HD74LV07A Hex Buffers / Drivers with Open Drain Outputs REJ03D0231–0600 Rev.6.00 Dec 22, 2005 Description The HD74LV07A has six buffers / drivers with open drain outputs in a 14-pin package. Low-voltage and high-speed operation is suitable for the battery-powered products (e.g., notebook computers), and the low-power consumption extends the battery life. Features • • • • • • • VCC = 2.0 V to 5.5 V operation All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V) All outputs VO (Max.) = 5.5 V (@VCC = 0 V) All outputs VO (Max.) = 5.5 V (@VCC = 2.0 V to 5.5 V, Output “Z” state) Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C) Output current: ±8 mA (@VCC = 3.0 V to 3.6 V), ±16 mA (@VCC = 4.5 V to 5.5 V) Ordering Information Package Code (Previous Code) Package Abbreviation Taping Abbreviation (Quantity) Part Name Package Type HD74LV07AFPEL SOP–14 pin(JEITA) PRSP0014DF-B (FP–14DAV) FP EL (2,000 pcs/reel) HD74LV07ARPEL SOP–14 pin(JEDEC) PRSP0014DE-A (FP–14DNV) RP EL (2,500 pcs/reel) HD74LV07ATELL TSSOP–14 pin T PTSP0014JA-B (TTP–14DV) Note: Please consult the sales office for the above package availability. ELL (2,000 pcs/reel) Function Table Input A L H Note: H: High level L: Low level Z: High impedance Rev.6.00 Dec 22, 2005 page 1 of 7 Output Y L Z HD74LV07A Pin Arrangement 1A 1 14 VCC 1Y 2 13 6A 2A 3 12 6Y 2Y 4 11 5A 3A 5 10 5Y 3Y 6 9 4A GND 7 8 4Y (Top view) Absolute Maximum Ratings Symbol Ratings Unit Supply voltage range Input voltage range*1 Output voltage range*1, 2 Item VCC VI VO V V V Input clamp current Output clamp current Continuous output current IIK IOK IO –0.5 to 7.0 –0.5 to 7.0 –0.5 to VCC + 0.5 –0.5 to 7.0 –20 ±50 ±35 mA mA mA ±50 mA 785 500 –65 to 150 mW Continuous current through VCC or GND Maximum power dissipation at 3 Ta = 25°C (in still air)* Storage temperature ICC or IGND PT Tstg Conditions Output: L VCC: OFF or Output: Z VI < 0 VO < 0 VO = 0 to VCC SOP TSSOP °C Notes: The absolute maximum ratings are values, which must not individually be exceeded, and furthermore, no two of which may be realized at the same time. 1. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 2. This value is limited to 7.0 V maximum. 3. The maximum package power dissipation was calculated using a junction temperature of 150°C. Rev.6.00 Dec 22, 2005 page 2 of 7 HD74LV07A Recommended Operating Conditions Item Supply voltage range Input voltage range Output voltage range Output current Symbol VCC VI VO IOL Input transition rise or fall rate ∆t / ∆v Operating free-air temperature Ta Min 2.0 0 0 — — — — 0 0 0 –40 Max 5.5 5.5 5.5 50 2 8 16 200 100 20 85 Unit V V V µA mA Conditions VCC = 2.0 V VCC = 2.3 to 2.7 V VCC = 3.0 to 3.6 V VCC = 4.5 to 5.5 V VCC = 2.3 to 2.7 V VCC = 3.0 to 3.6 V VCC = 4.5 to 5.5 V ns/V °C Note: Unused or floating inputs must be held high or low. Logic Diagram A Y DC Electrical Characteristics Ta = –40 to 85°C Item Input voltage Symbol VIH Input current IIN Off state output current IOZ VCC (V)* 2.0 2.3 to 2.7 3.0 to 3.6 4.5 to 5.5 2.0 2.3 to 2.7 3.0 to 3.6 4.5 to 5.5 Min to Max 2.3 3.0 4.5 0 to 5.5 Min to Max Quiescent supply current ICC 5.5 VIL Output voltage VOL Min 1.5 VCC × 0.7 VCC × 0.7 VCC × 0.7 — — — — — — — — — — Typ — — — — — — — — — — — — — — Max — — — — 0.5 VCC × 0.3 VCC × 0.3 VCC × 0.3 0.1 0.4 0.44 0.55 ±1 2.5 Unit V µA µA IOL = 50 µA IOL = 2 mA IOL = 8 mA IOL = 16 mA VIN = 5.5 V or GND VO = 5.5 V — — 20 µA VIN = VCC or GND, IO = 0 V Test Conditions 0 — — 5 µA VI or VO = 0 to 5.5 V IOFF Output leakage current Input capacitance CIN 3.3 — 2.3 — pF VI = VCC or GND Note: For conditions shown as Min or Max, use the appropriate values under recommended operating conditions. Rev.6.00 Dec 22, 2005 page 3 of 7 HD74LV07A