TDK MLG060312NJT Smd inductors(coils) for high frequency(multilayer) Datasheet

(1/6)
SMD Inductors(Coils)
For High Frequency(Multilayer)
Conformity to RoHS Directive
MLG Series MLG0603Q Type
FEATURES
• It serializes a product of acquisition inductance 0.3 to15nH. In a
product of 0.3 to 1.0nH, it realizes line up in a 0.1nH steppe.
• By the most suitable design, Q is higher than competing in a
conventional product MLG0603S type. In particular, Q in more
than 800MHz largely improved.
• Advanced monolithic structure is formed using a multilayering
and sintering process with ceramic and conductive materials for
high-frequency.
• The products contain no lead and also support lead-free
soldering.
APPLICATIONS
For high-frequency applications including mobile phones, high
frequency modules (PA, VCO, FEM etc.), Bluetooth, W-LAN, UWB
and tuners.
PRODUCT IDENTIFICATION
MLG 0603 Q 2N2 S T
(1)
(2) (3) (4) (5) (6)
(1) Multilayer ceramic chip coil
(2) Dimensions
0603
(3) Series name
(4) Inductance value
2N2
12N
0.3±0.03
0.6±0.03
2.2nH
12nH
(5) Inductance tolerance
B
C
S
H
J
SHAPES AND DIMENSIONS
0.6× 0.3mm (L× W)
±0.1nH
±0.2nH
±0.3nH
±3%
±5%
(6) Packaging style
T
Taping (reel)
0.06±0.04
SPECIFICATIONS
0.3±0.03
Operating temperature range
Storage temperature range
Weight: 0.2mg
0.15±0.05
Dimensions in mm
0.25 to 0.35
RECOMMENDED PC BOARD PATTERN
0.2 to 0.3 0.25 to 0.35 0.2 to 0.3
Dimensions in mm
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
10s max.
–55 to +125°C
–55 to +125°C [Unit of products]
PACKAGING STYLE AND QUANTITIES
Packaging style
Taping
Quantity
15000 pieces/reel
HANDLING AND PRECAUTIONS
• Before soldering, be sure to preheat components.
The preheating temperature should be set so that the
temperature difference between the solder temperature and
product temperature does not exceed 150°C.
• After mounting components onto the printed circuit board, do not
apply stress through board bending or mishandling.
• When hand soldering, apply the soldering iron to the printed
circuit board only. Temperature of the iron tip should not exceed
350°C. Soldering time should not exceed 3 seconds.
250 to 260˚C
Natural
cooling
230˚C
180˚C
150˚C
Preheating
60 to 120s
Soldering
30 to 60s
Time(s)
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• Please contact our Sales office when your application are considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
• All specifications are subject to change without notice.
003-01 / 20070703 / e521_mlg0603q.fm
(2/6)
ELECTRICAL CHARACTERISTICS
Inductance
(nH)
Inductance
tolerance
Q
min.
Test frequency
L, Q (MHz)
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
12
15
±0.1, ±0.2nH
±0.1, ±0.2nH
±0.1, ±0.2nH
±0.1, ±0.2nH
±0.1, ±0.2nH
±0.1, ±0.2nH
±0.1, ±0.2nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±3%, ±0.3nH
±3%, ±0.3nH
±3%, ±0.3nH
±3%, ±0.3nH
±3%, ±0.3nH
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
—
—
—
—
—
—
—
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
Self-resonant
frequency
(GHz)
min.
typ.
