NTC Interchangeable Type 95 Series Thermometrics Thermistors Features • Precision, solid state temperature sensor • Most popular Resistance (R) vs Temperature (T) curves are available • Interchangeability down to ±0.18°F (±0.1°C) • Suitable for use over a range of -112°F to 302°F (–80°C to 150°C) • Resin-coated for good mechanical strength and resistance to solvents • Rugged construction • High sensitivity, greater than –4%/°C at 77°F (25°C) • Suitable for temperature measurement, control and compensation • High reliability and stability over an interchangeable range Amphenol Advanced Sensors • DC95: .012 in (0.3mm) diameter bare tinned copper lead wires • EC95: .008 in (0.2mm) diameter bare tinned Cu-Ni alloy lead wires • TK95: .010 in (.25mm) diameter PTFE/PFA Cu-Ni alloy lead wires Type DC95 Specifications NTC Interchangeable Thermistor Chip Epoxy-coated, NTC interchangeable thermistor chips with bare tinned copper lead wires. 1.5 in (38.1 mm) nom Tinned copper leads 0.012 in (0.3 mm) Epoxy-coated thermistor chip Options Ø 0.095 in (2.4 mm) max Consult Factory for Availability of Options • Other resistance values in the range of 1000 Ω to 100 kΩ • Other tolerances or ranges • Alternative lead wires or lengths • Non standard R vs T curves • Controlled dimensions • Special sensor assemblies or enclosures Thermal and Electrical Properties NTC Interchangeable Type DC95 dimensions Ordering Information Select appropriate part number below for resistance and temperature tolerance desired. R25°C Material System 32°F to 158°F (0°C to 70°C) ±0.18°F (±0.1°C) 32°F to 158°F (0°C to 70°C) ±0.36°F (±0.2°C) 32°F to 212°F (0 to 100°C) ±0.36°F (±0.2°C) 2000 F DC95F202V DC95F202W DC95F202Z 2252 F DC95F232V DC95F232W DC95F232Z Thermal Time Constant 3000 F DC95F302V DC95F302W DC95F302Z Still air: Stirred oil: 5000 F DC95F502V DC95F502W DC95F502Z 10000 F DC95F103V DC95F103W DC95F103Z 10000 Y DC95Y103V DC95Y103W DC95Y103Z Maximum Power at 77°F (25°C) 30000 H DC95H303V DC95H303W DC95H303Z 75 mW 50000 G DC95G503V DC95G503W DC95G503Z 100000 Y DC95Y104V DC95Y104W DC95Y104Z 100000 G DC95G104V DC95G104W DC95G104Z Dissipation Constant Still air: Stirred oil: 1 mW/°C 8 mW/°C 10 seconds 1 second De-rated from 100% at 77°F (25°C) to 0% at 212°F (100°C) Notes: 1. For RoHS compliant product, please add the suffix “N” to the part label. Example: DC95F103VN 2. For RoHS compliant product with applications below 0°C, please add the suffix “H” to the part label. Example: DC95F103VH 2 Type EC95 Specifications NTC Interchangeable Thermistor Chip Epoxy-coated, NTC interchangeable thermistor chips with bare tinned 180 alloy lead-wires. Tinned alloy 180 leads Ø 0.008 in (0.20 mm) Options 2.5 in (63.5 mm) nom Epoxy-coated thermistor chip Consult Factory for Availability of Options • Other resistance values in the range of 1000 Ω to 100 kΩ • Other tolerances or ranges • Alternative lead-wires or lengths • Non standard R vs T curves • Controlled dimensions • Special sensor assemblies or enclosures Thermal and Electrical Properties Ø 0.095 in (2.4 mm) max NTC Interchangeable Type EC95 dimensions Ordering Information Select appropriate part number below for resistance and temperature tolerance desired. Dissipation Constant Still air: Stirred oil: 1 mW/°C 8 mW/°C R25°C Material System -4°F to 122°F (-20°C to 50°C) ±0.36°F (±0.2°C) 32°F to 158°F (0°C to 70°C) ±0.18°F (±0.1°C) 32°F to 158°F (0 to 70°C) ±0.36°F (±0.2°C) 2252 F EC95F232U EC95F232V EC95F232W 3000 F EC95F302U EC95F302V EC95F302W 5000 F EC95F502U EC95F502V EC95F502W 10000 F EC95F103U EC95F103V EC95F103W 75 mW 10000 Y EC95Y103U EC95Y103V EC95Y103W 30000 H EC95H303U EC95H303V EC95H303W De-rated from 100% at 77°F (25°C) to 0% at 212°F (100°C) 50000 G EC95G503U EC95G503V EC95G503W 100000 G EC95G104V EC95G104W Thermal Time Constant Still air: Stirred oil: 10 seconds 1 second Maximum Power at 77°F (25°C) Notes: 1. For RoHS compliant product, please add the suffix “N” to the part label. Example: EC95F103VN 2. For RoHS compliant product with applications below 0°C, please add the suffix “H” to the part label. Example: EC95F103VH 3 Type TK95 Specifications Ø 0.01 in ±0.001 (0.25 mm ±0.02) 0.27 in (7 mm) max Ø 0.095 in (2.4 mm) max Insulated Lead NTC Interchangeable Thermistor Chip Ø 0.025 in (0.65 mm) max Epoxy-coated, NTC interchangeable thermistor chips with PTFE/PFA insulated nickel lead-wires. RoHS compliant. 0.195 in ±0.04 (5 mm ±1) Options 3 in (76 mm) Consult Factory for Availability of Options • Other resistance values in the range of 1000 Ω to 100 kΩ • Other tolerances or ranges • Alternative lead wires or lengths • Non standard R vs T curves • Controlled dimensions • Special sensor assemblies or enclosures Thermal and Electrical Properties NTC Interchangeable Type TK95 dimensions Ordering Information Select appropriate part number below for resistance and temperature tolerance desired. R25°C Material System 32°F to 158°F (0°C to 70°C) ±0.18°F (±0.1°C) 32°F to 158°F (0°C to 70°C) ±0.36°F (±0.2°C) 2000 F TK95F202V TK95F202W 2252 F TK95F232V TK95F232W 3000 F TK95F302V TK95F302W 5000 F TK95F502V TK95F502W 10000 F TK95F103V TK95F103W 10000 Y TK95Y103V TK95Y103W 30000 H TK95H303V TK95H303W 50000 G TK95G503V TK95G503W 100000 G TK95G104V TK95G104W Dissipation Constant Still air: Stirred oil: 1.5 mW/°C 8 mW/°C Thermal Time Constant Still air: Stirred oil: 10 seconds 1 second Maximum Power at 77°F (25°C) 75 mW De-rated from 100% at 77°F (25°C) to 0% at 212°F (100°C) Amphenol Advanced Sensors Ø 0.095 in (2.4 mm) max Note: For RoHS compliant product, please add the suffix “N” to the part label. Example: TK95F103VN www.amphenol-sensors.com © 2016 Amphenol Corporation. All Rights Reserved. Specifications are subject to change without notice. Other company names and product names used in this document are the registered trademarks or trademarks of their respective owners. AAS-920-273F 10/2016