Waterproof Circular Connectors Conforming to JIS-B-6015 and MIL-DTL-5015 CE02-6A Series ◆ OUTLINE Conforming Standard JIS B 6015 MIL-DTL- 5015 CE02-6A series is a waterproof plug connector conforming to JIS-B-6015, a Japanese standard for electrical equipment for industrial tool machines, which has a ground contact to protect a circuit. This plug conforms to MILDTL-5015, a US military standard, as well then it is intemateable with D/MS series connectors available from our product lines. CE02-6A plug is suitable for the factory automation equipment, the tool machines and the electrical Wa t e r p r o o f IP 67 Lock Type Threaded Coupling equipment in industry using under the rugged circumstances of moisture, oil and dust. ◆ FEATURE 1. First Make-Last Break Contact CE02-6A plug has a piece of premating ground contact having conductivity with the shell to protect a circuit. This contact will be connected with the mating half contact first before the other contacts and will unmate last on unmating the connectors. 2. MIL-DTL-5015 The connectors are intermateable with MIL-DTL-5015 style connectors commonly used on the existing factory automation and other electrical equipment. 3. Class IP67 Protection This plug is designed to offer protection against moisture and oil. A gasket located between the coupling ring and the receptacle shell seals the connection. The waterproof backshells and cable clamps are available to complete the sealed connection. Mating with CE02-2A, D/MS3102A and CE05-2A receptacles will meet class IP67 protection. ◆ SPECIFICATIONS Service Rating INST A D Contact Size ＃ 16 ＃ 12 ＃8 Rated Current Rated Voltage Dielectric Withstanding Voltage 13A / Contact 23A / Contact 46A / Contact 200V AC(r.m.s.) 500V AC(r.m.s.) 900V AC(r.m.s.) 250V DC 700V DC 1,250V DC 1000V AC(r.m.s.) at 1 minute. 