Order this document by MCR100/D SEMICONDUCTOR TECHNICAL DATA Reverse Blocking Triode Thyristors *Motorola preferred devices PNPN devices designed for high volume, line-powered consumer applications such as relay and lamp drivers, small motor controls, gate drivers for larger thyristors, and sensing and detection circuits. Supplied in an inexpensive plastic TO-226AA package which is readily adaptable for use in automatic insertion equipment. • • • • SCRs 0.8 AMPERE RMS 100 thru 600 VOLTS Sensitive Gate Trigger Current — 200 µA Maximum Low Reverse and Forward Blocking Current — 100 µA Maximum, TC = 125°C Low Holding Current — 5 mA Maximum Glass-Passivated Surface for Reliability and Uniformity G A K K G A CASE 29-04 (TO-226AA) STYLE 10 MAXIMUM RATINGS (TJ = 25°C unless otherwise noted.) Rating Peak Repetitive Forward and Reverse Blocking Voltage(1) (TJ = 25 to 125°C, RGK = 1 kΩ MCR100-3 MCR100-4 MCR100-6 MCR100-8 Forward Current RMS (See Figures 1 & 2) (All Conduction Angles) Symbol VDRM and VRRM Value Unit Volts 100 200 400 600 IT(RMS) 0.8 Amps ITSM 10 Amps I2t 0.415 A2s PGM 0.1 Watts PGF(AV) 0.01 Watt Peak Gate Current — Forward, TA = 25°C (300 µs, 120 PPS) IGFM 1 Amp Peak Gate Voltage — Reverse VGRM 5 Volts TJ –40 to +125 °C Tstg –40 to +150 °C — +230 °C Peak Forward Surge Current, TA = 25°C (1/2 Cycle, Sine Wave, 60 Hz) Circuit Fusing Considerations (t = 8.3 ms) Peak Gate Power — Forward, TA = 25°C Average Gate Power — Forward, TA = 25°C Operating Junction Temperature Range @ Rated VRRM and VDRM Storage Temperature Range Lead Solder Temperature ( 1/16I from case, 10 s max) t 1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. Preferred devices are Motorola recommended choices for future use and best overall value. Motorola Thyristor Device Data Motorola, Inc. 1995 1 THERMAL CHARACTERISTICS Symbol Max Unit Thermal Resistance, Junction to Case Characteristic RθJC 75 °C/W Thermal Resistance, Junction to Ambient RθJA 200 °C/W ELECTRICAL CHARACTERISTICS (TC = 25°C, RGK = 1 kΩ unless otherwise noted.) Characteristic Symbol Peak Forward or Reverse Blocking Current (VAK = Rated VDRM or VRRM) Max Unit — — 10 100 µA µA VTM — 1.7 Volts IDRM, IRRM TC = 25°C TC = 125°C Forward “On” Voltage(1) (ITM = 1 A Peak @ TA = 25°C) Gate Trigger Current (Continuous dc)(2) (Anode Voltage = 7 Vdc, RL = 100 Ohms) TC = 25°C IGT — 200 µA Gate Trigger Voltage (Continuous dc) (Anode Voltage = 7 Vdc, RL = 100 Ohms) (Anode Voltage = Rated VDRM, RL = 100 Ohms) TC = 25°C TC = –40°C TC = 125°C VGT — — 0.1 0.8 1.2 — Volts Holding Current (Anode Voltage = 7 Vdc, initiating current = 20 mA) TC = 25°C TC = –40°C IH — — 5 10 mA 1. Forward current applied for 1 ms maximum duration, duty cycle 2. RGK current is not included in measurement. p 1%. FIGURE 1 – MCR100-7, MCR100-8 CURRENT DERATING (REFERENCE: CASE TEMPERATURE) FIGURE 2 – MCR100-7, MCR100-8 CURRENT DERATING (REFERENCE: AMBIENT TEMPERATURE) 120 120 α α = CONDUCTION ANGLE 110 CASE MEASUREMENT POINT — CENTER OF FLAT PORTION 100 90 dc 80 70 α = 30° 60 60° 90° 120° 180° 50 α α = CONDUCTION ANGLE 100 TYPICAL PRINTED CIRCUIT BOARD MOUNTING 80 60 dc 40 α = 30° 60° 90° 120° 180° 20 40 0 0.1 0.2 0.3 0.4 IT(AV), AVERAGE ON-STATE CURRENT (AMP) 2 TA , MAXIMUM ALLOWABLE AMBIENT TEMPERATURE ( °C) TC, MAXIMUM ALLOWABLE CASE TEMPERATURE (° C) Min 0.5 0 0.1 0.2 0.3 0.4 IT(AV), AVERAGE ON-STATE CURRENT (AMP) Motorola Thyristor Device Data PACKAGE DIMENSIONS A B R STYLE 10: PIN 1. CATHODE 2. GATE 3. ANODE P L F SEATING PLANE K D X X G J H V C SECTION X–X 1 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. DIMENSION F APPLIES BETWEEN P AND L. DIMENSION D AND J APPLY BETWEEN L AND K MINIMUM. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. N N DIM A B C D F G H J K L N P R V INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.022 0.016 0.019 0.045 0.055 0.095 0.105 0.015 0.020 0.500 ––– 0.250 ––– 0.080 0.105 ––– 0.100 0.115 ––– 0.135 ––– MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.41 0.55 0.41 0.48 1.15 1.39 2.42 2.66 0.39 0.50 12.70 ––– 6.35 ––– 2.04 2.66 ––– 2.54 2.93 ––– 3.43 ––– CASE 29-04 (TO–226AA) Motorola Thyristor Device Data 3 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Literature Distribution Centers: USA: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. EUROPE: Motorola Ltd.; European Literature Centre; 88 Tanners Drive, Blakelands, Milton Keynes, MK14 5BP, England. JAPAN: Nippon Motorola Ltd.; 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan. ASIA PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Center, No. 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong. 4 ◊ Motorola Thyristor Device Data *MCR100/D* MCR100/D