Series C46F/C47F Optically Isolated up to 1.75A Bi-Directional AC/DC Solid-State Relay ELECTRICAL SPECIFICATIONS (25°C UNLESS OTHERWISE SPECIFIED) INPUT (CONTROL) SPECIFICATIONS Parameter Min Max Units Control Voltage Range (See Figures 1, 2 and Note 1) 3.8 32 Vdc 12 mAdc Input Current @ 5 V (See Figures 1 and 2) Must Turn-On Voltage 3.8 Vdc Must Turn-Off Voltage (Guaranteed Off) 1.5 Vdc Reverse Voltage Protection -32 Vdc OUTPUT (LOAD) SPECIFICATIONS Parameter DC Parameter Output Voltage Rating Output Current Rating (See Figure 3) Min Bi-directional Max Min Max Units C47F-10 50 C46F-10 ±50 Vdc C47F-20 90 C46F-20 ±90 Vdc C47F-30 180 C46F-30 ±180 Vdc C47F-40 360 C46F-40 C47F-10 1.75 C46F10 ±360 Vdc 1.0 Adc C47F-20 1.0 C46F-20 0.75 Adc C47F-30 0.6 C46F-30 0.4 Adc C47F-40 0.4 C46F-40 0.25 Adc C47F-10 0.15 C46F-10 0.3 Ohms On Resistance C47F-20 0.35 C46F-20 0.7 Ohms (See Note 3) C47F-30 1.0 C46F-30 2.0 Ohms C47F-40 2.0 C46F-40 Leakage Current at Rated Voltage 1.0 Surge Rating (% of Rated) <1 sec 200 Turn-On Time 3 C46F-10,30,40 1.5 C46F-10 C47F-10 C47F-20,30,40 Turn-Off Time 1.0 4.0 Ohms 1.0 mAdc 200 % 3 ms 5 ms 1.0 ms C47F-10 700 C46F-10 700 pf Output Capacitance C47F-20 350 C46F-20 350 pf (Typical) C47F-30 300 C46F-30 300 pf C47F-40 250 C46F-40 250 pf Insulation Resistance 109 109 Dielectric Strength (Input to Output) 1500 1500 Vac Capacitance (Input to Output) 10 10 pF C46F/C47F 18 Ohms FEATURES/BENEFITS • Power FET Output with Very Low On Resistance: Virtually no offset with low leakage and voltage drop. • Switches High Voltages and Currents: Voltages to 360 Vdc. Current to 1.75 Adc. DC, Bi-directional or AC models • Optical Isolation: Isolates control elements from load transients. Eliminates ground loops and signal ground noise. • Floating Output: Allows for high and low side switching. • High Noise Immunity: Control circuit can not be triggered by output switching noise. • 14-pin DIP package DESCRIPTION These miniature solid-state relays utilize a photovoltaic generator driving high performance power FET chips to provide low output onresistance and high output switching capability. The series includes DC switching versions with output current ratings up to 1.75 amp, and bidirectional versions to switch AC or DC up to 1.0 amp. Output voltage ratings of both types range from 50 to 360 volts. The virtual elimination of offset voltage makes them ideal for low level switching applications as well. Input and output are optically isolated to protect input logic circuits from output voltage transients. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE © 2002 TELEDYNE RELAYS C46F/C47F\072002\Q1 Series C46F/C47F CHARACTERISTIC CURVES MECHANICAL SPECIFICATION © 2002 TELEDYNE RELAYS TYPICAL INTERFACE (800) 284-7007 • www.teledynerelays.com C46F/C47F 19 C46F/C47F\072002\Q1