MX23L1610 3.3 Volt 16-Mbit (2M x 8 / 1M x 16) Mask ROM PIN CONFIGURATION NC A18 A17 A7 A6 A5 A4 A3 A2 A1 A0 CE VSS OE D0 D8 D1 D9 D2 D10 D3 D11 CE OE Byte VCC VSS NC 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 42 PDIP NC A19 A8 A9 A10 A11 A12 A13 A14 A15 A16 BYTE VSS D15/A-1 D7 D14 D6 D13 D5 D12 D4 VCC A18 A17 A7 A6 A5 A4 A3 A2 A1 A0 CE VSS OE D0 D8 D1 D9 D2 D10 D3 D11 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 A19 A8 A9 A10 A11 A12 A13 A14 A15 A16 BYTE VSS D15/A-1 D7 D14 D6 D13 D5 D12 D4 VCC 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 48 TSOP (Normal Type) BYTE A16 A15 A14 A13 A12 A11 A10 A9 A8 A19 VSS NC A18 A17 A7 A6 A5 A4 A3 A2 A1 A0 CE PIN DESCRIPTION Symbol A0~A19 D0~D14 D15/A-1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 MX23L1610 44 SOP/44 TSOP • Bit organization - 2M x 8 (byte mode) - 1M x 16 (word mode) • Fast access time - 70ns (max.)@3.3V±10% • Current - Operating:25mA - Standby:15uA • Supply voltage - 3.0V ~ 3.6V • Package - 44 pin SOP (500mil) - 42 pin DIP (600mil) - 48 pin TSOP (12mm x 20mm) - 44 pin TSOP (Type II) MX23L1610 FEATURES Pin Function Address Inputs Data Outputs D15 (Word Mode)/ LSB Address (Byte Mode) Chip Enable Input Output Enable Input Word/ Byte Mode Selection Power Supply Pin Ground Pin No Connection 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 MX23L1610 (Normal Type) 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 VSS VSS D15/A-1 D7 D14 D6 D13 D5 D12 D4 VCC VCC NC D11 D3 D10 D2 D9 D1 D8 D0 OE VSS VSS 48 TSOP (Reverse Type) VSS VSS D15/A-1 D7 D14 D6 D13 D5 D12 D4 VCC VCC NC D11 D3 D10 D2 D9 D1 D8 D0 OE VSS VSS P/N:PM0243 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 MX23L1610 (Reverse Type) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 BYTE A16 A15 A14 A13 A12 A11 A10 A9 A8 A19 A21 A20 A18 A17 A7 A6 A5 A4 A3 A2 A1 A0 CE REV. 3.0, JUL. 08, 2005 1 MX23L1610 ORDER INFORMATION Part No. MX23L1610MC-70 MX23L1610MC-90 MX23L1610MC-10 MX23L1610MC-12 MX23L1610MC-15 Access 70ns 90ns 100ns 120ns 150ns Package 44 pin SOP 44 pin SOP 44 pin SOP 44 pin SOP 44 pin SOP Remark MX23L1610PC-10 MX23L1610PC-12 MX23L1610PC-15 MX23L1610TC-70 100ns 120ns 150ns 70ns 42 pin PDIP 42 pin PDIP 42 pin PDIP 48 pin TSOP MX23L1610TC-90 MX23L1610TC-10 MX23L1610TC-12 MX23L1610TC-15 MX23L1610RC-10 MX23L1610RC-90 MX23L1610RC-12 MX23L1610RC-15 MX23L1610TI-12* MX23L1610YC-10 MX23L1610YC-12 MX23L1610YC-15 MX23L1610MI-12G* MX23L1610MC-10G MX23L1610MC-12G MX23L1610PC-10G MX23L1610PC-12G MX23L1610TC-10G MX23L1610TC-12G MX23L1610TC-15G 90ns 100ns 120ns 150ns 100ns 90ns 120ns 150ns 120ns 100ns 120ns 150ns 120ns 100ns 120ns 100ns 120ns 100ns 120ns 150ns 48 pin TSOP 48 pin TSOP 48 pin TSOP 48 pin TSOP 48 pin TSOP(Reverse type) 48 pin TSOP(Reverse type) 48 pin TSOP(Reverse type) 48 pin TSOP(Reverse type) 48 pin TSOP 44 pin TSOP 44 pin TSOP 44 pin TSOP 44 pin SOP 44 pin SOP 44 pin SOP 42 pin PDIP 42 pin PDIP 48 pin TSOP 48 pin TSOP 48 pin TSOP Pb-free Pb-free Pb-free Pb-free Pb-free Pb-free Pb-free Pb-free *Note:Temperature: -40~85° C MODE SELECTION CE H L L L OE X H L L Byte X X H L D15/A-1 X X Output Input D0~D7 High Z High Z D0~D7 D0~D7 P/N:PM0243 D8~D15 High Z High Z D8~D15 High Z Mode Word Byte Power Stand-by Active Active Active REV. 3.0, JUL. 08, 2005 2 MX23L1610 BLOCK DIAGRAM A0/(A-1) A19 Address Buffer Memory Array Page Decoder Page Buffer Word/ Byte Output Buffer D0 D15/(D7) CE BYTE OE ABSOLUTE MAXIMUM RATINGS Item Voltage on any Pin Relative to VSS Ambient Operating Temperature Storage Temperature Note: Symbol VIN Topr Tstg Ratings -0.3V to 4.3V 0° C to 70° C -65° C to 125° C Minimum DC voltage on input or I/O pins is -0.5V. During voltage transitions, inputs may undershoot VSS to -1.3V for periods of up to 20ns. Maximum DC voltage on input or I/O pins is VCC+0.5V. During voltage transitions, input may overshoot VCC to VCC+2.0V for periods of up to 20ns. DC CHARACTERISTICS (Ta = 0° C ~ 70° C, VCC = 3.0V~3.6V) Item Output