Diodes DDTC113TLP-7 Pre-biased small signal surface mount npn transistor Datasheet

DDTC113TLP
PRE-BIASED SMALL SIGNAL SURFACE MOUNT NPN TRANSISTOR
Please click here to visit our online spice models database.
NEW PRODUCT
Features
•
•
•
•
•
•
Epitaxial Planar Die Construction
Ultra-Small Leadless Surface Mount Package
Ideally Suited for Automated Assembly Processes
Lead Free By Design/RoHS Compliant (Note 1)
"Green" Device (Note 2)
Qualified to AEC-Q101 Standards for High Reliability
1
•
•
•
•
•
•
2E
3
C
1B
Mechanical Data
•
•
2
3
Bottom View
Case: DFN1006-3
Case Material: Molded Plastic. "Green Molding"
Compound. UL Flammability Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020D
Terminal Connections: Collector Dot (See Diagram and
Marking Information)
Terminals: Finish - NiPdAu over Copper leadframe.
Solderable per MIL-STD-202, Method 208
Marking Code N4, Dot denotes Collector Side
Ordering Information: See Page 3
Weight: 0.0009 grams (approx.)
Maximum Ratings
Top View
DFN1006-3
1
B
C 3
IN
1
10 KÙ
C
B
1
3
E
E
2
OUT
GND
2
Equivalent Inverter Circuit
Schematic and Pin Configuration
@TA = 25°C unless otherwise specified
Characteristic
Supply Voltage
Input Voltage
Output Current (IO)
Symbol
VCC
VIN
IC(max)
Value
50
-5 to +10
100
Unit
V
V
mA
Symbol
PD
Pder
Value
250
2
Unit
mW
mW/°C
RθJA
500
°C/W
Tj, TSTG
-55 to +150
°C
Thermal Characteristics
Characteristic
Power Dissipation (Note 3) @TA = 25
Power Derating above 25°C
Thermal Resistance, Junction to Ambient Air (Note 3) @TA = 25
(Equivalent to one heated junction of NPN)
Operating and Storage Temperature Range
Electrical Characteristics
@TA = 25°C unless otherwise specified
Characteristic
OFF CHARACTERISTICS (Note 4)
Collector-Base Breakdown Voltage
Collector-Emitter Breakdown Voltage
Emitter-Base Breakdown Voltage
Collector-Base Cutoff Current
Emitter-Base Cutoff Current
ON CHARACTERISTICS (Note 4)
DC Current Gain
Collector-Emitter Saturation Voltage
Input Resistance
SMALL SIGNAL CHARACTERISTICS
Current Gain-Bandwidth Product
Symbol
Min
Typ
Max
Unit
V(BR)CBO
V(BR)CEO
V(BR)EBO
ICBO
IEBO
50
50
5
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
0.5
0.5
V
V
V
μA
μA
IC = 10μA, IE = 0
IC = 1.0mA, IB = 0
IE = 50μA, IC = 0
VCB = 50V, IE = 0
VEB = 4V, IC = 0
hFE
VCE(SAT)
R1
100
⎯
0.7
380
⎯
1
600
0.25
1.3
⎯
V
KΩ
VCE = 5V, IC = 1mA
IC = 50mA, IB = 2.5mA
⎯
fT
⎯
250
⎯
MHz
Notes:
Test Condition
VCE = 10V, IE = 5mA, f = 100MHz
1. No purposefully added lead.
2. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php.
3. Device mounted on FR-4 PCB, 1 inch x 0.85 inch x 0.062 inch; pad layout as shown on page 3 or Diodes Inc. suggested pad layout document
AP02001 on our website at http://www.diodes.com/datasheets/ap02001.pdf.
4. Short duration pulse test used to minimize self-heating effect.
DS30843 Rev. 7 - 2
1 of 3
www.diodes.com
DDTC113TLP
© Diodes Incorporated
IC, COLLECTOR CURRENT (A)
PD , POWER DISSIPATION (mW)
NEW PRODUCT
0.12
0.10
0.08
0.06
0.04
0.02
RθJA = 500 °C/W
0.0
0
1
2
3
5
6
4
VCE, COLLECTOR-EMITTER VOLTAGE (V)
Fig. 2 Typical Collector Current vs. Collector-Emitter Voltage
TA, AMBIENT TEMPERATURE (°C)
Fig. 1 Power Dissipation vs. Ambient Temperature (Note 3)
0.25
800
700
0.2
600
0.15
500
400
0.1
0.05
0
7
10
6
5
1
4
3
0.1
2
1
0
DS30843 Rev. 7 - 2
0.01
2 of 3
www.diodes.com
0
0.2
0.4
0.6
0.8
1
1.2
1.4
DDTC113TLP
© Diodes Incorporated
Ordering Information
(Note 5)
Packaging
DFN1006-3
NEW PRODUCT
Device
DDTC113TLP-7
Notes:
5.
Shipping
3000/Tape & Reel
For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
Marking Information
N4 = Product Type Marking Code
Dot Denotes Collector, Pin 3
N4
Mechanical Details
DFN1006-3
Dim Min
Max Typ
A
0.95 1.075 1.00
B
0.55 0.675 0.60
C
0.45
0.55 0.50
D
0.20
0.30 0.25
G
0.47
0.53 0.50
H
0
0.05 0.03
K
0.10
0.20 0.15
L
0.20
0.30 0.25
M
0.35
⎯
⎯
N
0.40
⎯
⎯
All Dimensions in mm
G
H
A
K
B C
M
D
N
L
Suggested Pad Layout
C
Dimensions
Z
G1
G2
X
X1
Y
C
X1
X
G2
Value (in mm)
1.1
0.3
0.2
0.7
0.25
0.4
0.7
G1
Y
Z
IMPORTANT NOTICE
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product
described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall
assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website,
harmless against all damages.
LIFE SUPPORT
Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written
approval of the President of Diodes Incorporated.
DS30843 Rev. 7 - 2
3 of 3
www.diodes.com
DDTC113TLP
© Diodes Incorporated
Similar pages