10.0
20up
10.0
20up
10.0
20up
10.0
20up
10.0
20up
10.0
17.5
10.0
16.3
10.0
14.2
10.0
14.9
10.0
14.7
10.0
13.6
9.0
12.0
9.0
10.7
9.0
11.3
8.5
10.0
8.5
10.3
7.5
8.9
7.5
9.4
7.5
8.8
7.5
9.3
7.5
10.0
7.5
9.3
7.0
9.1
6.5
8.0
6.5
7.7
6.2
7.9
6.2
7.6
6.0
7.4
6.0
7.2
6.0
7.1
5.8
7.1
5.8
7.1
5.8
6.8
5.8
7.4
5.8
7.4
5.8
7.3
5.8
7.3
5.8
7.1
5.2
6.4
5.2
6.9
5.0
6.0
4.2
5.5
4.2
5.3
4.2
5.5
3.8
4.8
3.8
4.9
3.6
4.4
3.6
4.7
3.0
3.8
3.0
3.8
DC resistance
(Ω)
max.
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.15
0.15
0.15
0.15
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.35
0.35
0.40
0.40
0.40
0.40
0.40
0.45
0.50
0.50
0.55
0.60
0.70
0.70
0.80
0.80
1.00
1.10
typ.
0.02
0.02
0.02
0.03
0.04
0.03
0.04
0.06
0.06
0.05
0.05
0.06
0.08
0.08
0.08
0.09
0.08
0.09
0.09
0.08
0.17
0.14
0.17
0.13
0.11
0.14
0.13
0.12
0.15
0.15
0.15
0.15
0.18
0.20
0.23
0.23
0.24
0.23
0.21
0.25
0.30
0.28
0.32
0.34
0.36
0.44
0.49
0.52
0.56
0.69
Rated current
(mA)max.
Part No.
600
600
600
600
600
600
600
600
550
550
550
550
550
500
500
500
500
500
500
500
450
450
450
450
450
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
250
250
250
250
220
220
200
200
180
180
MLG0603Q0N3∗ T
MLG0603Q0N4T
MLG0603Q0N5T
MLG0603Q0N6T
MLG0603Q0N7T
MLG0603Q0N8T
MLG0603Q0N9T
MLG0603Q1N0T
MLG0603Q1N1T
MLG0603Q1N2T
MLG0603Q1N3T
MLG0603Q1N4T
MLG0603Q1N5T
MLG0603Q1N6T
MLG0603Q1N7T
MLG0603Q1N8T
MLG0603Q1N9T
MLG0603Q2N0T
MLG0603Q2N1T
MLG0603Q2N2T
MLG0603Q2N3T
MLG0603Q2N4T
MLG0603Q2N5T
MLG0603Q2N6T
MLG0603Q2N7T
MLG0603Q2N8T
MLG0603Q2N9T
MLG0603Q3N0T
MLG0603Q3N1T
MLG0603Q3N2T
MLG0603Q3N3T
MLG0603Q3N4T
MLG0603Q3N5T
MLG0603Q3N6T
MLG0603Q3N7T
MLG0603Q3N8T
MLG0603Q3N9T
MLG0603Q4N0T
MLG0603Q4N3T
MLG0603Q4N7T
MLG0603Q5N1T
MLG0603Q5N6T
MLG0603Q6N2T
MLG0603Q6N8T
MLG0603Q7N5T
MLG0603Q8N2T
MLG0603Q9N1T
MLG0603Q10NT
MLG0603Q12NT
MLG0603Q15NT
: Please specify inductance tolerance, B (±0.1nH), C (±0.2nH), S (±0.3nH), H (±3%) or J (±5%).
• Test equipment
Inductance Q : HP4291A+16197A, or equivalent
SRF: HP8720C, or equivalent
Rdc: YOKOGAWA TYPE7561, or equivalent
• Rated current : Value obtained when current flows and temperature has risen to under 20°C.
∗
• All specifications are subject to change without notice.
003-01 / 20070703 / e521_mlg0603q.fm
(3/6)
L, Q vs. FREQUENCY CHARACTERISTICS
Part No.
