H11AA1-M, H11AA2-M, H11AA3-M, H11AA4-M AC Input/Phototransistor Optocouplers Features Description ■ Bi-polar emitter input The H11AAX-M series consists of two gallium-arsenide infrared emitting diodes connected in inverse parallel driving a single silicon phototransistor output. ■ Built-in reverse polarity input protection ■ Underwriters Laboratory (UL) recognized File #E90700, Volume 2 ■ VDE approved File #102497 (ordering option ‘V’) Applications ■ AC line monitor ■ Unknown polarity DC sensor ■ Telephone line interface Package and Schematic ©2006 Fairchild Semiconductor Corporation H11AAX-M Rev. 1.0.0 1 1 6 BASE 2 5 COLL 3 4 EMITTER www.fairchildsemi.com H11AA1-M, H11AA2-M, H11AA3-M, H11AA4-M AC Input/Phototransistor Optocouplers April 2006 Symbol Parameter Device Value Units TOTAL DEVICE TSTG Storage Temperature All -40 to +150 °C TOPR Operating Temperature All -40 to +100 °C TSOL Lead Solder Temperature All 260 for 10 sec °C 250 mW 2.94 mW/°C PD Total Device Power Dissipation All Derate Linearly From 25°C EMITTER IF IF(pk) PD Continuous Forward Current All 60 mA Forward Current – Peak (1µs pulse, 300 pps) All ±1.0 A 120 mW 1.41 mW/°C 50 mA 150 mW 1.76 mW/°C LED Power Dissipation All Derate Linearly From 25°C DETECTOR IC Continuous Collector Current PD Detector Power Dissipation All All Derate linearity from 25°C Electrical Characteristics (TA = 25°C Unless otherwise specified.) Individual Component Characteristics Symbol Parameter Test Conditions Device IF = ±10mA Min. Typ.* Max. Unit All 1.17 1.5 V VF = 0 V, f = 1.0MHz All 80 pF EMITTER VF Input Forward Voltage CJ Capacitance DETECTOR BVCEO Breakdown Voltage Collector to Emitter IC = 1.0mA, IF = 0 All 30 100 V BVCBO Collector to Base IC = 100µA, IF = 0 All 70 120 V BVEBO Emitter to Base IE = 100µA, IF = 0 All 5 10 V BVECO Emitter to Collector IE = 100µA, IF = 0 All 7 10 ICEO Leakage Current Collector to Emitter VCE = 10 V, IF = 0 H11AA1,3,4(-M) 1 50 H11AA2-M 1 200 CCE Capacitance Collector to Emitter VCE = 0, f = 1MHz All 10 pF CCB Collector to Base VCB = 0, f = 1MHz All 80 pF CEB Emitter to Base VEB = 0, f = 1MHz All 15 pF V nA *Typical values at TA = 25°C 2 H11AAX-M Rev. 1.0.0 www.fairchildsemi.com H11AA1-M, H11AA2-M, H11AA3-M, H11AA4-M AC Input/Phototransistor Optocouplers Absolute Maximum Ratings (TA =25°C Unless otherwise specified) Symbol CTRCE Characteristics Current Transfer Ratio, Collector to Emitter Current Transfer Ratio, Symmetry VCE(SAT) Saturation Voltage, Collector to Emitter Test Conditions Device Min. IF = ±10mA, VCE = 10V H11AA4-M 100 H11AA3-M 50 H11AA1-M 20 H11AA2-M 10 IF = ±10mA, VCE = 10V (Figure 11) All .33 IF = ±10mA, ICE = 0.5mA All Typ.* Max. Units % 3.0 .40 V Isolation Characteristics Symbol Characteristic Test Conditions Min. Typ.