2000V AC(r.m.s.) at 1 minute. 2800V AC(r.m.s.) at 1 minute. Insulation Resistance 5000M Ω min. at 500V DC Waterproof Rating IP67 Operating Temperature － 40℃ to ＋ 125℃ ◆ MATERIAL / FINISH RoHS Compliant Compliant Item Material / Finish Contact Copper Alloy / Silver Plating Insert Diallyl Phthalate Resin (Blue) Shell Aluminum Alloy, Zinc Plating / Trivalent Chromium Treatment (Black) Coupling Ring Aluminum Alloy, Zinc Plating / Trivalent Chromium Treatment (Black) Retaining Ring Copper Alloy / Nickel Plating Earth Rag Copper Alloy / Silver Plating Gasket Synthetic Rubber ◆ APPLICABLE CABLE SIZE Contact 140205 Applicable Cable Size Size Bore of Solder Cup Size ＃ 16 1.76mm ＃ 22 ～＃ 16 ＃ 12 2.85mm ＃ 14 ～＃ 12 ＃8 5.21mm ＃ 10 ～＃ 8 Nominal Sectional Area Maximum Outer Diameter 3.50mm2 2.5mm 1.25mm2 8.00mm2 1.6mm 4.5mm ◎ Specifications and/or dimensions in this catalog are subject to change without notice. ◎ Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp CE02-6A Series １８−１０ ２０−１５ １８−１２ １０SL Insert No. 10SL Ｃ Ａ ＡＣ Ｃ Ｂ Ｂ Arrangement Ｃ Ｃ Ｂ Ｄ Ａ Ａ Ｂ Ｃ Ｂ Ｂ Ａ Ａ Ｃ Ａ Number of Ｄ Ａ Contact ＡＤ Ａ ＡＣ Ｃ Ｂ Ｂ Ｄ Ｂ Ground Contact Ｃ Ｂ Ｃ Ｋ Ｊ Ｕ Ｎ Ｈ Ｐ Ｒ Ｓ Ｇ ２２−１４ C ＬC Ｌ Ｄ Ｌ Ｌ Ｔ Ｔ Ｕ Ｕ Ａ Ａ Ｍ Ｍ Ｂ Ｌ Ｐ Ｐ Ｓ Ｇ Ｇ C Ｊ ＤC ＬC ＬC Ｊ Ｔ Ｅ Ｄ Ｅ Ｒ Ｆ Ｆ Ｋ Ｎ Ｕ Arrangement Ｒ Ｓ Ｈ Ｈ Ｈ Ｌ Ａ Ｍ Ｓ Ｇ ＲＨ Ｂ Ｇ Ｃ Ｂ Ｂ Ｄ Ｄ Ｃ Ｃ Ｅ Ａ Ｄ Ｂ Ｆ Ａ Ｆ Ｅ Ｅ Ｄ Ｄ Ａ Ａ Ｂ Ｂ Ｅ Ｆ ＥＡ D Ｆ ＣＢ Ａ Ｕ Ｍ Ｂ A Ｅ Ｅ Ｂ Ｃ D D C Ｅ C Ｄ F Ｇ Ｇ Ｃ D Ｃ Ｆ Ｆ Ａ Ｅ Ｄ A F F BC E E B C C G G Ｅ Ｔ Ｐ ＤＳ ＨＲ Ｇ Ｆ ＬC Ｐ C ＳＤ Ｒ Ｅ Ｇ Ｆ C C Ｅ C Ｄ ２２−２２ B B C ＃ 16 A B Ｇ Ｄ Ｃ F A G C A A B B H H F F G H A H BC B C B D D ２２−２３ C C E C D ＃8 (83.7A) H G B H Ａ H E C Ｇ Ｇ 4 8 N D D Service Rating A ２２−２３ ２２−２２ ２２−２２２２−２２ ２２−２３ A 13A (88.9A) D D Ｇ F B 46A (125.1A) D Ｃ C D DD A Ｗ Ｗ Ｙ ＸＹ Ｘ Ｘ 10SL-3 18-10 W ＃ 12 ／ 4 18-12 ＃ 16 ／ 6 80 ゜ 20-29 ＃ 16 ／ 17 80 ゜ 20-15 22-14 22-22 22-23 24-10 ＃ 12 ／ 7 ＃ 16 ／ 19 ＃ 8／ 4 ＃ 