CD2S THRU CD10S SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIERS Voltage Range - 200 to 1000 Volts Current - 1.0 Ampere Features: Bridge Rectifier Datasheet 1A , 200 - 1000V Glass passivated junction Ideal for printed circuit board Thin body, flat lead High temperature soldering guaranteed: 260 ℃ /10seconds/ These are powerful bridge rectifiers with enhanced Glass Passivated Junction P-N chips. They are advanced rectifiers designed, tested and guaranteed to withstand a specified level of energy in the forward mode of 0.375”(9.5mm) operation. All of these rectifiers are designed for applications such as,switching convertors. Leads solderable per MIL-STD-202,Method 208 They have the low negative leakage and low High reliability under 125℃ forward voltage drop, which allows these types working environment, with the to be operated directly from integrated circuits. limit temperature 150℃ CDS ~ D4 D1 + D3 ~ AC1 D2 - + AC2 Outline Drawing : Dimensions in inches(millimeters) Based on MIL-STD-105E LEVEL II , set the acceptable level as below. Item Critical Major Minor 0.10(Electrical) AQL(%) 0.01 0.25(Physical) 1.00 Signification , Storage and Shipment 1. The signification on the bridge rectifier body can be determined by customer. It will be 100% followed up as the instruction from customer. 2. The parts will be packed in the boxes, and the quantity in one box can be offered by customer. The boxes will be delivered by internal express company. 3. Please keep the parts being stored in the environment with humidity lower than 75%. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load, for capacitive load derate current by 20%. SYMBOLS MDD CD2S MDD CD4S Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage VRRM VRMS VDC 200 140 200 400 280 400 Maximum average forward rectified current at TA=75 IF(AV) 1.0 Amps IFSM 35 Amps VF 1.0 Volts 5.0 50 15 30 -55 to +150 -55 to +150 uA uA MDD Catalog Number Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage drop per leg at 0.4A Maximum DC reverse current TA=25 at rated DC blocking voltage TA=75 Typical junction capactiance per leg(Note) Typical thermal resistance per leg Operating temperature range storage temperature range IR CJ R JA TJ TSTG NOTES: Measured at 1.0MHz and applied reverse voltage of 4.0 volts. MDD ELECTRONIC MDD CD6S 600 420 600 MDD CD8S MDD CD10S UNITS 800 560 800 1000 700 1000 VOLTS VOLTS VOLTS pF /W RATINGS AND CHARACTERISTIC CURVES CD2S THRU CD10S Typical Performance Curves Tc = 25℃, unless otherwise specified MDD ELECTRONIC