Part Number: www.SunLED.com GURUYX10D 10 SEGMENTS BAR GRAPH ARRAY Features z SUITABLE FOR LEVEL INDICATORS. z LOW CURRENT OPERATION. z EXCELLENT ON/OFF CONTRAST. z WIDE VIEWING ANGLE. z END STACKABLE. z MECHANICALLY RUGGED. z BI-COLOR VERSION AVAILABLE. z DIFFERENT COLORS IN ONE UNIT AVAILABLE. z STANDARD : GRAY FACE, WHITE SEGMENT. z RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. UR (GaAsP/ GaP) Operating Characteristics (TA=25°C) Absolute Maximum Ratings (TA=25°C) UR UY (GaAsP/ (GaAsP GaP) /GaP) Unit Reverse Voltage VR 5 5 V Forward Current IF 30 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 160 140 mA Power Dissipation PT 75 75 mW Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature Lead Solder Temperature [2mm Below Package Base] Part Number GURUYX10D °C 260°C For 3~5 Seconds Emitting Color Emitting Material Forward Voltage (Typ.) (IF=10mA) VF 1.9 1.95 V Forward Voltage (Max.) (IF=10mA) VF 2.5 2.5 V Reverse Current (Max.) (VR=5V) IR 10 10 uA Wavelength Of Peak Emission (Typ.) (IF=10mA) λP 627 590 nm Wavelength Of Dominant Emission (Typ.) (IF=10mA) λD 625 588 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) Δλ 45 35 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 15 20 pF Luminous Intensity (IF=10mA) ucd Wavelength nm λP min. typ. Red GaAsP/GaP 1900 8990 627 Yellow GaAsP/GaP 1900 8990 590 Published Date : MAR 13,2008 Drawing No : SDSA3716 UY (GaAsP/ Unit GaP) V3 Checked : Shin Chi Description 10 Segments Bargraph-Display P.1/5 Part Number: www.SunLED.com GURUYX10D 10 SEGMENTS BAR GRAPH ARRAY UR Published Date : MAR 13,2008 Drawing No : SDSA3716 V3 Checked : Shin Chi P.2/5 Part Number: www.SunLED.com GURUYX10D 10 SEGMENTS BAR GRAPH ARRAY UY Published Date : MAR 13,2008 Drawing No : SDSA3716 V3 Checked : Shin Chi P.3/5 Part Number: www.SunLED.com GURUYX10D 10 SEGMENTS BAR GRAPH ARRAY Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 13,2008 Drawing No : SDSA3716 V3 Checked : Shin Chi P.4/5 Part Number: www.SunLED.com GURUYX10D 10 SEGMENTS BAR GRAPH ARRAY PACKING & LABEL SPECIFICATIONS Published Date : MAR 13,2008 Drawing No : SDSA3716 GURUYX10D V3 Checked : Shin Chi P.5/5