MLG0603Q0N3
MLG0603Q0N4
MLG0603Q0N5
MLG0603Q0N6
MLG0603Q0N7
MLG0603Q0N8
MLG0603Q0N9
MLG0603Q1N0
MLG0603Q1N1
MLG0603Q1N2
MLG0603Q1N3
MLG0603Q1N4
MLG0603Q1N5
MLG0603Q1N6
MLG0603Q1N7
MLG0603Q1N8
MLG0603Q1N9
MLG0603Q2N0
MLG0603Q2N1
MLG0603Q2N2
MLG0603Q2N3
MLG0603Q2N4
MLG0603Q2N5
MLG0603Q2N6
MLG0603Q2N7
MLG0603Q2N8
MLG0603Q2N9
MLG0603Q3N0
MLG0603Q3N1
MLG0603Q3N2
MLG0603Q3N3
MLG0603Q3N4
MLG0603Q3N5
MLG0603Q3N6
MLG0603Q3N7
MLG0603Q3N8
MLG0603Q3N9
MLG0603Q4N0
MLG0603Q4N3
MLG0603Q4N7
MLG0603Q5N1
MLG0603Q5N6
MLG0603Q6N2
MLG0603Q6N8
MLG0603Q7N5
MLG0603Q8N2
MLG0603Q9N1
MLG0603Q10N
MLG0603Q12N
MLG0603Q15N
Inductance(nH)typ.
500MHz
800MHz
0.3
0.3
0.4
0.4
0.5
0.5
0.6
0.6
0.7
0.6
0.7
0.7
0.8
0.8
0.9
0.9
1.0
1.0
1.1
1.1
1.2
1.2
1.3
1.3
1.4
1.4
1.5
1.5
1.6
1.6
1.7
1.7
1.8
1.8
1.9
1.9
2.0
2.0
2.0
2.0
2.2
2.2
2.3
2.3
2.4
2.4
2.5
2.4
2.5
2.5
2.6
2.6
2.7
2.7
2.8
2.8
2.9
2.9
3.0
3.0
3.1
3.1
3.2
3.2
3.3
3.3
3.4
3.4
3.5
3.5
3.6
3.6
3.7
3.7
3.8
3.8
4.1
4.1
4.4
4.4
4.9
4.9
5.3
5.4
5.9
5.9
6.4
6.4
7.1
7.2
7.8
7.8
8.7
8.8
9.5
9.6
11.5
11.7
14.3
14.6
1.8GHz
0.3
0.4
0.45
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
4.0
4.3
4.6
5.1
5.7
6.4
6.9
8.1
8.5
9.9
10.8
14.3
17.4
2.0GHz
0.3
0.4
0.45
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.4
4.7
5.3
5.9
6.6
7.1
8.5
8.8
10.4
11.3
15.5
18.8
2.4GHz
0.3
0.4
0.45
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.1
2.1
2.3
2.4
2.5
2.6
2.7
2.8
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.2
4.6
4.9
5.5
6.2
7.1
7.6
9.4
9.5
11.5
12.5
18.8
22.2
Q typ.
500MHz
17
17
15
17
17
17
18
18
16
17
17
17
17
18
19
18
20
18
19
16
17
18
18
18
17
19
19
19
18
18
18
18
17
16
18
17
17
18
17
16
17
18
17
17
17
16
17
16
16
17
800MHz
22
22
20
22
22
23
23
23
20
21
21
22
21
23
24
23
25
23
24
20
23
23
23
23
22
24
24
24
23
23
23
23
22
21
23
23
22
23
22
21
22
23
22
21
22
20
21
21
20
21
1.8GHz
36
34
31
34
35
36
36
36
32
33
33
34
33
36
38
35
40
36
37
31
36
36
35
35
33
36
36
35
34
34
34
33
32
32
34
34
33
34
32
32
32
32
31
30
29
28
27
27
24
26
2.0GHz
37
35
33
36
36
37
38
38
34
34
35
36
35
38
40
37
42
38
39
33
37
38
37
37
34
37
37
36
36
35
35
35
33
34
35
35
35
35
33
33
33
33
31
31
30
28
27
28
23
26
2.4GHz
42
39
37
39
41
42
42
43
38
39
39
41
39
42
45
41
47
42
43
36
42
42
40
40
38
41
40
39
38
38
38
37
36
37
38
38
38
38
36
36
36
35
33
33
30
29
27
28
21
24
• All specifications are subject to change without notice.
