Insulation Dia. : φ 1.87 Max. ・Contact No.10 grounded to shell with ground lug ７ 18.9 21.0 10 Pins P/N ３ １ １０ ８ ４ （51.3） P/N Cable Outside Dia. CM10-CR2P-S φ 4.0 〜φ 6.0 CM10-CR2P-M φ 6.0 〜φ 9.0 CM10-CR2P-L φ 9.0 〜φ 11.6 ・Pin contact style only ・Soldering termination only ・Conductor Size : 20 AWG Max. 18.9 21.0 2 Pins （51.3） Note: The applicable cable outside diameter is in the case of cabtyre cable. Please contact the nearest sales office when you use a different cable. ○ Receptacle P/N 10 Pins CM10-R10P(D3)-01 P/N 2 Pins ﾒｲﾝｷｰ位置ﾏｰｸ ・Pin contact style only ・Soldering termination only ・Conductor Size : 20 AWG Max. ・Individually waterproof CM10-R2P(D3)-01 ・Pin contact style only ・Soldering termination only ・Conductor Size : 20 AWG Max. ・Individually waterproof ﾒｲﾝｷｰ位置ﾏｰｸ Contact No.10 grounded to shell with ground lug (7.9) Main key positon mark ﾒｲﾝｷｰ位置ﾏｰｸ φ12 1.7 8.4 4-M3 (13.6) □23.4 （3以上） 取付け穴寸法 (参考) +0.25 0 φ16.2 +0.2 φ12 +0.1 φ15.3 φ12 1 2 DDK 4-φ3.2 □23.4 8.4 ) □17.26 ( 1.7 (13.6) 0 □17.26±0.1 4-M3 1-0.1 3 min. Mounting Dimensions ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 4 (カタログ用図面) CM10-R2P(D3)-01 御参考図 0 1-0.1 3 min. 5.2 2 +0.25 0 +0.2 ) 0 1-0.1 □17.26±0.1 □17.26 Main key positon mark 1 φ12 +0.1 2 ( ) 4-φ3.2 (7.9) 1 DDK (13.6) □23.4 2 ( 1.7 +0.25 0 +0.2 8 DDK 1 φ16.2 10 8.4 □17.26 4-φ3.2 4 φ15.3 10 φ12 +0.1 8 1 7 φ16.2 7 3 φ15.3 3 5.2 φ12 1 4 Main key positon mark (7.9) 5.2 CM10 Series Unit：mm 23.4 φ21 ○ Mated Dimensions Receptacle ＋ Straight Plug Receptacle ＋ Right Angle Plug (52) 23.4 φ21 (33.5) φ21 (44.3) CM10-D CM10-D嵌合図 御参考図 (52) 23.4 φ21 (44.3) (33.5) ○ Dust Cap for Receptacle & Cable Receptacle P/N CM10-D CM10-D嵌合図 7 御参考図 φ16.3 Color : Red φ20.7 23.4 Material : Plastic φ14.8 CM10-R-DC DDK 2 7.9 ○ Supporting Cover Straight Plug Right Angle Plug P/N P/N CM10-SP-CV CM10-AP-D-CV 30 22.8 35.6 (53) CM10-SP-CV-A/B 外観 32 40 45 (27) 数量 符号 図番 ◎ Specifications and/or dimensions in this catalog are subject to change without 山本 notice. 江嶋 Your checking the latest specifications with our drawings would be highly appreciated. 山本 平塚 http://www.ddknet.co.jp 承認 設計 材質 部品名称 品名 形式 機番 '07.10.31 '07.10. 31 一般 製写 検図 公差 尺 '07.10.31 '07.10. 31 度 寸法 角度 CM10-SP-CV ±0.1 ±30' 図番 2:1 単 位 mm 115J-11129FA 第一電子工業株式会社 5 処理・他 (CM10ストレートプラグ用補強カバー) 5 改版 B 第３角法