Technical Data Sheet for NL1507 Single-Stage Thermoelectric Module NOMINAL PERFORMANCE IN NITROGEN Hot Side Temperature (°C) Δ Tmax (°C): Qmax (watts): Imax (amps): Vmax (vdc): AC Resistance (ohms): PRODUCT FEATURES • • • • 27 64 5.4 1.8 4.7 2.30 50 72 6.2 1.8 5.4 -- ORDERING OPTIONS RoHS EU Compliant Pretinned metallized ceramic surface(s) with 96°C or 117°C solder. Thermistor mounted on edge of cold side ceramic. (Calibration available.) Elevated temperature burn-in with test data provided. Model Number NL1507-03AC NL1507-04AC Description 4mm Thru Hole 4mm Thru Hole, Inspected for Alignment OPERATION CAUTIONS INSTALLATION For maximum reliability, storage and operation below 85°C in a non-condensing environment is recommended. To minimize thermal stress, use linear/proportional temperature control or a similar method rather than an ON/OFF method. [Use this statement for TEM <19mm length:] Recommended mounting methods: Bonding with thermal epoxy or soldering with metallized ceramics. For additional information, please refer to our TEM Installation Guide. II-VI Marlow – Dallas, TX USA 214-340-4900 877-627-5691 [email protected] Marlow Industries Europe GmbH - Germany +49 (0) 6150 5439 - 403 [email protected] II-VI Japan Inc. 81 43 297 2693 (tel) [email protected] www.ii-vi.co.jp MI Form 005-0808 Rev. B www.marlow.com II-VI Singapore Pte., Ltd. (65) 6481 8215 (tel) [email protected] Marlow Industries China, II-VI Technologies Beijing 86-10-643 98226 [email protected] DOC # 102-0328 REV M - PAGE 1 OF 2 80.0 0.00 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 40.0 20.0 80.0 40.0 20.0 0.0 0.0 5.0 5.0 4.0 3.0 2.0 Q=0 T=0 1.0 0.0 0.0 0.4 0.8 1.2 1.6 CURRENT (AMPS) 2.0 HEAT LOAD (WATTS) 0.00 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 5.50 60.0 VOLTAGE (VDC) T (C) 60.0 Hot Side Temperature 50°C HEAT LOAD (WATTS) T (C) Hot Side Temperature 27°C VOLTAGE (VDC) TYPICAL PERFORMANCE CURVES ENVIRONMENT: ONE ATMOSPHERE DRY NITROGEN 4.0 3.0 2.0 Q=0 T=0 1.0 0.0 0.0 0.4 0.8 1.2 1.6 CURRENT (AMPS) 2.0 MECHANICAL CHARACTERISTICS For performance information in a vacuum or with hot side temperatures other than 27°C or 50°C, contact one of our Applications Engineers at 877-627-5691. All units are in inches, [ ] are in millimeters unless otherwise stated. For customer support or general questions please contact a local office or visit our website at www.marlow.com. Marlow reserves the right to make product changes without notice. MI Form 005-0808 Rev. B www.marlow.com DOC # 102-0328 REV M - PAGE 2 OF 2