TO-5 Ceramic Photocell NSL-4512 Advanced Photonix, Inc. 1.64 - 2.27 31.7 Min 6.35 5.00 - 5.16 7.26 Shoulder 1.14 dia x 0.65 max high Dimensions in mm. Tolerance: +/-0.25 except as indicated FEATURES Lead: 0.39 - 0.64 DESCRIPTION Passive resistance output Ceramic package APPLICATIONS The NSL-4512 is a CdS photoconductive cell on a TO-5 ceramic substrate. The photocell is encapsulated with epoxy for moisture resistance. Industrial . ABSOLUTE MAXIMUM RATING (TA)= 23°C UNLESS OTHERWISE NOTED SYMBOL VP Pd TOp TStg TS PARAMETER MIN Voltage (peak AC or DC) Power Dissipation @ 25˚C (1) Operating Temperature Storage Temperature Soldering Temperature (2) -60 -60 MAX 120 125 +75 +75 +260 UNITS V mW °C °C °C Note: (1) Derate linearly to 0 at 75C (2) >0.08” from case for <5 sec. (3) Cells light adapted at 30 to 50 Ftc for 16 hrs minimum prior to electrical tests. RELIABILITY Contact API for recommendations on specific test conditions and procedures. ELECTRO-OPTICAL CHARACTERISTICS SYMBOL CHARACTERISTIC RL Light Resistance RD P Dark Resistance Spectral Peak TEST CONDITIONS 1 ftc., 2854˚K (3) 100 ftc., 2854˚K (3) 5 sec after removal of test light. (TA)= 23°C, UNLESS OTHERWISE NOTED MIN TYP MAX UNITS 25.8 43 1.0 2.5 550 60.2 KΩ KΩ MΩ nm Information in this technical datasheet is believed to be correct and reliable. However, no responsibility is assumed for possible inaccuracies or omission. Specifications are subject to change without notice. © 2014 Advanced Photonix, Inc. All rights reserved. Advanced Photonix Inc. 1240 Avenida Acaso, Camarillo CA 93012 • Phone (805) 987-0146 • Fax (805) 484-9935 • www.advancedphotonix.com REV 02/04-15