CD42__90C CD47__90C ® Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 http://www.pwrx.com POW-R-BLOKTM Dual SCR/Diode Isolated Module 90 Amperes / Up to 1800 Volts BB Description: Powerex Dual SCR/Diode Modules are designed for use in applications requiring phase control and isolated packaging. The modules are isolated for easy mounting with other components on a common heatsink. Features: Electrically Isolated Heatsinking Compression Bonded for Increased Power Cycling Capability Low Thermal Impedance for Improved Current Capability RoHS Compliant UL Recognized (E78240) Benefits: Ordering Information: Outline Dimensions Dimension Inches Millimeters A 3.62 92 B 0.83 21 C 3.15 80 D 1.18 30 F 0.83 21 G 0.79 20 H 0.79 20 J 0.57 14.5 K 0.24 6.2 L 0.63 16 M 0.51 13 N 0.33 8.5 P 0.16 4 Q 0.22 5.6 S 0.11 x .02 2.8 x 0.5 U M5 M5 Note: Dimensions are for reference only. Select the complete nine digit module part number from the table below. Example: CD421690C is a 1600Volt, 90 Ampere Dual SCR/Diode Isolated POW-R-BLOKTM Module Type CD42 CD47 Voltage Current Volts Amperes (x100) 08 12 14 16 18 90 Version C No Additional Insulation Components Required Easy Installation No Clamping Components Required Reduce Engineering Time Applications: Bridge Circuits AC & DC Motor Drives Battery Supplies Power Supplies Large IGBT Circuit Front Ends Lighting Control Heat & Temperature Control Welders Revision Date: 03/30/2015 CD42__90C CD47__90C ® Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 http://www.pwrx.com POW-R-BLOKTM Dual SCR/Diode Isolated Module 90 Amperes / Up to 1800 Volts Absolute Maximum Ratings Characteristics Conditions Symbol Units Repetitive Peak Forward and Reverse Blocking Voltage VDRM & VRRM up to 1800 V Non-Repetitive Peak Reverse Blocking Voltage (t < 5 msec) VRSM VRRM + 100 V RMS Forward Current 180° Conduction, TC=85°C IT(RMS) 141 A Average Forward Current 180° Conduction, TC=85°C IT(AV) 90 A Peak One Cycle Surge Current, Non-Repetitive 50 Hz, 60% VRRM reapplied, Tj=125°C ITSM 2000 A I2t for Fusing for One Cycle, 10 milliseconds 50 Hz, 60% VRRM reapplied, Tj=125°C I2t 20,400 A2 sec Maximum Rate-of-Rise of On-State Current, (Repetitive) Operating Temperature Tj=125°C di/dt 100 A/µs TJ -40 to +125 °C Tstg -40 to +125 °C 35 4 53 6 160 in.-Lb. Nm in.-Lb. Nm g 5.64 oz. 2500 V Storage Temperature Max. Mounting Torque, M5 Mounting Screw on Terminals Max. Mounting Torque, Module to Heatsink Module Weight, Typical V Isolation @ 25C 50 – 60 Hz, 1 minute Vrms Information presented is based upon manufacturers testing and projected capabilities. This information is subject to change without notice. The manufacturer makes no claim as to the suitability of use, reliability, capability, or future availability of this product. Revision Date: 03/30/2015 CD42__90C CD47__90C ® Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 http://www.pwrx.com POW-R-BLOKTM Dual SCR/Diode Isolated Module 90 Amperes / Up to 1800 Volts Electrical Characteristics, TJ=25°C unless otherwise specified Characteristics Symbol Test Conditions IDRM Up to VDRM, TJ=125°C Repetitive Peak Reverse Leakage Current IRRM Peak On-State Voltage V TM Threshold Voltage, Low-level Slope Resistance, Low-level Minimum dV/dt Repetitive Peak Forward Leakage Current Min. Max. Units 10 mA Up to VRRM, TJ=125°C 10 mA ITM =270A 1.90 V V(TO)1 rT1 TJ = 125°C, I = 16.7% x IT(AV) to IT(AV) 0.8 3.01 V mΩ dV/dt Tj=125°C, VDM= 0.67 VDRM Gate Trigger Current IGT Tj= 25°C, VD=12V, IA= 1 A 30 100 mA Gate Trigger Voltage VGT Tj= 25°C, VD=12V, IA= 1 A 0.75 2.5 Volts Holding Current IH Tj= 25°C, VD=12V, IA= 1 A 20 100 mA 800 V/µs Thermal Characteristics Characteristics Max. Units Thermal Resistance, Junction to Case DC Operation Symbol RΘJ-C Per Junction, both conducting 0.28 °C/W Thermal Resistance, Case to Sink Lubricated RΘC-S Per Module 0.15 °C/W Revision Date: 03/30/2015 CD42__90C CD47__90C ® POW-R-BLOKTM Dual SCR/Diode Isolated Module 90 Amperes / Up to 1800 Volts Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 http://www.pwrx.com Maximum On-State Forward Voltage Drop Maximum Transient Thermal Impedance (Junction to Case) ( Tj = 125 C ) 0.3 Thermal Impedance - Rjc - °C/W On-State Voltage - Vtm - Volts 5 4 3 2 0.25 0.2 0.15 0.1 1 0.05 0 10 100 1000 0 0.001 10000 0.01 0.1 Instantaneous On-State Current - Itm - Amperes (Sinusoidal Waveform) 100 (Sinusoidal Waveform) 140 130 180° 120° 120 90° Max. Case Temperature - Tcase - °C Maximum Power Dissipation Per SCR - Watts 10 Maximum Allowable Case Temperature Maximum On-State Power Dissipation 60° 100 30° 15° 80 60 40 20 0 120 110 15° 100 30° 60° 90 90° 120° 180° 80 70 0 20 40 60 80 100 0 10 20 30 40 50 60 70 80 Average On-State Current - It(av) - Amperes Average On-State Current - It(av) - Amperes Maximum On-State Power Dissipation Maximum Allowable Case Temperature (Rectangular Waveform) 90 100 (Rectangular Waveform) 200 130 360° 180 Max. Case Temperature - Tcase - °C Maximum Power Dissipation Per SCR - Watts 1 Time - t - Seconds 270° 160 180° 140 120° 90° 120 60° 30° 100 15° 80 60 40 120 110 100 90 80 30° 60° 90° 120° 180° 270° 15° 70 360° (DC) 20 0 60 0 20 40 60 80 100 120 Average On-State Current - It(av) - Amperes 140 160 0 20 40 60 80 100 120 140 Average On-State Current - It(av) - Amperes Revision Date: 03/30/2015 160