LLF Series Vertical Fast Lift Float switches Operates in 10mm minimum liquid 50mm & 200mm length versions Vertical mount M12 or M16 Many variants are UL recognised components File No. E171218 Will operate in low SG (0.45) Technical Specification Material Stem Float The LLF series of vertical float switches have been developed for applications where very low liquid levels need to be detected. The LLF uses a large diameter Buna float to allow operation in SG as low as 0.45. The switch is capable of operating in as low as 6mm of water. Two standard lengths are available with either make on rise or make on fall switching action. Typical uses include drip tanks, hatch alarms and other applications where highly sensitive liquid detection is required. LLF59 Nylon Buna LLF69 PPS Buna Temp. Range °C °F Min. Fluid SG Must close level (SG=1) Must open level (SG=1) -20 / +75 -4 ./ +167 0.45 10mm 12mm Electrical Specification Contact Form Switching Power Max VA Switching Voltage AC Max V Switching Voltage DC Max V Switching Current Max A All ratings are for resistive load only. N/O (N/C) 25 240 120 0.6 Standard Parts LLF59Y100JC LLF59Y100JC004 LLF69A198 LLF69B198 Approvals UL UL UL UL Material Nylon/Buna Nylon/Buna PPS/Buna PPS/Buna Switch Action Make on rise Make on fall Make on rise Make on fall Leadouts 100cm 2 core PVC 7/0.2 100cm 2 core PVC 7/0.2 100cm 2 core PVC 7/0.2 100cm 2 core PVC 7/0.2 Gasket Nitrile Nitrile Nitrile Nitrile Custom versions can be made for particular applications. Please contact Cynergy3 with your requirements. Mechanical Dimensions (mm) Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Email:[email protected] LLF59 ISO9001 C E R T I F I E D LLF69 www.cynergy3.com © 2014 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.