3008 POWER INDUCTORS High Reliability Power Inductors ML369PJB ■ High temperature materials allow operation in ambient temperatures up to 155°C ■ Special construction allows it to pass vibration testing to 80 G and shock testing to 1000 G. Core material Ferrite Terminations Silver-palladium-platinum-glass frit. Weight 22 – 25 mg Ambient temperature –55°C to +105°C with Irms current, +105°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 1000/7″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.37 mm pocket depth Recommended pick and place nozzle OD: 3 mm; ID: ≤1.5 mm Part number1 ML369PJB561MLZ ML369PJB801MLZ ML369PJB102MLZ ML369PJB152MLZ ML369PJB222MLZ ML369PJB332MLZ ML369PJB472MLZ ML369PJB562MLZ ML369PJB682MLZ ML369PJB822MLZ ML369PJB103MLZ ML369PJB123MLZ ML369PJB183MLZ ML369PJB223MLZ ML369PJB333MLZ ML369PJB473MLZ ML369PJB683MLZ ML369PJB104MLZ ML369PJB124MLZ ML369PJB154MLZ ML369PJB184MLZ ML369PJB224MLZ ML369PJB334MLZ Inductance2 ±20% (µH) 0.56 0.80 1.0 1.5 2.2 3.3 4.7 5.6 6.8 8.2 10 12 18 22 33 47 68 100 120 150 180 220 330 DCR max3 (Ohms) 0.072 0.092 0.125 0.134 0.175 0.285 0.350 0.450 0.500 0.600 0.650 0.790 1.25 1.50 2.30 3.00 4.75 6.85 7.00 8.00 9.00 11.50 18.00 Isat (A)5 SRF (MHz)4 min typ 10% drop 20% drop 231 330 1.8 2.0 178 255 1.6 1.7 154 220 1.3 1.4 119 170 1.1 1.3 105 150 1.0 1.1 79.8 114 0.81 0.86 60.9 87 0.68 0.73 54.6 78 0.62 0.67 52.5 75 0.58 0.61 42.7 61 0.52 0.56 39.2 56 0.46 0.51 34.3 49 0.45 0.48 26.6 38 0.35 0.38 24.5 35 0.29 0.33 16.1 23 0.27 0.30 14.7 21 0.22 0.23 12.6 18 0.18 0.19 9.8 14 0.15 0.16 9.1 13 0.084 0.094 7.7 11 0.080 0.088 7.0 10 0.070 0.078 6.3 9 0.067 0.073 4.9 7 0.059 0.064 1. When ordering, please specify testing code: ML369PJB104MLZ Testing: Z = COTS H = Screening per Coilcraft CP-SA-10001 N = Screening per Coilcraft CP-SA-10004 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A or equivalent. ® © Coilcraft, Inc. 2011 Irms (A)6 20°C rise 40°C rise 1.1 1.6 0.88 1.3 0.72 1.0 0.70 0.96 0.68 0.88 0.59 0.76 0.54 0.64 0.46 0.58 0.40 0.54 0.36 0.48 0.34 0.45 0.30 0.40 0.26 0.35 0.23 0.30 0.20 0.26 0.17 0.22 0.14 0.18 0.13 0.17 0.11 0.15 0.10 0.14 0.10 0.13 0.080 0.12 0.070 0.10 3. DCR measured on a micro-ohmmeter. 4. SRF measured using an Agilent/HP 8753ES or equivalent. 5. Typical DC current at which the inductance drops the specified amount from its value without current. 6. Typical current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Specifications subject to change without notice. Please check our website for latest information. 1102 Silver Lake Road Cary IL 60013 30% drop 2.1 1.8 1.5 1.3 1.1 0.88 0.74 0.70 0.63 0.58 0.52 0.50 0.40 0.34 0.31 0.24 0.20 0.16 0.10 0.092 0.082 0.076 0.066 Document ML438-1 Phone 800-981-0363 Fax 847-639-1508 Revised 08/11/11 E-mail [email protected] Web www.coilcraft-cps.com 3008 POWER INDUCTORS ML369PJB Series (3008) Typical L vs Current Typical L vs Frequency 1000 1000 330 µH 100 100 µH Inductance (µH) Inductance (µH) 330 µH 33 µH 10 10 µH 3.3 µH 1 0.1 1 0.1 33 µH 10 µH 10 3.3 µH 1.0 µH 1 1.0 µH 0.01 100 µH 100 10 0.1 0.01 0.1 Current (A) 1 10 Frequency (MHz) Current Derating 120 100 90 80 70 60 50 40 25°C Percent of rated Current 110 30 20 Isat Irms 10 0 -55 -40 -20 0 20 40 60 80 100 120 140 160 Ambient temperature (°C) Dimensions are in ® Specifications subject to change without notice. Please check our website for latest information. 1102 Silver Lake Road Cary IL 60013 © Coilcraft, Inc. 2011 inches mm Document ML438-2 Phone 800-981-0363 Fax 847-639-1508 Revised 08/11/11 E-mail [email protected] Web www.coilcraft-cps.com