12 ／ 8 ＃ 8／ 7 35 ゜ X Y 120 ゜ 240 ゜ 80 ゜ Ｅ Ｇ Ｄ Ｄ Ｅ ＤＣ C Ａ ＡＦ Ａ Ｂ Ｇ Ｅ Ｇ Ｂ Ｂ ＧＧ Ｅ ＣＤ Ｃ Ｄ Ｂ Ｅ Ｂ Ｅ Ｃ Ｃ Ｄ 24-10（G） Ｆ Ｂ ＥＢ ＥＧ Ｆ Ｆ Ｆ Ａ ＢＥＥ Ｇ ＥＤ Ｃ Ｄ Ｄ Ａ D Ｃ Ｇ Ｂ Ｇ Ｇ Ａ Ａ Ａ Ｆ Ｃ Ｃ Ｃ Ｆ Ｆ D DD D ２４−１０ Ｂ Ｂ ＥＢ ＥＧ Ｄ Ｄ Ａ Ａ G Ａ G Ｇ Ｂ ２４−１０ ＢＥ Ｇ ２４−１０ Ｂ ２４−１０ ２４−１ Ｄ Ｃ Ｃ Ｃ ＃8 D ２４−１０ ２４−１０ 7 G D D GG G G G ２４−１０ ２４−１０ ２４−１０ A 46A (167.4A) ＃８ ＃４ ＃０ Ｋ−５１１７７０ （２／ Ｋ−５１１７７ ＃８ ＃０Ｋ−５１ ＃０ ＃４ ＃４ ＃０ Ｋ−５１１ Ｋ− Ｋ−５１１７７０ （２／２） Ｋ−５１１７７０ （２／ Ｋ−５１１７７０ （２／２） Ｋ−５１１７７０ （２／２） Ｋ−５１１７７０ （２／２） as indicated or as shown in the diagram below. Z C Ｌ 280 ゜ 250 ゜ C Ｌ 280 ゜ 280 ゜ 110 ゜ Ｃ ＦＡ Ｆ ＦＡ Ｋ−５１１７７０（２／２） 80 ゜ 80 ゜ Ｅ キー変換位置記号 To avoid cross-mating problems in applications requiring the use of more than one connector of the same size and insert arrangement, alternate insert positions are available キー変換位置記号 キー変換位置記号 キー変換位置記号 キー変換位置記号 キー変換位置記号 Alternate Insert Key Position ＃ 16 ／ 3 Ｆ Ｂ ＃１６ ＃１２ ＃８ ＃４ ＃１６ ＃０ ＃１２ ＃８ ＃１６ ＃８ ＃１６ ＃１２ ＃１６ ＃８ ＃１２ ＃４ ＃１２ ＃０ ＃４ ○ Alternate Insert Positions キー変換位置記号 Contact Size/ Number of Contact Ｊ ＃１６ ＃１２ ＃８＃１６ ＃４ ＃８ ＃０ ＃１６ ＃１２ ＃４＃８44 ＃４ ＃ Contact Size Symbol ＃１６＃１２ ＃１２＃８ ＃１６ ＃１２ キー変換位置記号 キー変換位置記号 キー変換位置記号 キー変換位置記号 キー変換位置記号 Insert No. Ｇ ＥB H 46A (167.4A) ＹＸ Ｙ Ｙ Ｘ Ｙ Ｘ Ｘ Ｘ * Front view of pin contact and key position is standard. ＷＺ B D Ｆ 7 23A (90.1A) Ｅ 13A (81.7A) ２４−１０ A(Others) Ｔ Ｆ Ｄ Ｂ * The sign " ● " stands for the ground contact. ＃１６ ＃１２ * Current capasity shows the maximum permitted current per contact. Values in parenthesis show the total current capacities in each one of respective connectors. Ｚ G ＃8 ２２−２３ ２２−２３ ２２−２３ D(H) Ｇ Ｈ E C C C D ＃ 12 19 ２２−１４ ２２−２２ ２２−１４２２−１４ ２２−２２ E E Ｓ Ｊ Ｃ A F Ａ Ａ Ｅ Ｅ Ｄ N E B Ｇ Ｃ A Ｆ Ｆ A B H Ｂ 17 Ｄ G Ｂ Ｅ Ｄ Ｆ 22-10（D） B Ｇ Ａ Ａ Ａ Ａ Ｌ ＢＭ ＣＭ Ｂ Ｃ Ｂ Ｌ Ｎ Ｍ Ｃ Ｂ Ｎ Ｌ Ｃ Ｎ Ｋ Ｄ Ｔ Ｐ Ｄ Ｐ Ｎ Ｋ Ｄ Ｔ Ｋ ＰＴ Ｄ Ｐ Ｔ Ｔ Ｓ Ｓ Ｔ Ｅ Ｅ ＧＳ Ｇ Ｊ Ｔ Ｓ Ｊ Ｅ Ｇ Ｊ Ｅ Ｆ Ｇ Ｈ Ｆ Ｈ Ｈ Ｆ Ｈ Ｆ Ｃ Ｍ Ｌ Ｄ Ｐ Ｋ Ｔ 7 ＥD B A F G Ｈ Ｄ ＥＣ Ｄ Ｎ D E C D Ｔ Ｌ Ａ Ｋ Ｔ Ｂ Ａ Ｆ Ａ Ａ Ａ Ａ Ａ Ｂ Ｃ Ｂ Ｍ Ｂ ＭＣ Ｌ Ｂ Ｍ Ｃ Ｂ Ｎ Ｌ Ｃ Ｃ Ｌ Ｎ Ｎ Ｄ Ｐ Ｎ Ｎ Ｄ Ｔ Ｐ Ｔ Ｋ Ｐ Ｔ ＤＫ Ｄ Ｐ ＤＫ Ｐ Ｔ Ｔ Ｇ Ｔ Ｅ Ｔ Ｓ Ｔ Ｓ Ｓ Ｊ Ｅ Ｇ Ｊ Ｅ Ｇ Ｊ ＦＥ Ｇ Ｇ Ｆ AＥ ＡＦ A Ｆ Ｈ A Ｆ Ｈ A Ｆ Ｈ G G ＦF 23AＦ E Ｂ Ｅ ＰＧ Ｇ Ｃ Ａ ２０−２９ ２０−２９２０−２９ Ｍ Ｂ Ａ Ｃ ＃ 16 B H Ｓ Ｆ ＃ 12 Ｍ Ｌ Ｍ Ｌ ＫＢ Ｔ Ｋ Ｔ Ｓ Ｊ Ｓ A Ｊ Ｈ F Ｈ Ｃ Ｎ Ｇ Ａ Ｂ Ｇ Ｃ Ｄ Ｄ D Ｔ Ｅ ＪＤ 22-23 Ground Contact ＷＷ Ｗ Ｚ Ｗ ＺCurrent Ｚ Ｗ ＺCapasity Ｃ D Ｅ Ｇ 13A (43.6A) C D Ｇ Ｂ Ｅ A Ｄ A Ｂ ＥＫ ＦＡ Ａ Ｆ D Ａ Ｂ Ｃ B H B Ｅ Ｂ Ｄ Ｃ Ｌ Ｆ Ｅ Ａ Ｂ Ｃ Ｆ Ｂ Ｂ Ｅ AD A G E AD A D Ｂ A Ｄ 22-22 A A Ａ Ａ Ａ Ｄ Ｂ Ｎ Ｆ Ｆ Ａ 23A (62.5A)Ｂ B D ＡD Ｆ Ｅ Ａ 20-29 ２０−２９ Ａ ２０−１５ ２０−１５２０−１５ ２０−２９ Ｆ Ａ ＦＡ Ｂ Ｆ Ｍ 6 A Contact Size ２２−１４ ２２−１４ Ｚ ＬC ＬC Ｙ Ｄ Ｂ Ｃ Ｅ 20-15 ２２−１４ ２２−１４ ２２−２２ ２２−２２ ２２−２３ ２２−２３ Ｄ ２２−２３Ｃ ２２−１４ ２２−２２ Ｄ Ｄ ２２−１４ ２２−２２ ２２−２３ Ｄ Ｃ ２２−２３ ２２−１４ ２２−２２ CＪ Ｐ Ｔ Ｆ Ａ Ｅ Ｆ 4 ＤＡ Ｌ Ｍ Ｂ Ｋ Ｕ Ｎ Ａ 3 C Number of Contact ＬC Ｂ Ｃ Ｆ Ｅ ＤＡ ＃ 16 20-14 Ｎ ＢＫ Insert Ｎ Ａ Ｄ ＃ 12 C Insert No. Ｋ Ｋ Ｊ Ｊ C Ｅ Ｆ Ｃ Ｂ Ｃ 13A (29.2A) Ｂ Ｔ ＤＡ Ｄ Ｄ Ｂ Ｃ ＤＢ Ｃ Ｃ Ｃ Ａ Ｌ Ａ Ｌ Ａ Ｌ Ｍ Ａ Ｌ Ｍ Ｍ Ｋ Ｂ Ｍ ＬＢ D Ｎ Ｋ ＫA Ｂ Ｍ Ｕ Ｂ Ｎ Ｕ Ｎ ＫＵ Ｕ ＫＮ Ｕ Ｎ Ｊ Ｔ Ｐ C Ｊ Ｊ Ｐ Ｔ ＰＴ C C Ｊ Ｔ Ｐ C Ｊ Ｄ Ｔ Ｐ Ｈ Ｒ Ｓ Ｄ Ｈ ＳＤ Ｒ Ｓ ＨＲ Ｅ Ｄ Ｈ Ｓ ＥＲ Ｈ Ｅ Ｒ Ｓ Ｇ Ｆ Ｅ Ｇ Ｆ Ｇ Ｆ Ｇ Ｆ Ｇ Ｆ Ａ Ｍ １８−１２ Ｆ ２０−１５ １８−１２１８−１２ ２０−１５ Ａ Ｄ ＢＢ Ｃ 18-12 ＃ 16 ＢＣ Current Capasity Ｌ Ｃ ＤＢ Ｄ Ａ Ｃ Ｂ Service Rating Ａ Ａ Ｂ Contact Size Ｃ Ｃ 18-10 １８−１０ １８−１０１８−１０ １８−１２ １８−１０ １８−１２ Ｆ Ｄ １８−１０ Ａ １０SL １０SL １０SL Insert Ｅ Ａ １０SL １０SL ２０−２９ ２０−１５ ２０−１５ ２０−２９ ２０−２９ ２０−１５ ２０−２９ １８−１２ １８−１２ ２０−１５ ２０−２９ １８−１２ ２０−１５ ２０−２９ １８−１２ １８−１０ １８−１０ １８−１２ １８−１０ ○１０SL Insert Arrangements １８−１０ １０SL １０SL １８−１０ １０SL Ｗ Ｘ 280 ゜ 280 ゜ Ｚ Ｙ Front View of Pin Insert Ｚ Ｙ Ｗ Ｘ Front View of Socket Insert ◎ Specifications and/or dimensions in this catalog are subject to change without notice. ◎ Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 2 CE02-6A Series Unit：mm ○ Plug Connector CE0 2 -6 A18-12DSW-D ① ② ③ ④⑤ ⑥ A Thread F Gasket D Thread ⑦ φB φG J ① Shell Style 6A : Straight Plug ② Shell Size 10SL, 18, 20, 22 and 24 ③ Insert Arrangement Refer to page 2. ④ Ground Contact Refer to page 2. ⑤ Contact Style S : Socket Contact ⑥ Alternate Insert Key Positions Omit ⑦ Finish D：Trivalent Chromium Treatment(Black) : Standard Position W,X,Y,Z : Altenate Position E H max. C Part Number A CE02-6A10SL-3CS-D CE02-6A18-10DS-D L CE02-6A18-12DS-D 1 φB D E G H max. J 23.3 9/16-24UNEF-2A 7.5 12.5 7.0 13.2 1 1/8-18UNEF-2B 34.1 33.7 1-20UNEF-2A 11.7 23.5 34.1 1 1/8-18UNEF-2A 12.2 26.8 34.1 1 1/4-18UNEF-2A 12.2 29.9 Ｗ Thread CL 1 1/4-18UNEF-2B 37.3 A Thread F J CE02-6A20-29NS-D Gasket Ｖ Thread CE02-6A22-14NS-D D Thread 0.8 C 22.2 0.5 CE02-6A20-15DS-D 0.5 O Ring 1 3/8-18UNEF-2B φC CE02-6A22-22DS-D φA B 5/8-24UNEF-2B CE02-6A22-23DS-D CE02-6A24-10DS-D CL 7.5 19.0 7.0 10.0 19.0 7.5 7.85 min. φD 43.6 φB φG 19.0 7.0 7.0 40.5 1 1/2-18UNEF-2B （Complete Thread Length） CE02-6A24-10GS-D 7.5 0.5 36.6 1 3/8-18UNEF-2A (Gripping Surfaces for Wrench) 13.4 32.8 8.5 19.4 8.5 ○ WaterproofE Straight Backshell H max. Ｖネジ 1.5 Ａ C C(D) 0.7 CE0 2 -1 8 BS-S-D Ｇ 0.7 φF L （ブッシング外径） 0.5 Ｗ Thread CL B：Backshell ③ Style S : Straight ④ Waterproof S : Waterproof ⑤ Finish D：Trivalent Chromium Treatment(Black) 0.5 CL φC φC 10SL, 18, 20, 22 and 24 ② Model D Ｖ Thread O Ring φB 0.8 φB φA φＥ 1 ① Shell Size （直形プラグ） Ｄ／ＭＳ３１０６Ａ２２−××××（Ｄ１９０ φA φB （ブッシング内径） ① ②③ ④ ⑤ 7.85 min. φD （Complete Thread Length） 図番 0.5 (Gripping Surfaces for Wrench) Ｋ−５１１７６１（１／２） 第 Waterproof straight backshell is used to retain the cable when a conduit is not used. L A CE02-10SLBS-S-D (D) Ａ 0.7 18 ＶネジCE02-18BS-S-D C 1.5 20 CE02-20BS-S-D 20.0 18.6 31.0 30.5 35.0 35.0 22 35.0 40.5 10SL φF （ブッシング内径） φB 24 CE02-22BS-S-D CE02-24BS-S-D 0.7 Part Number C D V 6.5 6.6 17.9 9/16-24UNEF-2B 5/8-24UNEF-2A 10.5 16.3 26.7 1-20UNEF-2B 1-20UNEF-2A 10.9 17.8 31.6 1 1/8-18UNEF-2B 