High Voltage Output Low Voltage Input High Voltage Symbol VOH VOL VIH MIN. 2.4V 2.2V MAX. 0.4V VCC+0.3V* Input Low Voltage Input Leakage Current Output Leakage Current Operating Current Standby Current (TTL) Standby Current (cmos) Input Capacitance Output Capacitance VIL ILI ILO ICC1 ISTB1 ISTB2 CIN COUT -0.3V - 0.2 x VCC 5uA 5uA 25mA 0.5mA 15uA 10pF 10pF P/N:PM0243 Conditions IOH = -400uA IOL = 1.6mA MAX. number:VCC+0.3V is under normal operation mode, and VCC+0.7V is under non-operating mode 0V, VCC 0V, VCC tRC = 120ns, all output open CE = VIH CE>VCC-0.2V Ta = 25° C, f = 1MHZ Ta = 25° C, f = 1MHZ REV. 3.0, JUL. 08, 2005 3 MX23L1610 AC CHARACTERISTICS (Ta = 0° C ~ 70° C, VCC = 3.0V~3.6V) Item Symbol 23L1610-70 23L1610-90 23L1610-10 23L1610-12 23L1610-15 MIN. MAX. MIN. MAX. MIN. MIN. MAX. MIN. MAX. MAX. Read Cycle Time tRC 70ns - 90ns - 100ns - 120ns - 150ns - Address Access Time tAA - 70ns - 90ns - - 120ns - 150ns Chip Enable Access Time tACE - 70ns - 90ns - 100ns - 120ns - 150ns Output Enable Time tOE - 35ns - 45ns - 50ns - 60ns - 70ns Output Hold After Address tOH 0ns - 0ns - 0ns - 0ns - 0ns - Output High Z Delay - 20ns - 20ns - 20ns - 20ns - 20ns tHZ 100ns Note:Output high-impedance delay (tHZ) is measured from OE or CE going high, and this parameter guaranteed by design over the full voltage and temperature operating range - not tested. AC Test Conditions Input Pulse Levels Input Rise and Fall Times Input Timing Level Output Timing Level Output Load 0.4V~ 2.4V 10ns 1.4V 1.4V See Figure IOH (load)=-0.4mA DOUT IOL (load)=1.6mA C<100pF Note: No output loading is present in tester load board. Active loading is used and under software programming control. TIMING DIAGRAM Output loading capacitance includes load board's and all stray capacitance. RANDOM READ ADD ADD ADD ADD tRC tACE CE tOE OE tOH tAA VALID DATA VALID tHZ VALID Note:CE, OE are enable P/N:PM0243 REV. 3.0, JUL. 08, 2005 4 MX23L1610 PACKAGE INFORMATION P/N:PM0243 REV. 3.0, JUL. 08, 2005 5 MX23L1610 P/N:PM0243 REV. 3.0, JUL. 08, 2005 6 MX23L1610 P/N:PM0243 REV. 3.0, JUL. 08, 2005 7 MX23L1610 P/N:PM0243 REV. 3.0, JUL. 08, 2005 8 MX23L1610 P/N:PM0243 REV. 3.0, JUL. 08, 2005 9 MX23L1610 REVISION HISTORY REVISION 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 DESCRIPTION 1. Package Type:Add 42-PDIP package type. 2. DC Characteristics:The input low voltage VIL Max. value is changed as 0.2xVCC instead of 0.8V. 3. AC Characteristics:The output high Z delay is changed as 20ns instead of 70ns. 4. Add 105ns speed grade. 5. Add 100ns speed grade @3.3V±5% 6. AC Test Conditions:The output timing level is changed as 1.4V instead of 0.8V and 2.0V. AC CHARACTERISTICS tOH 10ns-->0ns Typing error correction 1.Added 44-pin TSOP (Type II) Package 2.Modify Package Information 1.Add 90ns speed grade 2.Delete 105ns speed grade 1.Added 70ns speed grade Change VOH(MIN.):2.3V-->2.4V; VIH(MIN.):2.1V-->2.2V Modify Package Information Modify 42-PDIP Package Information 1. Add Pb-free in ordering information Correct typo error 1. Added MX23L1610MI-12G in order information P/N:PM0243 PAGE DATE JUN/11/1998 P4 P1 P1,8 P5~7 P1,3 P1,3 P1,3 P3 P5~9 P5 P2 P2 P2 FEB/01/1999 JAN/18/2000 JUL/18/2001 JUL/31/2001 AUG/14/2001 AUG/15/2001 NOV/21/2002 JUN/20/2003 JUN/30/2004 NOV/09/2004 JUL/08/2005 REV. 3.0, JUL. 08, 2005 10 MX23L1610 MACRONIX INTERNATIONAL CO., LTD. Headquarters: TEL:+886-3-578-6688 FAX:+886-3-563-2888 Europe Office : TEL:+32-2-456-8020 FAX:+32-2-456-8021 Hong Kong Office : TEL:+86-755-834-335-79 FAX:+86-755-834-380-78 Japan Office : Kawasaki Office : TEL:+81-44-246-9100 FAX:+81-44-246-9105 Osaka Office : TEL:+81-6-4807-5460 FAX:+81-6-4807-5461 Singapore Office : TEL:+65-6346-5505 FAX:+65-6348-8096 Taipei Office : TEL:+886-2-2509-3300 FAX:+886-2-2509-2200 MACRONIX AMERICA, INC. TEL:+1-408-262-8887 FAX:+1-408-262-8810 http : //www.macronix.com MACRONIX INTERNATIONAL CO., LTD. reserves the right to change product and specifications without notice.