MITSUBISHI INSULATED GATE BIPOLAR TRANSISTOR CT20VSL-8 STROBE FLASHER USE CT20VSL-8 OUTLINE DRAWING r Dimensions in mm 4.5 1.5MAX. 10.5MAX. 0 +0.3 –0 (1.5) 3.0 +0.3 –0.5 1.5MAX. 8.6 ± 0.3 9.8 ± 0.5 1.3 1 5 0.5 2.6 ± 0.4 4.5 0.8 q w e wr q GATE w COLLECTOR e EMITTER r COLLECTOR q ¡VCES ............................................................................... 400V ¡ICM ................................................................................... 130A e TO-220S APPLICATION Strobe Flasher. MAXIMUM RATINGS Symbol (Tc = 25°C) Parameter Conditions VCES VGES VGEM Collector-emitter voltage Gate-emitter voltage Peak gate-emitter voltage VGE = 0V VCE = 0V, See notice 4 VCE = 0V, tw = 10s ICM Tj Tstg Collector current (Pulsed) Junction temperature Storage temperature See figure 1 ELECTRICAL CHARACTERISTICS Ratings Unit 400 ±15 ±16 V V V 130 –40 ~ +150 –40 ~ +150 A °C °C (Tj = 25°C) Symbol Parameter V(BR)CES ICES Collector-emitter breakdown voltage Collector-emitter leakage current IGES VGE(th) Gate-emitter leakage current Gate-emitter threshold voltage Test conditions Limits IC = 1mA, VGE = 0V VCE = 400V, VGE = 0V Min. 450 — Typ. — — Max. — 10 VGE = ±16V, VCE = 0V VCE = 10V, IC = 1mA — 0.5 — — ±0.1 2.0 Unit V µA µA V Feb.1999 MITSUBISHI INSULATED GATE BIPOLAR TRANSISTOR CT20VSL-8 STROBE FLASHER USE PULSE COLLECTOR CURRENT ICM (A) PERFORMANCE CURVES MAXIMUM PULSE COLLECTOR CURRENT 160 CM = 400µF 120 < 50°C TC = 80 40 < 70°C TC = 0 0 4 8 12 16 GATE-EMITTER VOLTAGE VGE (V) Figure 1 APPLICATION EXAMPLE TRIGGER Vtrig SIGNAL IXe CM + – Vtrig VCM IGBT GATE VG VOLTAGE RG VCE Xe TUBE CURRENT VG Ixe IGBT RECOMMEND CONDITION MAXIMUM CONDITION VCM = 330V IP = 120A CM = 300µF VGE = 12V 350V 130A 400µF Notice 1. Gate drive voltage during on-period must be applied to satisfy the rating of maximum pulse collector current. And reverse gate current during turn-off must be kept less than 0.5A. (In general, it is satisfied if RG ≥ 47Ω) Notice 2. IGBT has MOS structure and its gate is insulated by thin silicon oxide. So please handle carefully not to suffer from electrostatic charge. Notice 3. The operation life should be endured 5,000 shots under the charge current (Ixe ≤ 130A : full luminescence condition) of main condenser (CM=400µF). Repetition period under full luminescence condition is over 3 seconds. Notice 4. Total operation hours must be applied within 5,000 hours. Feb.1999