Switching Characteristics VCC = 2.5 ± 0.2 V Item Symbol tPLH Propagation delay time tPHL Ta = 25°C Min Typ Max — 4.7 10.4 — 9.5 15.2 — 5.4 10.4 — 7.9 15.2 Ta = –40 to 85°C Min Max 1.0 13.0 1.0 18.0 1.0 13.0 1.0 18.0 Ta = 25°C Min Typ Max — 4.0 7.1 — 7.3 10.6 — 4.3 7.1 — 5.8 10.6 Ta = –40 to 85°C Min Max 1.0 8.5 1.0 12.0 1.0 8.5 1.0 12.0 Ta = 25°C Min Typ Max Ta = –40 to 85°C Min Max Unit ns Test Conditions CL = 15 pF CL = 50 pF CL = 15 pF CL = 50 pF FROM (Input) TO (Output) A Y VCC = 3.3 ± 0.3 V Item Symbol tPLH Propagation delay time tPHL Unit ns Test Conditions CL = 15 pF CL = 50 pF CL = 15 pF CL = 50 pF FROM (Input) TO (Output) A Y VCC = 5.0 ± 0.5 V Item Symbol tPLH Propagation delay time tPHL — — — — 3.3 5.6 3.4 4.1 5.5 7.5 5.5 7.5 1.0 1.0 1.0 1.0 Unit 6.5 8.5 6.5 8.5 ns Test Conditions CL = 15 pF CL = 50 pF CL = 15 pF CL = 50 pF FROM (Input) TO (Output) A Y Operating Characteristics CL = 50 pF Item Symbol VCC (V) Power dissipation capacitance CPD 3.3 5.0 Min — — Ta = 25°C Typ 9.6 11.4 Max — — Unit pF Test Conditions f = 10 MHz Noise Characteristics CL = 50 pF Item Symbol VCC (V) Quiet output, maximum dynamic VOL VOL (P) Quiet output, minimum dynamic VOL Ta = 25°C Unit 3.3 Min — Typ 0.3 Max 0.8 VOL (V) 3.3 — –0.1 –0.8 V High-level dynamic input voltage VIH (D) 3.3 2.31 — — V Low-level dynamic input voltage VIL (D) 3.3 — — 0.99 V Rev.6.00 Dec 22, 2005 page 4 of 7 V Test Conditions HD74LV07A Test Circuit VCC RL = 1 kΩ CL Note: CL includes the probe and jig capacitance. • Waveform − 1 Input tf 90% 50% VCC tr 10% 10% tPHL 90% 50% VCC VCC 0V tPLH VOH Output 50% VCC VOL + 0.3 V VOL Notes: 1. Input waveform: PRR ≤ 1 MHz, Zo = 50 Ω, tr ≤ 3 ns, tf ≤ 3 ns 2. The output are measured one at a time with one transition per measurement. Rev.6.00 Dec 22, 2005 page 5 of 7 HD74LV07A Package Dimensions JEITA Package Code P-SOP14-3.95x8.65-1.27 RENESAS Code PRSP0014DE-A *1 Previous Code FP-14DNV MASS[Typ.] 0.13g NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. F D 14 8 c *2 Index mark HE E bp Terminal cross section ( Ni/Pd/Au plating ) Reference Dimension in Millimeters Symbol Min 1 7 *3 e Z bp x M A L1 A1 θ L y Detail F JEITA Package Code P-SOP14-5.5x10.06-1.27 RENESAS Code PRSP0014DF-B *1 Previous Code FP-14DAV D E A2 A1 A bp b1 c c1 θ HE e x y Z L L1 Nom Max 8.65 9.05 3.95 0.10 0.14 0.25 1.75 0.34 0.40 0.46 0.15 0.20 0.25 0° 8° 5.80 6.10 6.20 1.27 0.25 0.15 0.635 0.40 0.60 1.27 1.08 MASS[Typ.] 0.23g D F 14 NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. 8 c HE *2 E bp Index mark Terminal cross section ( Ni/Pd/Au plating ) 1 Z 7 e *3 bp x Reference Dimension in Millimeters Symbol M A L1 A1 θ y L Detail F Rev.6.00 Dec 22, 2005 page 6 of 7 D E A2 A1 A bp b1 c c1 θ HE e x y Z L L1 Min Nom Max 10.06 10.5 5.50 0.00 0.10 0.20 2.20 0.34 0.40 0.46 0.15 0.20 0.25 0° 8° 7.50 7.80 8.00 1.27 0.12 0.15 1.42 0.50 0.70 0.90 1.15 HD74LV07A JEITA Package Code P-TSSOP14-4.4x5-0.65 RENESAS Code PTSP0014JA-B *1 Previous Code TTP-14DV MASS[Typ.] 0.05g D F 14 8 NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. HE c *2 E bp Index mark Terminal cross section ( Ni/Pd/Au plating ) 1 Reference Dimension in Millimeters Symbol 7 *3 Z bp x M L1 A e A1 θ L y Detail F Rev.6.00 Dec 22, 2005 page 7 of 7 D E A2 A1 A bp b1 c c1 θ HE e x y Z L L1 Min Nom Max 5.00 5.30 4.40 0.03 0.07 0.10 1.10 0.15 0.20 0.25 0.10 0.15 0.20 0° 8° 6.20 6.40 6.60 0.65 0.13 0.10 0.83 0.4 0.5 0.6 1.0 Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 205, AZIA Center, No.133 Yincheng Rd (n), Pudong District, Shanghai 200120, China Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145 Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510 © 2005. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .5.0