003-01 / 20070703 / e521_mlg0603q.fm
(4/6)
TYPICAL ELECTRICAL CHARACTERISTICS
INDUCTANCE vs. FREQUENCY CHARACTERISTICS
Q vs. FREQUENCY CHARACTERISTICS
50
100
1.0nH
40
10
2.7nH
10nH
10nH
30
Q
Inductance (nH)
15nH
2.7nH
20
1
1.0nH
15nH
10
0
10
100
1000
Frequency(MHz)
10000
0
10
100
1000
Frequency(MHz)
10000
• All specifications are subject to change without notice.
003-01 / 20070703 / e521_mlg0603q.fm
(5/6)
MLG Series MLG0603M Type (For Wireless LAN & Bluetooh)
FEATURES
• Nominal inductance values are supported from 0.6 to 10nH.
• Provides high Q characteristics.
• Advanced monolithic structure is formed using a multilayering
and sintering process with ceramic and conductive materials for
high-frequency.
• The products contain no lead and also support lead-free
soldering.
• It is a product conforming to RoHS directive.
APPLICATIONS
The most suitable in high frequency circuit of 2.4GHz and 5GHz
wireless LAN & Bluetooh.
PRODUCT IDENTIFICATION
MLG 0603 M 2N2 B T
(1)
(2) (3) (4) (5) (6)
(1) Series name
(2) Dimensions
0603
0.6× 0.3mm (L× W)
(3) Material code
(4) Inductance value
2N2
5N6
2.2nH
5.6nH
(5) Inductance tolerance
B
H
SHAPES AND DIMENSIONS
±0.1nH
±3%
0.6±0.03
(6) Packaging style
0.3±0.03
T
Taping (reel)
SPECIFICATIONS
Operating temperature range
Storage temperature range
0.06±0.04
–55 to +125°C
–55 to +125°C [Unit of products]
0.3±0.03
PACKAGING STYLE AND QUANTITIES
Weight: 0.2mg
0.15±0.05
Dimensions in mm
0.25 to 0.35
RECOMMENDED PC BOARD PATTERN
0.2 to 0.3 0.25 to 0.35 0.2 to 0.3
Dimensions in mm
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
Packaging style
Taping
Quantity
15000 pieces/reel
HANDLING AND PRECAUTIONS
• Before soldering, be sure to preheat components.
The preheating temperature should be set so that the
temperature difference between the solder temperature and
product temperature does not exceed 150°C.
• After mounting components onto the printed circuit board, do not
apply stress through board bending or mishandling.
• When hand soldering, apply the soldering iron to the printed
circuit board only. Temperature of the iron tip should not exceed
300°C. Soldering time should not exceed 3 seconds.
10s max.
250 to 260˚C
Natural
cooling
230˚C
180˚C
150˚C
Preheating
60 to 120s
Soldering
30 to 60s
Time(s)
• All specifications are subject to change without notice.
003-01 / 20070703 / e521_mlg0603q.fm
(6/6)
PACKAGING STYLES
REEL DIMENSIONS
ø60±2.0
1.0
2.0±0.5
9.0±0.3
ø13±0.5
13.0±1.4
ø21±0.8
ø178±2.0
Dimensions in mm
Cavity
3.5±0.05
1.5 +0.1
–0.0
0.5max.
0.38±0.05
4.0±0.1
2.0±0.05
160min.
Taping
2.0±0.05
0.68±0.05
8.0±0.3
Sprocket hole
1.75±0.1
TAPE DIMENSIONS
200min.
Drawing direction
300min.
Dimensions in mm
• All specifications are subject to change without notice.
003-01 / 20070703 / e521_mlg0603q.fm

Open as PDF

Similar pages