MAPDCC0002
Low Cost Two-Way SMT Power
Divider, 1850 - 1990 MHz
Features
Rev. V3
Functional Block Diagram
Small Size and Low Profile
Industry Standard SOIC-8 SMT Plastic Package
Excellent Amplitude and Phase Balance
Superior Repeatability
Typical Insertion Loss 0.7 dB
Typical Isolation 21 dB
1 Watt Power Handling
Lead-Free SOIC-8 Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
RoHS* Compliant Version of DS52-0002
Description
M/A-COM’s MAPDCC0002 is an IC-based
monolithic power divider in a low cost SOIC-8 plastic
package. This 2-way power divider is ideally suited
for applications where small size, low insertion loss,
superior phase/amplitude tracking and low cost are
required. Typical applications include base station
switching networks and other communication applications where size and PCB real estate are a premium. Available in tape and reel.
The MAPDCC0002 is fabricated using a passiveintegrated circuit process. The process features fullchip passivation for increased performance and
reliability.
Pin Configuration
Ordering Information
Part Number
Package
MAPDCC0002
Bulk Packaging
MAPDCC0002TR
1000 piece reel
MAPDCC0002-TB
Sample Test Board
Note: Reference Application Note M513 for reel size
information.
1
Pin No.
Function
1
GND
2
RF-IN
3
GND
4
GND
5
RF-1 (out)
6
GND
7
GND
8
RF-2 (out)
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAPDCC0002
Low Cost Two-Way SMT Power
Divider, 1850 - 1990 MHz
Rev. V3
Electrical Specifications1: TA = 25°C
1.
Parameter
Test Conditions
Frequency
Units
Min
Typ
Max
Insertion Loss
Above 3.0 dB
1850 - 1990
dB
—
0.5
0.6
Isolation
—
1850 - 1990
dB
15
21
—
VSWR
Input RL
1850 - 1990
Ratio
—
1.2:1
1.4:1
VSWR
Output RL
1850 - 1990
Ratio
—
1.4:1
1.6:1
Amplitude Balance
—
1850 - 1990
dB
—
0.05
0.15
Phase Balance
—
1850 - 1990
Deg.
—
1.0
3.0
All specifications apply with a 50-ohm source and load impedance.
Absolute Maximum Ratings 2,3
Parameter
Input Power
2.
3.
4.
Absolute Maximum
4
1W CW
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to +150°C
Recommended PCB Configuration
Exceeding any one or combination of these limits may cause
permanent damage to this device.
M/A-COM does not recommend sustained operation near
these survivability limits.
With internal load dissipation of 0.125W maximum
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
GMIC Circuits are sensitive to electrostatic
discharge (ESD) and can be damaged by static
electricity. Proper ESD control techniques should
be used when handling these devices.
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAPDCC0002
Low Cost Two-Way SMT Power
Divider, 1850 - 1990 MHz
Rev. V3
Typical Performance Curves
Insertion Loss vs. Frequency
(above theoretical split loss)
Isolation vs. Frequency
40
0.8
Isolation (dB)
Insertion Loss (dB)
1.0
0.6
0.4
0.2
0.0
1850
1870
1890
1910
1930
1950
1970
30
20
10
0
1850
1990
1870
Frequency (MHz)
1930
1950
1970
1990
1970
1990
Output VSWR vs. Frequency
1.5
1.5
1.4
1.4
1.3
VSWR
VSWR
1910
Frequency (MHz)
Input VSWR vs. Frequency
1.2
1.1
1.0
1850
1890
1.3
1.2
1.1
1870
1890
1910
1930
1950
Frequency (MHz)
1970
1990
1.0
1850
1870
1890
1910
1930
1950
Frequency (MHz)
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAPDCC0002
Low Cost Two-Way SMT Power
Divider, 1850 - 1990 MHz
Rev. V3
Lead-Free, SOIC-8†
†
Reference Application Note M538 for lead-free solder reflow
recommendations.
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAPDCC0002
Low Cost Two-Way SMT Power
Divider, 1850 - 1990 MHz
Rev. V3
M/A-COM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
5
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support