Coilcraft MSS1246T-103ML Smt power inductor Datasheet

Document 540-1
RE
U
T
A
R
E
P
M
E
T
HIGH
SMT Power Inductors – MSS1246T
• Designed for high ambient temperatures
• Magnetic shielding allows high density mounting.
Designer’s Kit C417 contains 3 each of all values.
Core material Ferrite
Terminations RoHS compliant matte tin over nickel over phos
bronze. Other terminations available at additional cost.
Weight: 2.3 g – 2.5 g
Ambient temperature –40°C to +125°C with Irms current, +125°C
to +165°C with derated current
Storage temperature Component: –40°C to +165°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 200/7″ reel; 800/13″ reel; Plastic tape: 24 mm wide,
0.35 mm thick, 16 mm pocket spacing, 4.7 mm pocket depth
PCB washing Only pure water or alcohol recommended
Inductance2
Part number1
(µH)
MSS1246T-102ML_
1.0 ±20%
MSS1246T-152ML_
1.5 ±20%
MSS1246T-272ML_
2.7 ±20%
MSS1246T-332ML_
3.3 ±20%
MSS1246T-472ML_
4.7 ±20%
MSS1246T-562ML_
5.6 ±20%
MSS1246T-682ML_
6.8 ±20%
MSS1246T-822ML_
8.2 ±20%
MSS1246T-103ML_ 10 ±20%
MSS1246T-123ML_ 12 ±20%
MSS1246T-153ML_ 15 ±20%
MSS1246T-183ML_ 18 ±20%
MSS1246T-223ML_ 22 ±20%
MSS1246T-273ML_ 27 ±20%
MSS1246T-333ML_ 33 ±20%
MSS1246T-393ML_ 39 ±20%
MSS1246T-473ML_ 47 ±20%
MSS1246T-563ML_ 56 ±20%
MSS1246T-683ML_ 68 ±20%
MSS1246T-823ML_ 82 ±20%
MSS1246T-104ML_ 100 ±20%
MSS1246T-124KL_ 120 ±10%
MSS1246T-154KL_ 150 ±10%
MSS1246T-184KL_ 180 ±10%
MSS1246T-224KL_ 220 ±10%
MSS1246T-274KL_ 270 ±10%
MSS1246T-334KL_ 330 ±10%
MSS1246T-394KL_ 390 ±10%
MSS1246T-474KL_ 470 ±10%
MSS1246T-564KL_ 560 ±10%
MSS1246T-684KL_ 680 ±10%
MSS1246T-824KL_ 820 ±10%
MSS1246T-105KL_ 1000 ±10%
DCR3
SRF
(mOhms)
typ4
typ
max
(MHz)
5.6
6.3 100
8.7
9.7
85.0
10.3
11.5
70.0
15.1
16.8
65.0
19.1
21.3
42.0
22.1
24.6
37.0
24.9
27.7
33.0
27.4
30.5
31.0
36.8
40.9
27.0
38.9
43.3
24.0
48.6
54.1
22.0
51.0
56.7
19.0
60.3
67.0
18.0
67.5
75.0
16.0
81.7
90.8
15.0
95.2 105.8
13.3
120.6 134.0
12.0
133.8 148.7
10.6
167.3 185.9
9.7
188.5 209.5
8.8
216.8 240.9
8.0
287.2 319.2
7.2
326.7 363.0
6.6
379.5 421.7
5.9
488.2 542.5
5.3
560.1 622.4
4.7
731.4 812.7
4.1
813.7 904.2
3.8
935.1 1039
3.5
1193 1326
3.0
1370 1523
2.8
1590 1767
2.6
2090 2323
2.4
Isat (A)5
10% 20% 30%
drop drop drop
18.14 20.64 22.24
14.06 15.90 17.08
11.66 13.16 14.16
9.74 11.08 11.98
8.62 9.70 10.42
7.62 8.74 9.44
7.38 8.36 9.00
6.84 7.70 8.32
5.88 6.66 7.18
5.34 6.04 6.52
4.68 5.36 5.78
4.32 4.92 5.32
3.84 4.34 4.75
3.54 4.02 4.32
3.24 3.66 3.96
3.04 3.46 3.72
2.70 3.08 3.34
2.46 2.80 3.02
2.26 2.54 2.74
1.98 2.26 2.46
1.84 2.08 2.24
1.62 1.86 2.04
1.48 1.70 1.82
1.36 1.56 1.68
