DC / DC Converter Series CT-13DS4 SERIES 1000Vdc Isolation Single & Dual Output 1watt Dc-Dc Converter FEATURES: ●Small Footprint ●22PIN SMD Package ●High Efficiency up to 80% ●Unregulated Output Types ●High Power Density ●No External Component Required ●Operating Temperature:-40℃ TO +85℃ ●Industry Standard Pinout Specifications typical at TA=25°C, nominal input voltage and rated output current unless otherwise specified Output Output Package Efficiency Style Part Number Voltage Current Vdc mA % TYP CT-XXS03NNL CT -XXS05NNL CT-XXS09NNL CT-XXS12N2NL CT-XXS15N2NL CT -XXD03NNL CT-XXD05NNL CT-XXD09NNL CT-XXD12N2NL CT-XXD15N2NL 3.3 5 9 12 15 ±3.3 ±5 ±9 ±12 ±15 303 200 112 84 67 ±150 ±100 ±56 ±42 ±34 65 70 75 78 80 65 70 75 78 80 Note:1.”XX” Is Input Voltage:03=3.3Vdc,05=5Vdc, 09=9Vdc,12=12Vdc, 15=15Vdc. 3.The input voltage increases, there will be an increase in efficiency. Input Specifications Parameters Conditions Voltage Tolerance Filter Min Vo, Io Nom Capacitor Output Specifications Parameters Conditions 100% full load Voltage Tolerance Short Circuit Protection 1 1 1 2 2 1 1 1 2 2 2. Over 12Vdc,15Vdc input voltage, using the 2nd package. Typ Max ±10 Min Typ Short Term Units % Max Units ±5 % 1 Sec Line Regulation For 1.0% OF Vin 1.2 Load Regulation 3.3V (10% To 100% F.L) 15 Load Regulation 5V,9V (10% To 100% F.L) 12&8.0 Load Regulation 12V,15V (10% To 100% F.L.) 8.5&7.0 % BW=DC To 20MHz 75 mVp-p Ripple & Noise Transient response setting time 50% load step change % % 350 % us General Specifications Parameters Isolation Resistance Switching Frequency Conditions Min 500Vdc Full load,nominal input 1000 Non Condensing Free air Convection DAP MIL-HDBK-217F@25℃ Package1 or Package2 Package 1 Package 2 Max Units 85 95 MΩ KHz ℃ % 100 -40 Operating Temperature Humidity Cooling Case material MTBF Weight Dimensions Dimensions Typ 3500000 1.8 15.24x8.0x7.30 15.24x8.0x8.50 Hours g mm mm  CET Technology, LLC • www.cettechnology.com, E: [email protected] • T: 603.894.6100 • F: 603.894.6161 DC / DC Converter Series CT-13DS4 SERIES 1000Vdc Isolation Single & Dual Output 1watt Dc-Dc Converter Tolerance Envelope Graph 100 120% 80% +Vout Cin GND 3.3V:Cin 5V :Cin 9V :Cin 12V:Cin 15V:Cin 4.7uF,25V 4.7uF,25V 4.7uF,25V 2.2uF,25V 1uF,5 0V GND 120% 13DS4 - 05 S 12 N 2 NL A B C D E F G A:Series B:Input Voltage C:Single(S)Dual(D) D:Output Voltage E:Unregulated(N) F:Packge G:RoHS Version +Vout Cin 3.3V :Cout 22uF,16V 5V :Cout 10uF,25V 9V :Cout 4.7uF,25V 12V:Cout 2.2uF,25V 15V:Cout 1uF,50V Part Number Vin Single Cout -Vout 110% Output Current(%) Recommended Test Circuit Vin 90% 100 100% 85 Ambient Temperature(℃) 70% -40 10% 0 80% 70% 60% Nature Convection 90% 40% 25 100% 50% 50 20% 75 110% 30% Output Voltage(%) OutPut Power(%) Temperature Derating Graph 3.3V:Cin 5V :Cin 9V :Cin 12V :Cin 15V:Cin Cout Dual 4.7uF,25V 4.7uF,25V 4.7uF,25V 2.2uF,25V 1uF,50V Com Cout 3.3V :Cout 22uF,16V 5V :Cout 10uF,25V 9V :Cout 4.7uF,25V 12V:Cout 2.2uF,25V 15V:Cout 1uF,50V -Vout Markings and Dimensions 12.70 12 2.54±0.10 1 22 12 1.00 11 2.54±0.10 1 1.00 2.00 11.75 2.00 0.50±0.05 12.70 15.24 8.00 8.00 7.75 22 2 7.75 15.24 11.75 1 11 0.50±0.05 2.54 SUGGESTED PAD LAYOUT 2.54 7.30 8.50 SUGGESTED PAD LAYOUT 12.70 11.00 7.00 12.70 8.20 11.00 Unit：mm Unless otherwise specified, all tolerances are ±0.25 PIN Connection PIN Single Dual 1 -Vin -Vin 3 +Vin +Vin 5 NC NC 9 -Vout Com 11 NC -Vout 12 NC NC 14 +Vout +Vout 18 NC NC 20 NC NC 22 NC NC  CET Technology, LLC • www.cettechnology.com, E: [email protected] • T: 603.894.6100 • F: 603.894.6161