INNOVASIC IA64F3048SEC Security-enhanced microcontroller Datasheet

IA64F3048SEC
Advance Information Sheet
SECURITY-ENHANCED MICROCONTROLLER
FEATURES
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4 Kbytes SRAM
128 Kbytes EEPROM
Additional 32x32 multiply instruction
Hardware random number generator
30MHz Clock Rate
5V and 3.3V versions planned
Sixteen 16-bit general registers
Flexible instruction set built on 62 basic instruction types
8/16/32-bit data transfer, arithmetic, and logic instructions
Signed and unsigned multiply and divide instructions
Extensive bit manipulation instructions
Bus controller with 8-bit access
3-function refresh controller
DMA controller with short or full address mode
16-bit integrated timer unit (ITU) with 5 channels
Programmable timing pattern controller (TPC)
Watchdog timer
Serial communications interface (SCI) with built-in smart card interface
Eight 10-bit A/D converter channels
Two 8-bit D/A converter channels
Clock pulse generator
Interrupt controller with 37 sources
Seventy input/output pins and eight input-only pins
Available in 100 pin QFP package
The IA64F3048SEC is code compatible with the original Hitachi H8/300H family of
microcontrollers, with additional security enhancements designed into the device. innovASIC
produces replacement ICs using its MILESTM, or Managed IC Lifetime Extension System, cloning
technology. This technology produces replacement ICs far more complex than "emulation" while
ensuring they are compatible with the original IC. MILESTM captures the design of a clone so it
can be produced even as silicon technology advances. MILESTM also verifies the clone against the
original IC so that even the "undocumented features" are duplicated.
This Advanced Information Sheet contains preliminary information for this the IA64F3048SEC.
The complete data sheet which documents all necessary engineering information about the
IA64F3048SEC including functional and I/O descriptions, electrical characteristics, and
applicable timing will be available when the device nears completion.
Copyright  2001
www.innovasic.com
Customer Support:
innovASIC
The End of Obsolescence
Page 1 of 2
1-888-824-4184
IA64F3048SEC
Advance Information Sheet
SECURITY-ENHANCED MICROCONTROLLER
DESCRIPTION
The IA64F3048SEC Security-Enhanced Microcontroller is the ideal solution for many embedded
applications, combining the flexibility of the Hitachi H8/300H family of microcontrollers with
the power of additional on-chip features. This combination allows the development of more
complex embedded applications than is possible with the H8 alone. It also eases the
implementation of more robust security features that are required of products today.
The IA64F3048SEC provides an upward compatibility path for Hitachi H8/300H users who
need higher performance and on-chip security features. The IA64F3048SEC is code compatible
with the H8/300H family of microcontrollers and is pin compatible with the 100-pin QFP of the
H8/3048 microcontroller series. Code development for the IA64F3048SEC utilizes standard
H8/300H software development tools, including compilers, assemblers, and linkers.
The IA64F3048SEC offers all of the standard features of the advanced H8/3048 microcontroller
series with a nearly doubled operating frequency of 30 MHz. InnovASIC has also added new
security-related features to make the IA64F3048SEC a compelling choice for embedded
applications that require higher levels of integrity, authenticity and data protection without loss of
performance. These security features include an extremely flexible 128 Kbytes of nonvolatile
memory in two independent partitions. The NV also has read-out protection and locking
mechanisms to protect vital data. Additional security enhancements include a high quality physical
random number generator and a fast 32x32 multiply with 64-bit result executed as an additional
instruction. The IA64F3048SEC also facilitates PKI and other challenge-response protocols.
• Ordering Information
The IA64F3048SEC prototypes will be available in Q1 2002. Additional versions, including a
3.3V version, are scheduled for release in 2002.
For additional information, contact Mike Berg, V.P. Sales and Marketing, at 1-888-824-4184,
extension 128.
Copyright  2001
www.innovasic.com
Customer Support:
innovASIC
The End of Obsolescence
Page 2 of 2
1-888-824-4184
Similar pages