1.22 1.38 1.50
1.12 1.26 1.36
1.00 1.10 1.20
0.946 1.00 1.10
0.864 0.978 1.00
0.776 0.884 0.956
0.720 0.818 0.882
0.634 0.728 0.792
0.594 0.676 0.728
Irms (A)6
20°C 40°C
rise rise
6.00 8.00
5.80 7.80
5.00 6.80
4.50 6.30
4.40 6.00
3.95 5.75
3.70 5.20
3.35 4.67
2.85 3.90
2.69 3.65
2.50 3.40
2.41 3.19
2.30 3.14
2.06 2.86
1.90 2.60
1.73 2.39
1.50 2.10
1.44 2.01
1.30 1.80
1.24 1.72
1.19 1.65
1.03 1.42
0.95 1.30
0.89 1.21
0.76 1.00
0.72 0.95
0.65 0.87
0.59 0.79
0.56 0.76
0.50 0.67
0.46 0.62
0.43 0.58
0.36 0.50
1. Please specify termination and packaging codes:
MSS1246T-105KLD
Termination: L =RoHS compliant matte tin over
nickel over phos bronze.
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C=7″ machine-ready reel. EIA-481
embossed plastic tape (200 parts
per full reel).
B=Less than full reel. In tape, but
not machine ready.
To have a leader and trailer
added ($25 charge), use code
letter C instead.
D=13″ machine-ready reel. EIA-481
embossed plastic tape (800 parts
per full reel).
2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc
using a Coilcraft SMD-A fixture in an Agilent/
HP 4263B LCR meter or equivalent.
3. DCR measured on a micro-ohmmeter and a
Coilcraft CCF858 test fixture.
4. SRF measured using an Agilent/HP 8753D
network analyzer and a Coilcraft SMD-D test
fixture.
5. DC current at which the inductance drops the
specified amount from its value without current.
6. Current that causes the specified temperature rise
from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount
Components” before soldering.
Specifications subject to change without notice.
Please check our website for latest information.
© Coilcraft, Inc. 2009
Document 540-1 Revised 10/15/08
Document 540-2
URE
T
A
R
E
P
M
E
T
HIGH
SMT Power Inductors – MSS1246T
Typical L vs Frequency
Typical L vs Current
10000
10000
1000 µH
1000 µH
1000
Inductance (µH)
Inductance (µH)
1000
100 µH
100
10 µH
10
100 µH
100
10 µH
10
1 µH
1
1 µH
1
0.1
0.01
1
0.1
10
0.1
0.1
10
1
Frequency (MHz)
100
Current (A)
0.472 ±0.012
12,0 ±0,30
Current Derating
120
123
X
0.472 ±0.012
12,0 ±0,30
100
90
Dash number
Internal code
80
70
60
0.181 ±0.008
4,6 ±0,20
50
40
25°C
Percent of rated Current
110
30
20
Isat
Irms
10
0
-40 -20
0
20
40
60
80
100
120
Ambient temperature (°C)
140
0.157
4,0
0.138 ±0.016
3,5 ±0,40
160 180
0.197 ±0.016
5,0 ±0,40
Dimensions are in
0.335
8,5
inches
mm
Specifications subject to change without notice.
Please check our website for latest information.
© Coilcraft, Inc. 2009
0.217
5,5
0.197 ±0.008
5,0 ±0,20
Recommended
Land Pattern
Document 540-2 Revised 10/15/08
Similar pages