90MHz SAW Filter 12MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBN09026 www.sipatsaw.com Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package No matching required for operation at 50Ω RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Unit Minimum Typical Maximum Center Frequency MHz 89.9 90 90.1 Insertion Loss dB - 25.2 27 3dB Bandwidth MHz 12.1 12.18 - Passband Variation dB - 0.6 1.5 Absolute Delay usec - 3.72 4 f0±6.475MHz dB 35 46 - f0±6.675MHz dB 45 59 - f0±7.075MHz dB 50 57 - f0±11.075MHz dB 55 61 - Ultimate Rejection Material Temperature coefficient KHz/°C -8.46 Substrate Material - YZ LN Ambient Temperature °C 25 Operating Temperature Range °C -40 - +85 Storage Temperature Range °C -45 - +105 DC Voltage V Input Power dBm ESD Class - 0 - - 10 1 DIP3512 (35.0x12.8x4.7mm3) Package Size Notes: 1. All specifications are based on the test circuit shown; 2. In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number LBN09026 Rev. Date 2008-12-01 Ver. 1.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 1/3 90MHz SAW Filter 12MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBN09026 www.sipatsaw.com Matching Configuration Source/Load Impedance=50 ohm OUTPUT 50Ω INPUT 50Ω Notes - Component values may change depending on board layout. Package Dimension 35.00 0.5 Pad Configuration: 12.80 0.5 SIPAT LBN09026 XXYYZZ 1 Output 5 Ground All Others 4.7 Marking Configuration: 4.5 1) SIPAT: Manufacturer Name 2) LBN09026: Part Number 0.45 0.05 3) XXYY: Date(Year/month) 4) ZZ: Identified Code 2.54 0.2 5 6 1 Package: DIP3512 7.62 0.2 4 3 2 25.40 0.2 2.54 0.2 Unit: mm SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Input Part Number LBN09026 Rev. Date 2008-12-01 Ver. 1.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 2/3 90MHz SAW Filter 12MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBN09026 www.sipatsaw.com Typical Performance Frequency Respond Passband Respond Type Performance Type Performance -15.1643 -23.6643 -25.1643 -24.1643 -35.1643 -24.6643 -25.1643 Amplitude ripple(dB) -55.1643 -65.1643 -75.1643 -25.6643 -26.1643 -85.1643 -26.6643 -95.1643 -27.1643 -105.1643 -115.1643 65 70 75 80 85 90 95 Frequency(MHz) Horizontal: 5MHz/Div 100 105 110 -27.6643 75 115 Vertical: 10dB/Div 80 85 90 Frequency(MHz) 95 Horizontal: 5MHz/Div Group Delay Variation(f0±6MHz) 100 105 Vertical: 0.5dB/Div Phase Linearity(f0±6MHz) Type Performance Type Performance 4200 80 4100 60 4000 40 3900 20 X: 96 Y: 6.91 X: 84 Y: 2.067 X: 90 Y: 3725 X: 84 Y: 3701 Degree(deg) 3800 X: 96 Y: 3690 3700 X: 90 Y: -1.655 0 -20 3600 3500 -40 3400 -60 3300 -80 86 88 90 Frequency(MHz) 92 Horizontal: 2MHz/Div 94 96 98 100 80 Vertical: 100ns/Div 82 84 86 88 +j2.0 98 100 Vertical: 20deg/Div 0.5 0.2 5.0 2.0 0.0 ∞ ∞ -j5.0 -j0.2 -j2.0 -j0.5 +j5.0 +j0.2 -j5.0 -j0.2 +j2.0 +j0.5 +j5.0 +j0.2 1.0 96 +j1.0 +j0.5 0.5 94 Smith Chart S22 +j1.0 -j2.0 -j0.5 -j1.0 -j1.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 92 Horizontal: 2MHz/Div Smith Chart S11 0.0 90 Frequency(MHz) 5.0 84 2.0 82 1.0 3200 80 0.2 Group Delay Time(ns) Magnitude(dB) -45.1643 Part Number LBN09026 Rev. Date 2008-12-01 Ver. 1.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 3/3