1 3/16-18UNEF-2A 36.5 10.9 17.8 32.4 1 1/4-18UNEF-2B 1 3/16-18UNEF-2A 40.0 12.2 21.0 36.6 1 3/8-18UNEF-2B 1 7/16-18UNEF-2A Ｇ Shell Size B W φＥ （ブッシング外径） ◎ Specifications and/or dimensions in this catalog are subject to change without notice. ◎ Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp D 3 （直形プラ CE02-6A Series Unit：mm ○ Waterproof Cable Clamp CE3 0 5 7 -1 0 A-1-D ② ③ Ｖ Thread ③ Finish D：Trivalent Chromium Treatment (Black) 0.7 Rubber Bushing (Refer to the applicable cable size.) Ｇ ② Bushing Size 1.5 (D) 0.7 φF 4A, 10A, 12A, 16A Ａ C (Inner Dimension of Bushing) ① Clamp Size φB ① φＥ ( Outer Dimension of Bushing ) CE3057- □□ A- □ -D is a waterproof cable clamp for use with a plug. The cable clamp has a waterproof rubber bushing. Make sure to use a cabtyre cable meeting one of the applicable cable size ranges as shown below. The cable clamp should be used together with a waterproof backshell. CE3057-4A-1-D Applicable Shell Size A B C 10SL,12S 20.62 20.6 10.31 Ｂ１ CE3057-10A-1-D CE3057-10A-2-D 18 23.83 30.1 CE3057-12A-1-D 20 E （41.3） 品 名 （41.3） F表−１ 8.0 5.6 22.2 Bushing P/N 5/8-24UNEF-2B 15.8 13.0 20.6 24.6 CE3420-4-1 5.6 CE3420-10-1 14.1 CE3420-10-2 11.0 CE3420-10-3 8.7 CE3420-12-1 16.0 CE3420-12-2 13.0 CE3420-12-3 10.0 CE3420-12-7 17.0 CE3420-16-1 19.1 CE3420-16-2 15.5 CE3420-16-6 20.0 CE3420-16-7 13.5 7.5 12.9 38.3 MS3057-4W 15.5 22.2 38.5 MS3057-10W 18.6 26.9 39.3 MS3057-12W 23.4 33.2 40.0 MS3057-16W A3 φB 10.31 20.62 22.20 φC 35.0 V 10.31 10.31 （41.3） 19.0 37.3 1 3/16-18UNEF2B ＣＥ３０５７−８Ａ−１−Ｄ CE3057-12A-3-D 10.0 16S,16 23.83 27.8 10.31 CE3057-12A-7-D 17.0 ＣＥ３０５７−８Ａ−２−Ｄ CE3057-16A-1-D 19.1 ＣＥ３０５７−１０Ａ−１−Ｄ CE3057-16A-2-D 15.5 23.83 30.1 10.31 18 ＣＥ３０５７−１０Ａ−２−Ｄ CE3057-16A-4-D 21.5 24 ＣＥ３０５７−１０Ａ−３−Ｄ 26.19 42.1 10.31 （41.3） 23.8 42.9 1 7/16-18UNEF-2B CE3057-16A-6-D 28 20.0 ＣＥ３０５７−１２Ａ−１−Ｄ CE3057-16A-7-D 13.5 ＣＥ３０５７−１２Ａ−２−Ｄ CE3057-16A-8-D 12.520 35 23.83 10.31 ＣＥ３０５７−１２Ａ−３−Ｄ 22 ＣＥ３０５７−１２Ａ−７−Ｄ ○ Waterproof Rubber Bushing ＣＥ３０５７−１６Ａ−１−Ｄ ＣＥ３０５７−１６Ａ−２−Ｄ CE3420-10-1 ＣＥ３０５７−１６Ａ−４−Ｄ 24 26.19 42.1 10.31 ＣＥ３０５７−１６Ａ−６−Ｄ 28 ① ② ＣＥ３０５７−１６Ａ−７−Ｄ ① Cable Clamp Size 4, 10, 12, 16 ＣＥ３０５７−１６Ａ−８−Ｄ ② Bushing Size Refer to table 1. ＣＥ３０５７−２０Ａ−１−Ｄ 27.79 51.6 11.91 ＣＥ３０５７−２０Ａ−２−Ｄ 32 CE3420- □□ A- □ is the rubber bushing which combines with the ＣＥ３０５７−２０Ａ−３−Ｄ cable clamp(CE3057- □□ A- □ -D) to constrict the cable for waterproof. ＣＥ３０５７−２４Ａ−１−Ｄ Table 1 29.4 56.4 13.5 ＣＥ３０５７−２４Ａ−２−Ｄ 36 φA φB φC D Friction Washer Part Number ＣＥ３０５７−２４Ａ−３−Ｄ 22 23.83 G CE3420-4-1 有効CE3420-10-1 合 全 長 外 径 ねじ長さ （Ｄ） Ａ1-20UNEF-2B Ｂ シェルサイズ Ｃ CE3420-10-2 11.0 31.7 適 14.1 8.7 10SL,12S ＣＥ３０５７−４Ａ−１−Ｄ 16.0 ＣＥ３０５７−６Ａ−１−Ｄ 14S CE3057-10A-3-D CE3057-12A-2-D 10.31 （D） (41.3) (41.3) CE3420-10-3 CE3420-12-1 CE3420-12-2 Applicable Cable φ 3.6 ～φ 5.6 φ 10.5 ～φ 14.1 E F φ 8.5 ～φ 11.0 φ 6.5 ～φ 5.68.7 22.2 8.0 φ 12.5 ～φ 16.0 9 27 10.8 φ 9.5 ～φ 13.0 1210.0 CE3420-12-3 φ 6.8 ～φ 29.4 (41.3) 14.0 CE3420-12-7 φ 14.5 ～φ 10.5 17.0 CE3420-16-1 φ 15.0 ～φ 14.1 19.1 CE3420-16-2 φ 13.0 ～φ 15.5 11 31.7 (41.3) 15.8 CZY005-GB-3 φ 19.1 ～φ 21.5 8.7 CE3420-16-6 φ 18.5 ～φ 20.0 16 CE3420-16-7 φ 11.5 ～φ 13.5 13 12.5 CZY005-GB-5 φ 10.5 ～φ 37.3 (41.3) 19.0 10 17 19.1 15.5 D 21.5 42.9 (41.3) 23.8 20 １３．５ １２．５ 23.8 32.0 26.6 51.6 (43) 22.5 32.5 (45.8) 34.6 29.6 58.0 ３１ The fliction washer is available separately. ◎ Specifications and/or dimensions in this catalog are subject to change without notice. ◎ Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp A3 4 G 取付ねじ Ｖ ５ ８−２４ＵＮＥＦ−２Ｂ ３ ４−２０ＵＮＥＦ−２Ｂ ７ ８−２０ＵＮＥＦ−２Ｂ 1-20UNEF-2B １１６３ −１８ＵＮＥＦ−２Ｂ １１６７ −１８ＵＮＥＦ−２Ｂ φA Part Number １４３−１８ＵＮＳ−２Ｂ Ｂ２ 2-18UNS-2B CE CE CE CE CE CE CE CE CE CE CE CE CE CZ CE Ｃ Ｃ CE CE CE CE CE Ａ