* Units CI-O Package Capacitance Input/Output VI-O = 0, f = 1MHz VISO Isolation Voltage f = 60 Hz, t = 1 sec. 7500 Vac(pk) VI-O = 500 VDC 1011 Ω RISO Isolation Resistance 0.7 Max. pF *Typical values at TA = 25°C 3 H11AAX-M Rev. 1.0.0 www.fairchildsemi.com H11AA1-M, H11AA2-M, H11AA3-M, H11AA4-M AC Input/Phototransistor Optocouplers Transfer Characteristics (TA = 25°C Unless otherwise specified.) Fig. 2 Normalized CTR vs. Forward Current Fig. 1 Input Voltage vs. Input Current 100 1.4 TA = 25°C TA = 25°C VCE = 5V 80 Normalized to IF = 10mA 60 1.0 40 NORMALIZED CTR I F - INPUT CURRENT (mA) 1.2 20 0 -20 -40 0.8 0.6 0.4 -60 0.2 -80 0.0 -100 -2.0 -1.5 -1.0 -0.5 0.0 0.5 1.0 1.5 0 2.0 5 20 1.0 NORMALIZED CTR ( CTRRBE / CTRRBE(OPEN)) VCE = 5V Normalized to IF = 10mA, TA = 25°C 1.2 IF = 10mA NORMALIZED CTR 15 Fig. 4 CTR vs. RBE (Unsaturated) Fig. 3 Normalized CTR vs. Ambient Temperature 1.4 1.0 IF = 5mA 0.8 IF = 20mA 0.6 0.4 0.2 -60 -40 -20 0 20 40 60 80 V 0.9 CE = 5V TA = 25°C 0.8 0.7 IF = 20mA 0.6 IF = 10mA 0.5 IF = 5mA 0.4 0.3 0.2 0.1 0.0 100 10 100 Fig. 6 Collector-Emitter Saturation Voltage vs Collector Current 0.9 CE = 0.3V TA = 25°C 0.8 0.7 IF = 20mA 0.6 IF = 10mA 0.5 IF = 5mA 0.4 0.3 0.2 0.1 0.0 10 100 RBE- BASE RESISTANCE (k Ω) 1000 VCE (SAT) - COLLECTOR-EMITTER SATURATION VOLTAGE (V) Fig. 5 CTR vs. RBE (Saturated) 1.0 V 4 H11AAX-M Rev. 1.0.0 1000 RBE - BASE RESISTANCE (kΩ) TA - AMBIENT TEMPERATURE (°C) NORMALIZED CTR ( CTRRBE / CTRRBE(OPEN)) 10 IF - FORWARD CURRENT (mA) VF - INPUT VOLTAGE (V) 100 T = 25°C A 10 1 IF = 2.5mA IF = 5mA 0.1 IF = 10mA 0.01 0.001 0.01 0.1 IF = 20mA 1 10 IC - COLLECTOR CURRENT (mA) www.fairchildsemi.com H11AA1-M, H11AA2-M, H11AA3-M, H11AA4-M AC Input/Phototransistor Optocouplers Typical Performance Characteristics Fig. 7 Switching Speed vs. Load Resistor Fig. 8 Normalized ton vs. RBE 1000 7 SWITCHING SPEED - (µs) A 100 Toff Tf 10 Ton Tr 1 VCC = 10V IC = 2mA RL = 100Ω T = 25°C 6 NORMALIZED ton - (ton(RBE) / ton(open)) IF = 10mA VCC = 10V T = 25°C A 5 4 3 2 1 0 0.1 0.1 1 10 10 100 100 10000 100000 Fig. 10 Dark Current vs. Ambient Temperature Fig. 9 Normalized toff vs. RBE 10000 3.0 VCC = 10V IC = 2mA RL = 100Ω T = 25°C 2.5 ICEO - COLLECTOR -EMITTER DARK CURRENT (nA) NORMALIZED toff - (toff(RBE) / toff(open)) 1000 RBE- BASE RESISTANCE (k Ω) R-LOAD RESISTOR (kΩ) A 2.0 1.5 1.0 0.5 1000 100 VCE = 10V VCE = 30V 10 1 0.1 0.0 10 100 1000 10000 0 100000 20 40 60 80 100 TA - AMBIENT TEMPERATURE (°C) RBE- BASE RESISTANCE (kΩ) Fig. 11 Output Symmetry Characteristics 10 NORMALIZED OUTPUT CURRENT 5 1 IF = I - 10mA I IF = I 10mA I .5 NORMALIZED TO: VCE = 10 V IF = 10 mA .1 .05 THE MAXIMUM PEAK OUTPUT CURRENT WILL BE NO MORE THAN THREE TIMES THE MINIMUM PEAK OUTPUT CURRENT AT IF = ±10 mA .01 .005 .01 .05 .1 .5 1 5 10 VCE - COLLECTOR TO EMITTER VOLTAGE (V) 5 H11AAX-M Rev. 1.0.0 www.fairchildsemi.com H11AA1-M, H11AA2-M, H11AA3-M, H11AA4-M AC Input/Phototransistor Optocouplers Typical Performance Characteristics (Continued) Package Dimensions (Through Hole) Package Dimensions (Surface Mount) 0.350 (8.89) 0.320 (8.13) 0.350 (8.89) 0.320 (8.13) 0.260 (6.60) 0.240 (6.10) 0.260 (6.60) 0.240 (6.10) 0.390 (9.90) 0.332 (8.43) 0.070 (1.77) 0.040 (1.02) 0.070 (1.77) 0.040 (1.02) 0.320 (8.13) 0.320 (8.13) 0.014 (0.36) 0.010 (0.25) 0.014 (0.36) 0.010 (0.25) 0.200 (5.08) 0.115 (2.93) 0.200 (5.08) 0.115 (2.93) 0.100 (2.54) 0.015 (0.38) 0.012 (0.30) 0.008 (0.20) 0.025 (0.63) 0.020 (0.51) 0.020 (0.50) 0.016 (0.41) 0.100 (2.54) 0.100 [2.54] 15° Package Dimensions (0.4" Lead Spacing) 0.035 (0.88) 0.006 (0.16) 0.020 (0.50) 0.016 (0.41) 0.012 (0.30) Recommended Pad Layout for Surface MountLeadform 0.350 (8.89) 0.320 (8.13) 0.070 (1.78) 0.060 (1.52) 0.260 (6.60) 0.240 (6.10) 0.425 (10.79) 0.070 (1.77) 0.040 (1.02) 0.100 (2.54) 0.305 (7.75) 0.014 (0.36) 0.010 (0.25) 0.030 (0.76) 0.200 (5.08) 0.115 (2.93) 0.100 (2.54) 0.015 (0.38) 0.020 (0.50) 0.016 (0.41) 0.012 (0.30) 0.008 (0.21) 0.100 [2.54] 0.425 (10.80) 0.400 (10.16) Note: All dimensions are in inches (millimeters). 6 H11AAX-M Rev. 1.0.0 www.fairchildsemi.com H11AA1-M, H11AA2-M, H11AA3-M, H11AA4-M AC Input/Phototransistor Optocouplers Mechanical Dimensions H11AA1-M, H11AA2-M, H11AA3-M, H11AA4-M AC Input/Phototransistor Optocouplers Ordering Information Option/Order Entry Identifier Description S Surface Mount Lead Bend SR2 Surface Mount; Tape and Reel T 0.4" Lead Spacing V VDE 0884 TV VDE 0884, 0.4" Lead Spacing SV VDE 0884, Surface Mount SR2V VDE 0884, Surface Mount, Tape & Reel Marking Information 1 V 3 H11AA1 2 X YY Q 6 4 5 Definitions 1 Fairchild logo 2 Device number 3 VDE mark (Note: Only appears on parts ordered with VDE option – See order entry table) 4 One digit year code, e.g., ‘3’ 5 Two digit work week ranging from ‘01’ to ‘53’ 6 Assembly package code *Note – Parts that do not have the ‘V’ option (see definition 3 above) that are marked with date code ‘325’ or earlier are marked in portrait format. 7 H11AAX-M Rev. 1.0.0 www.fairchildsemi.com 12.0 ± 0.1 4.5 ± 0.20 2.0 ± 0.05 Ø1.5 MIN 4.0 ± 0.1 0.30 ± 0.05 1.75 ± 0.10 11.5 ± 1.0 21.0 ± 0.1 9.1 ± 0.20 Ø1.5 ± 0.1/-0 10.1 ± 0.20 0.1 MAX 24.0 ± 0.3 User Direction of Feed Reflow Profile (White Package, -M Suffix) 300 280 260 240 220 200 180 160 °C 140 120 100 80 60 40 20 0 260°C >245°C = 42 Sec Time above 183°C = 90 Sec 1.822°C/Sec Ramp up rate 33 Sec 0 60 120 180 270 360 Time (s) 8 H11AAX-M Rev. 1.0.0 www.fairchildsemi.com H11AA1-M, H11AA2-M, H11AA3-M, H11AA4-M AC Input/Phototransistor Optocouplers Carrier Tape Specifications TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. FACT Quiet Series™ GlobalOptoisolator™ GTO™ HiSeC™ I2C™ i-Lo™ ImpliedDisconnect™ IntelliMAX™ ISOPLANAR™ LittleFET™ MICROCOUPLER™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ Across the board. Around the world.™ The Power Franchise® Programmable Active Droop™ ACEx™ ActiveArray™ Bottomless™ Build it Now™ CoolFET™ CROSSVOLT™ DOME™ EcoSPARK™ E2CMOS™ EnSigna™ FACT™ FAST® FASTr™ FPS™ FRFET™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerEdge™ PowerSaver™ PowerTrench® QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ μSerDes™ ScalarPump™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TCM™ TinyBoost™ TinyBuck™ TinyPWM™ TinyPower™ TinyLogic® TINYOPTO™ TruTranslation™ UHC™ UniFET™ UltraFET® VCX™ Wire™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I20