InGaAsP STRAINED MQW DC-PBH PULSED LASER DIODE MODULE FOR 1310 nm OTDR APPLICATION NDL7513P SERIES FEATURES DESCRIPTION • HIGH OUTPUT POWER: Pf = 110 mW at IFP = 400 mA1 The NDL7503P Series is a 1310 nm newly developed Strained Multiple Quantum Well (st-MQW) structure pulsed laser diode coaxial module with single mode fiber. It is designed for a light source of optical measurement equipment (OTDR). • LONG WAVELENGTH: λC = 1310 nm • COAXIAL MODULE WITHOUT THERMOELECTRIC COOLER • SINGLE MODE FIBER PIGTAIL Note: 1. Pulse Conditions: Pulse width (PW) = 10 µs, Duty = 1%. ELECTRO-OPTICAL CHARACTERISTICS (TC = 25°C) PART NUMBER SYMBOLS PARAMETERS AND CONDITIONS NDL7513P Series UNITS MIN TYP MAX 2.5 4.0 20 30 VFP Forward Voltage, IFP = 400 mA, PW = 10 µs, Duty = 1% ITH Threshold Current mA Pf Optical Output Power from Fiber, IFP = 400 mA, PW = 10 µs, Duty = 1% mW 70 110 λC RMS Center Wavelength, IFP = 400 mA, PW = 10 µs, Duty = 1% nm 1290 1310 1330 σ RMS Spectral Width, IFP = 400 mA, PW = 10 µs, Duty = 1% nm 4.5 10.0 tr Rise Time, 10-90% ns 1.0 tf Fall Time, 90-10% ns 1.0 V ELECTRO-OPTICAL CHARACTERISTICS (TC = 0 to +60°C) PART NUMBER SYMBOLS PARAMETERS AND CONDITIONS NDL7513P Series UNITS MIN ITH Threshold Current mA Pf Optical Output Power from Fiber, IFP = 400 mA, PW = 10 µs, Duty = 1% mW 50 λC RMS Center Wavelength, IFP = 400 mA, PW = 10 µs, Duty = 1% nm 1280 ∆λ/∆T Temperature Dependency of Center Wavelength nm/°C σ RMS Spectral Width, IFP = 400 mA, PW = 10 µs, Duty = 1% dB TYP MAX 50 1342.5 0.35 10 California Eastern Laboratories NDL7513P SERIES ABSOLUTE MAXIMUM RATINGS1 ORDERING INFORMATION (TC = 25°C, unless otherwise specified) SYMBOLS PARAMETERS UNITS RATINGS IFP Pulsed Forward Current2 mA 600 VR Reverse Voltage V 2.0 TC Operating Case Temperature °C -20 to +60 TSTG Storage Temperature °C -40 to +85 TSLD Lead Soldering Temperature (10 sec) °C 260 PART NUMBER NDL7513P NDL7513PC NDL7513PD NDL7513P1 NDL7513P1C NDL7513P1D DESCRIPTION Without Connector With FC-PC Connector With SC-PC Connector Without Connector With FC-PC Connector With SC-PC Connector FLANGE TYPE No Flange Flat Mount Flange Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. Pulse Condition: Pulse Width (PW) = 10 µs, Duty = 1 %. TYPICAL PERFORMANCE CURVES (TC = 25°C, unless otherwise specified) LONGITUDINAL MODE (FROM FIBER) 120 PW = 10 µs Duty = 1% Relative Intensity, (Linear Scale) Optical Output Power from Fiber, Pf (mW) OPTICAL OUTPUT POWER FROM FIBER vs. LD PULSE FORWARD CURRENT 100 80 25°C 60 60°C 40 20 0 0 100 200 300 Pulsed Forward Current, IFP (mA) 400 1310 nm Wavelength, λ (nm) 5 nm/div NDL7513P SERIES OUTLINE DIMENSIONS (Units in mm) NDL7513P Optical Fiber SM-9/125 Length: 1 m NDL7513P1 Optical Fiber SM-9/125 Length: 1 m φ0.9 φ0.9 φ7 φ7 27.4 27.4 2−φ2.2 4 2 φ0.45 20 φ0.45 20 φ6 φ6 12.7 17.0 12 φ7 P.C.D. = φ2 4 3 1 3.7 43 2 LD 12 1 P.C.D. = φ2 CASE EXCLUSIVE NORTH AMERICAN AGENT FOR 7.2 PIN CONNECTIONS PIN CONNECTIONS 1 2 LD CASE RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM DATA SUBJECT TO CHANGE WITHOUT NOTICE 05/09/2000