Suntan MB10S Ideal for printed circuit board Datasheet

Suntan Su
®
®
MB2S THRU MB10S
Single Phase 0.8 AMPS. Glass Passivated Bridge Rectifiers
Voltage Range 200 to 1000 Volts
Current 0.8 Amperes
MBS
FEATU R E S
◆Ideal for printed circuit board
◆Reliable low cost construction technique
results in inexpensive product
◆High temperature soldering guaranteed:
260℃ / 10 seconds / 0.375” ( 9.5mm )
lead length at 5 lbs., ( 2.3 kg ) tension
◆UL Recognized File number: E347215
Mechanical Data
◆Case: Molded plastic
◆Lead: solder plated
◆Polarity: As marked
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.For capacitive load, derate current by 20%
Type Number
MB2S
MB4S
MB6S
MB8S
MB10S
UNITS
Maximum Repetitive Peak Reverse Voltage
VRRM
200
400
600
800
1000
V
Maximum RMS Voltage
VRMS
140
280
420
560
700
V
VDC
200
400
600
800
1000
V
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
On glass-epoxy P.C.B.
I(AV)
On aluminum substrate
0.5
0.8
A
Peak Forward Surge Current,
8.3ms Single Half Sine-wave Superimposed on
IFSM
35
A
VF
1.0
V
Rated Load (JEDEC method )
Maximum Instantaneous Forward Voltage at 0.4A
Maximum DC Reverse Current @ TA=25℃
Rated DC Blocking voltage per leg TA=125℃
Typical Thermal Resistance (Note1)
(Note2)
Operating Temperature Range
Storage Temperature Range
IR
5.0
500
μA
RθJA
70
RθJL
20
TJ
-55 to +150
℃
TSTG
-55 to +150
℃
Note: 1.On aluminum suvstrate P.C.B. with an area of 0.8×0.8”(20×20mm) mounted on 0.05×0.05”(1.3×1.3mm) solder pad.
2. On glass epoxy P.C.B. mouted on 0.05×0.05”(1.3×1.3mm) pads.
℃/W
Suntan Su
®
®
MB2S THRU MB10S
Single Phase 0.8 AMPS. Glass Passivated Bridge Rectifiers
Voltage Range 200 to 1000 Volts
Current 0.8 Amperes
RATING AND CHARACTERISTIC CURVES MB2S THRU MB10S
Note: Specification are subject to change without notice. For more detail and update, please visit our website.
Suntan® Technology Company Limited
Website: www.suntan.com.hk
Email: [email protected]
Tel: (852) 8202 8782
Fax: (852) 8208 6246
Similar pages